Question about 1999 Daewoo Lanos

Open Question

Daewoo lanos 1999 ecu wiring diagram please

Wiring diagram for ecu

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

MobyMech
  • 106 Answers

SOURCE: fuel pump on Daewoo Lanos 1.3

Hi

If my memory serves me right the Lanos has an immersed pump, and therefor you need to be looking either under the rear seats or in the luggage compartment for a round metal or plastic cover which when removed will uncover the top of the pump and fuel sender unit.

It is probably held in place by a large plastic or metal ring which either has to be unscrewed or just turned slightly to disengage the securing lugs.

PLEASE DISCONNECT THE BATTERY NEGATIVE TERMINAL BEFORE MESSING WITH THE PUMP OR YOU MAY HAVE AN EARLY FIREWORKS DISPLAY!!!

Just as a matter of interest, I assume when you say FLUIDS you actually mean FLOODS, in which case, the problem isn't the pump.

If the car doesn't start, or struggles to do so, and there is a smell of fuel or the plugs are getting wet, then the problem is more likely to be a lack of spark than anything else.

There are other scenarios, such as a faulty coolant sensor (cold engine), a faulty O2 sensor (hot engine), a faulty throttle position sensor (hot or cold engine), and a few others I could mention.

If you require any further help, just click ASK ME under my strange white round faced picture (which my MRS reckons looks just like me!!) and I shall be more than happy to assist you further.

Regards

Geordie

Posted on Jun 25, 2008

jrosario
  • 2 Answers

SOURCE: !999 Daewoo Lanos

201b665.jpege046938.jpeg

It verifies well the year, it is of one of 1999

I hope that it should serve you

Posted on Oct 21, 2008

freetek
  • 5568 Answers

SOURCE: I Need A Tacho Wiring Diagram for a 1998 Daewoo Lanos

This site offers the manual for your car as a download for $9 US which is about half the cost of hardcopy from Haynes or Chilton: 
TradeBit car manuals 
I've always found having the manual for any car is my first priority when buying a new horse for the stable; they always pay you back.  

Posted on Oct 27, 2008

stormbrewin
  • 426 Answers

SOURCE: need the paint code for

The numbers and code you require are on one of the two silver aluminium compliancy plates which are riveted inside the engine copartment.

Posted on Oct 30, 2008

emjem74
  • 162 Answers

SOURCE: Daewoo Lanos Engine Number

should be on a small seperate plate located no the front of the engine compartment. if not there then check on the back of the engine compartment for a small section with your serial stamped into it. if there are none of the above then i would check for stolen recovered.

Posted on Feb 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which is the color and position of the daewoo lanos 2001 camshaft wiring circuit


Note the diagram. The black wire is ground. The pink wire is voltage, fuse protected circuit, hot with key on. The brown wire with white tracer is signal wire goes to computer.

26134204-5ugelrxrd5vvz515nv4yldsb-1-0.jpg

Mar 18, 2016 | 2001 Daewoo Lanos

1 Answer

Please show me a picture that shows the position of oxygen sensor on a daewoo lanos 1999 model 1.6 litre


Oxygen Sensor

1999 Daewoo Lanos 1.6L MFI DOHC 4cyl

The Oxygen Sensor is located: Under hood, driver side, lower engine area, above exhaust pipe flange, mounted in exhaust manifold,don't have a picture.Here's a link to what it look's like just remove the electrical connector,get a open end wrench and remove.. http://www.autozone.com/engine-management/oxygen-sensor/bosch-oxygen-sensor/daewoo/lanos/1999/4-cylinders-6-1-6l-mfi-dohc/4971_102074_1784_97999

May 25, 2015 | 1999 Daewoo Lanos

1 Answer

WHAT DOES daewoo p0342 IMPLY?


code p0342 refers to camshaft position sensor(CMP) sensor A bank 1 --low input== causes wiring short to ground--CMP sensor--ECM
check wiring and connections , replace the position sensor

Aug 12, 2014 | 1999 Daewoo Lanos

2 Answers

2000 Daewoo Lanos engine fans run constantly


which temp sensor did you replace the one with one wire is for the gauge on the dash and the one with two wires is for the ecu the ecu controls the cooling fans so if this sensor is faulty the ecu will switch the cooling fans on because it does not know what temperature the engine is at check you have rplaced the right sensor

Jan 06, 2009 | 1999 Daewoo Lanos

1 Answer

I Need A Tacho Wiring Diagram for a 1998 Daewoo Lanos


This site offers the manual for your car as a download for $9 US which is about half the cost of hardcopy from Haynes or Chilton: 
TradeBit car manuals 
I've always found having the manual for any car is my first priority when buying a new horse for the stable; they always pay you back.  

Oct 27, 2008 | 1999 Daewoo Lanos

Not finding what you are looking for?
1999 Daewoo Lanos Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...