Question about Chrysler Town & Country
How to change the all control arm
On what post your question on youtube but make and model it is there if you post your question right ,good luck
Posted on Dec 03, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you torn the ball joint out, you very well could have more damage.
If you plan on doing the work yourself, I would put the car up on stands, and take the front wheel off, and do a through examination of the whole assembly.
Once you have a complete assesement of all of the damage you can go to your local parts house and get the parts.
If you have to replace the lower arm, you will need probably need some specialized tools (like a spring compressor).
After you're done changing parts, you will need to get a front end alignment.
Posted on Jul 27, 2008
I just did this job on my 98 regal, and I own the service manuals also. The lower control arm bushing that usually goes, is the front one. The rear one doesn't usually go, it is horizontally mounted. The front one for some reason is vertical. The control arm must be removed, and put in a vise. The front bushings outer metal sleeve, must be driven out with a chisel. It comes out easily. The new bushing can be tapped in with a hammer. Hope this helps!
Posted on Mar 01, 2009
pressed in but can be removed by cutting with a hacksaw in reverse so to speak ,remove blade and push through bush to cut out the metal casing then pull new ones through with a long bolt and socket
Posted on Apr 11, 2009
You can replace them seperately,but they need pressed out and in. Other methods of removing and installing likely will damage control arm.
Posted on Apr 23, 2009
SOURCE: lower control arm
pretty straight forward,
you will need bar for refitting plus the 2 bolts are hard to access by engine I did mine without lifting engine but a bit fiddley
3hrs both sides.
hope this helps
Posted on Jul 07, 2009
Tips for a great answer:
Feb 17, 2015 | 2006 Mercury Milan
Mar 25, 2014 | 2005 Buick Rainier
Nov 04, 2013 | 2004 Mitsubishi Endeavor
Sep 22, 2012 | Cars & Trucks
Jan 24, 2011 | 2000 Ford Focus
Oct 07, 2010 | 2003 Mercedes-Benz S-Class
Jun 24, 2009 | 2002 Ford Explorer Sport
Apr 23, 2009 | 1998 Ford Expedition
Feb 10, 2009 | 1998 Buick Century
Jul 02, 2008 | 2008 Ford Mustang
19 people viewed this question
Usually answered in minutes!