Question about Infiniti G20
Just I want to Know where it's locate the fuel pump inside or outside of the fuel tank and where its locate the tank behind teh rear seats or below trunk.
It's in the gas tank attached to the float assembly.
Somewhere on the gas tank, find where the tubes connect. They'll connect to a round disk shaped thing about 5" to 6" in diameter that's bolted to the tank. The pump is one of the things attached to the other side of that disk inside the tank. The rest of what's attached to the other side of that disk loosely resembles a toilet valve assembly in a toilet tank.
Google images for "1992 infiniti g20 fuel pump float assembly" to see what it all looks like. Google again but leave off 'float assembly' to see pictures of just the pump.
Posted on Dec 02, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
First you will need to releave fuel pressure......
next remove the rear seat cushion to gain access to fuel pump access panel.....
Removing Fuel Pump....
Posted on Jan 29, 2009
SOURCE: need to know if i
here are step by step instructions on the removal and installation of your fuel tank and fuel pump.
please do not forget to rate and comment about your experience with fixya today.
Removal & Installation
WARNING If the modular fuel sender assembly is retained by a snapring, it may spring up from its position. When removing the modular fuel sender from the tank, be aware that the reservoir bucket is full of fuel. It must be tipped slightly during removal to avoid damage to the float.
Install or connect the following:
NOTE Gently pull on the fuel pump reservoir to assure it is secure. If not secure, replace the entire fuel sender.
Posted on Apr 17, 2009
Below are the proper steps to removing your vehicle's fuel tank..
Disconnect the negative battery cable.
Relieve the fuel pressure
Remove the rear seat cushion.
Remove the plastic grommet from the floor pan.
Detach the fuel pump electrical harness.
Disconnect the fuel lines from the fuel pump by compressing the tabs on both sides of each nylon push connect fitting and easing the fuel line off of the fuel pump.
Raise and safely support the vehicle securely on jackstands.
Remove the muffler mount.
Remove the heat shields.
Remove the fuel tank cover.
Remove the drain plug and drain the gasoline into a approved container.
Disconnect the fuel lines and remove the fuel filter and base.
Loosen the fuel tank filler pipe clamp at the fuel tank.
Support the fuel tank using a hydraulic jack and a block of wood or other suitable device.
Remove the two fuel tank support strap bolts and position the straps out of the way.
Partially lower the fuel tank to access the fuel tank filler pipe vent tube and disconnect the vent tube and filler pipe from the tank.
Disconnect the fuel vapor tube from the tank.
Lower the tank from the vehicle.
Installation is the reverse of the removal procedure.
Posted on Apr 23, 2010
Tips for a great answer:
Jan 14, 2014 | 1998 Mitsubishi 3000GT
Oct 08, 2011 | 1993 GMC Sierra
Fig. 2: The fuel pump and fuel gauge sender assembly
Feb 27, 2011 | GMC Safari Cars & Trucks
Mar 16, 2010 | 1991 Geo Tracker
Oct 06, 2009 | 1985 Ford LTD
Aug 25, 2009 | 2000 Jeep Grand Cherokee
May 18, 2009 | 2002 Ford F250 Super Duty SuperCab
Mar 23, 2009 | 1996 Ford Taurus
144 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: