Question about 2003 Saab 9-3 Linear

1 Answer

Your question: "I have a 03 saab 93 with this codes p1312,p0411,p0245,p0201,p0202
The problem is when I start the car, it shakes and smells like gasoline but it's just at the back of the car

Your question: "I have a 03 saab 93 with this codes p1312,p0411,p0245,p0201,p0202
The problem is when I start the car, it shakes and smells like gasoline but it's just at the back of the car " exhaust "
The funny thing is, that it doesn't do it every time I start the c..."

Posted by on

Ad

1 Answer

The codes are on the internet

Type: OBD PO201

2003 Saab OBD P1312

OBD PO 245

Posted on Dec 02, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Aley_77
  • 6 Answers

SOURCE: smoke from exhaust

you put 2 many oil in the engine

Posted on Jun 01, 2009

Molson02536
  • 3854 Answers

SOURCE: Hi, I have a 2000 Saab 93. The engine light is on.

P1312 is ignition coil knock detection cyl 1 and 2 and the cause is quoted as wiring open circuit/short to positive, ignition coil assy, ECM.
P1334 is as 1312, but cylinders 3 and 4.

The other thing to that would cause detonation too is low fuel octane causing detonation during acceleration. Or dirty fuel injector and dirty fuel filter. Timing would cause this but i don't think your timing is off since you can get it started. Recap, add fuel injector cleaner to your gas tank for the next 3 fill ups and try using a higher octane rated fuel like 91 and replace the fuel filter for now and see if there are any improvments. keep me posted, be glad to help.

Posted on Jun 25, 2009

  • 105 Answers

SOURCE: WHAT DOES ENGINE COE P502 MEANS ON A 2000 SAAB 93

The Code you're referring to should be a "P0502." What the Code signifies is: "Vehicle speed sensor circuit, low input."

Posted on May 18, 2010

  • 1857 Answers

SOURCE: 2004 Saab 93: A/C doesnt turn off, car now wont start

remove the AC relay to shut the AC off all the time. Not sure why it wont start but you may havea security lockout. Fully charge the battery to proceed.

Posted on May 31, 2010

  • 60 Answers

SOURCE: I have a saab 93 1.9 TiD with a non starter issue.

Is this a diesel? Some say it could be an EGR valve issue

Posted on Aug 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trouble code P1312


Fault location, ignition coil---knock detection, cylinder 1&2 probable cause, wiring open circuit/short to positive, ignition coil assembly, ECM

Oct 23, 2015 | 2004 Saab 9-3

1 Answer

I have a saab 93 2002 with engine codes,p1110,p1312 and p1334 showing can anyone please tell me what they mean!


CODES P1312 AND P1334 These codes are related to the DI Module. Check the DI Module. Replace it if needed and clear the codes.

CODES P1110 Code P1110 is related to the Turbo Bypass Valve, check the vacuum lines at the Bypass Valve and especially at a vacuum sensor mounted on the firewall driver's side. The lines become loose with age and will pop off or can become disconnected when someone is reaching behind the for other reasons.

Jun 03, 2015 | 2005 Saab 9-3 2.0

1 Answer

Obo scanner gave me these codes p0171, p0201, p0202, p0203, p0204, p0321 and it wont start? please help i noe what the codes mean just dont noe what to go for


I will give you what the codes mean and you can then work out what to replace.
code p0171 refers to system too lean--bank 1===causes intake / exhaust leak---AIR system---MAF/VAF sensor---fuel pressure/pump---injector/s---HO2s
code p0201 refers to injector 1--circuit malfunction===causes--- wiring--injector ---ECM
code p0202 refers to injector 2 --circuit malfunction===causes --wiring---injector--ECM
code p0203efers to injector 3 --circuit malfunction===causes---wiring--- injector --ECM
code p0204 refers to injector 4 --circuit malfunction===causes ---wiring ---injector ---ECM
code po321 refers to crank shaft position (CKP) sensor/engine speed (RPM) sensor---range / performance problem===causes---air gap---metal particle contamination---insecure sensor /rotor --wiring---CKP/RPM sensor.

Jan 05, 2014 | Audi TT Cars & Trucks

2 Answers

2006 pacifica idles high and codes P0201 & P0202


Hate to say it but it could probably be you PCM.

Jan 19, 2013 | Chrysler Cars & Trucks

1 Answer

Cylinder head torque specs for opel corsa 8valve 1.4l 2005 model


Corsa 1.4I Engine code Z14XE 2000-2004
Bolts must be renewed
stage 1. 25Nm
stage 2, + 90 degrees
stage 3. + 90 degrees
stage 4. +90 degrees
stage 5. + 45 degrees
Sequence
10 6 2 3 7
9 5 1 4 8
bolts 7 & 8 are nearest to the flywheel side of the engine
Engine code C14NZ 1993-1998
Stage 1. 25Nm
stage 2. + 60 degrees
stage 3. +60 degrees
stage 4. + 60 degrees
Sequence as above.
Corsa 1.4I Engine code Z14XE 2000-2004
Bolts must be renewed
stage 1. 25Nm
stage 2, + 90 degrees
stage 3. + 90 degrees
stage 4. +90 degrees
stage 5. + 45 degrees
Sequence
10 6 2 3 7
9 5 1 4 8
bolts 7 & 8 are nearest to the flywheel side of the engine
Engine code C14NZ 1993-1998
Stage 1. 25Nm
stage 2. + 60 degrees
stage 3. +60 degrees
stage 4. + 60 degrees
Sequence as above. <br />Corsa 1.4I Engine code Z14XE <b>2000-2004</b><br />Bolts must be renewed<br />stage 1. 25Nm<br />stage 2, + 90 degrees<br />stage 3. + 90 degrees<br />stage 4. +90 degrees<br />stage 5. + 45 degrees<br />Sequence<br />10 6 2 3 7<br />9 5 1 4 8<br />bolts 7 & 8 are nearest to the flywheel side of the engine<br />Engine code C14NZ <b>1993-1998</b><br />Stage 1. 25Nm<br />stage 2. + 60 degrees<br />stage 3. +60 degrees<br />stage 4. + 60 degrees<br />Sequence as above.

Jan 09, 2013 | Opel Corsa Cars & Trucks

1 Answer

Missing error code P0201


It is an injector malfunction on cylinder #1 and #2. Below average fuel pressure, clogged fuel filter, defective fuel reg., injector and wiring, water in fuel, spark plugs and wires, could cause your problem.

May 13, 2009 | 2000 Dodge Durango

Not finding what you are looking for?
2003 Saab 9-3 Linear Logo

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...