Question about 2003 Ford Expedition

3 Answers

How do i fix my 2003 ford expedition i put a fuel pump in and now the fuel gage just reads empty

I rebuilt the fuel pump and now the fuel gage reads empty

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 33 Answers

PULL IT ALL BACK OUT AND RE-SEAT ALL YOUR WIRING MAKE SURE THERE CLEAN AND WELL CONNECTED,MOST OF ALL MAKE SURE YOUR FLOAT IS CONNECTED AND BY THE WAY IT ONLY GOES IN ONE WAY FOLDED UP OR DOWN .IF IT CLICKS WHEN YOUR MOVING IT GO THE OPPOSITE WAY,IM NOT SURE WHICH WAY FOR THIS PARTICULAR MODEL, IF ITS STIFF AND ONLY GOES 3/4 OF THE WAY UP THEN MANEUVER HOWEVER YOU HAVE TO CAUSE THE LEAFLETS IT USES AS HEIGHT AND DEPTH GUIDES ARE THIN AND FRAGILE,IF YOU BREAK THEM PULL THE PUMP AND SWAP IT WITH A NEW HOUSING,HOPE IT HELPS.

Posted on Jan 07, 2015

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 103 Answers

I agree with the post above, some wire is not making good contact which I'm sorry to say means you have to take it out again. Only other suggestion I have is check the plug and jack to be sure you didn't bend or break a pin or contact while plugging and unplugging it. Good luck with fixing it.

Posted on Dec 02, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,171 Answers

You didn't get the ground wire clean and connected tight where the wires plug in at the tank. Ground is the only thing that will cause this.

Posted on Dec 01, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel pump fuse for a 2003 ford expedition 5.7 motor


images for Fuel pump fuse for a 2003 ford expedition 5.7

F150 & Expedition No Start P1233 Fuel Pump Driver ...

? 11:47
https://www.youtube.com/watch?v=S-ryMAsHKos
Jan 15, 2014 - Uploaded by FordTechMakuloco
You can get the new updated Fuel Pump Driver Module Here- Ford Kit Version- ... i have a question i have a ...

Jan 11, 2016 | 2003 Ford Expedition

1 Answer

2008 Escape Fuel gage reads empty


Do you know if they also replaced the sending unit in the tank ?
It could also be a problem with the gauge on the dash.

Jul 08, 2013 | 2008 Ford Escape

1 Answer

2003 for expedition. I have a continuous clicking sound coming from the back of my SUV. Its not the heater door because that has already been fixed and the noise is constant when the tuck is running. It...


the fuel pump is in the tank but if it gets loud enough it can be heard inside the car. try take off the gas cap and putting your ear to the tank and see if sounds like it is coming from within

Apr 07, 2011 | 2003 Ford Expedition

1 Answer

Fuel guage not working


Testing the fuel gage requires accessing the harness from the fuel pump and grounding the yellow / white wire with 160 ohms resistance this should cause the gage to read full, and with the circuit open you should have the gage reading empty. If the gage works in this order then the likely failure is the sending unit in the tank , and will require replacement.

May 30, 2010 | 1999 Ford Expedition

2 Answers

Gas gage read full when empty and sometimes emty


You have a bad fuel level sensor.The fuel tank needs to come out and the sensor replaced.You don`t have to replace the pump assembly.You can get the level sensor separate.I`m not sure if the parts stores have it but I know the dealerships do.Hope this helps.Good luck.

Mar 16, 2010 | 2004 Pontiac Montana

1 Answer

Fuel tank


Ok look for a desconected or not installed negative, wire in the work area you was working

Oct 20, 2008 | 1984 Ford F 150

2 Answers

2003 Cadillact CTS


sometimes beleive it or not its the gas cap is not sealing right

Jul 07, 2008 | 2003 Cadillac CTS

Not finding what you are looking for?
2003 Ford Expedition Logo

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...