Question about 2010 Nissan Note 1.6

Open Question

How do I remove facier to replace cigarette lighter nissen note 2010

Unable to remove plastic facier lighter fixed to

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 977 Answers

SOURCE: Cigarette Lighter Outlet Problem

check all of your fuses ,a blown fuse might be the problem, the cigarette lighter usually is on the accessories fuse as is your interior courtesy light the fuse box is probably under the bonnet but there may be one under the dash as well....hope this helps ....cheers

Posted on Jul 07, 2010

Ad
emissionwiz
  • 76682 Answers

SOURCE: Fuse keeps blowing for cigarette lighter 2002 Nissan Sentra

Replace the lighter it is shorted out, the lighter is Held in by a big stamped nut on the bank of the threaded barrel.

Posted on Jun 27, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the cigarette lighter


You have have to unscrew and remove some of the plastic on the left side of the ash tray, then reach behind the lighter and the housing will unscrew from around the lighter. But first pull the fuse and after plastic removal unplug the wire or wires from the lighter. Then proceed in reverse to install

Aug 27, 2014 | 1997 Jeep Grand Cherokee

1 Answer

VW T28 84 TDI Transporter cigarette lighter not working


There are at least two reasons why this could be happening. Firstly (and this has happened to me) there could be a foreign body dropped inside the lighter socket, preventing electrical contact. Have a look and remove. Secondly the fuse to the cigarette lighter may be blown. Beware! Fuses do not blow without a reason. If blown, it could be that a conducting foreign body may have been dropped into the socket. Remove the fuse cover and locate the appropriate fuse. DO NOT REPLACE WITH A HIGHER AMPERAGE FUSE. Should be no more than 20 amps. If the fuse blows again, try the lighter on another vehicle. ( A good friend??) If that blows the fuse too then the lighter is faulty with a low resistance. If not then the lighter circuit on the vehicle needs to be checked by an auto electrician. Good luck!
Cheers, Don.

Jul 07, 2014 | 2010 Volkswagen Multivan 3.2

2 Answers

2010 ford fusion-how can i replace fuse for cigarette lighter


look under hood for fuses & should be Ft Aux fuse.

Dec 25, 2013 | Ford Fusion Cars & Trucks

1 Answer

Hi, I need to replace the cigarette lighter in my 2005 Mazda 6. I use a cigarette phone mount and the current cigarette lighter hole moves when the mount is placed in and a small piece of plastic has...


Before replacing lighter socket, try gluing it with super glue. Sounds like your only problem is that socket is moving because of broken plastic. Or you can buy aftermarket accessory plugs from autoparts stores and you can get them with up to three outlets for multiple plug ins.

Jan 07, 2011 | 2005 Mazda 6

1 Answer

Where is the fuse for the front cigarette lighter?


You can find the fuse box on the drivers end of the dash under a cover(called Junction Block) . Remove the plastic cover, and look on the back for the diagram to see which fuse to replace. Fuse 31 of 20 Amp is the cigarette lighter fuse.

Dec 02, 2010 | 2002 Jeep Liberty

1 Answer

Where is the fuse box for the cigarette lighter of a 2006 Toyota Highlander?


In the 2006 Model the Cigarette lighter is located behind the small compartment on the drivers side dashboard left of the steering wheel. Simply lower the compartment door (Fuse box cover) and remove it to access the fuses. Jul 2010

RGC

May 20, 2010 | 2006 Toyota Highlander

2 Answers

Problem with the cigarette lighter - Cobalt 2010


It's the 20 amp fuse marked OUTLET under the hood.

Feb 11, 2010 | 2008 Chevrolet Cobalt

1 Answer

My 2004 Audi A4 Cigarette lighter socket surrounding broken


Hello, hope this info helps...(subytech1)...Cigarette Lighter In Center Console, Removing And Installing (Vehicles Up To 10.04)

Special tools, testers and auxiliary items required




  • Torque wrench V.A.G 1783



1-Cigarette lighter
  • Removal:
  • Remove center console.
  • Turn center console - 4 - around.
  • Remove two bolts - 3 - on cigarette lighter - 1 -.
  • Disconnect harness connector - 2 -.
  • Remove cigarette lighter - 1 - from recess - 5 -.
  • Installing: Installation is reverse of removal.
2-Connector3-Screws, (2x)
  • Tightening torque 2 Nm
4-Center console5-Cut-out

Aug 07, 2009 | 2004 Audi A4

2 Answers

The cigarett lighter outlets do not work.


Most likely you have something metallic that entered/fell inside one of the cigarette lighters.

I once found a dime inside a cigarette lighter which my children assured me was placed there by a shadowy personage named "Notme". Go figure.

While the fuse is REMOVED, look inside each lighter with a flashlight and remove the foreign material.

If you find nothing inside the lighters, disconnect them all from the electrical system by removing the single wire attached to the rear of the lighters. Replace the fuse.

Alternately, you can disconnect them one at a time, replacing the fuse after each one. You may need a few fuses for this.

If the fuse blows after ALL the lighters are disconnected, you have a wiring short circuit which is best diagnosed by a professional.

If the fuse does not blow, begin reconnecting the lighters until you see a spark, or the fuse blows again. This is the faulty lighter, replace it and your problem is solved.

Note: You cannot get shocked or electrocuted by your car's 12 Volt system but you can be burned by heavy sparking. You can reduce the risk of heavy sparking by using a lower-rated fuse during the testing. Wear saftey goggles and latex gloves for safety.

Good luck

Jul 03, 2009 | 2001 Pontiac Grand Prix

2 Answers

02 accent ciggarette lighter wont work


They hyundai service manual says the following.

(1) After removing the ashtray remove the facia panel mounting screws
(2) Then disconnect the connector from cigarette lighter
(3) Disconnect thermal fuse case from socket end
(4) Remove the ring nut and separate cigarette lighter socket from the thermal protector.

I hope this helps. I have never had to replace one (yet) so I can't give exact directions. Even if the fuse looks good you may want to replace it and see if that fixes it first. Sometimes they have miniscule hairline cracks that are hard to see. Hope this helps

Feb 12, 2009 | 2002 Hyundai Accent

Not finding what you are looking for?
2010 Nissan Note 1.6 Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...