Question about Cars & Trucks

1 Answer

Mercedes benz s 320. Model 1999, brake light not working at the same time gear lever not shifting.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 36 Answers

Pedal to brake light swithch, it in synch with brake/shiftter saftey switch. in other words brakehas to be pressed in order for it to be taken out of park

Posted on Dec 01, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ilragatzzo78
  • 241 Answers

SOURCE: service c light is on

it's time to go to the shop.
oil service
cabin filter
air filter
probably tire rotation
tune up either check up or perform.
do not go to a cheap place it will cost you lots more.
inspection of suspension, fluids, lubrication.
probably brake fluid flush.
probably coolant flush
possibly tranny service

Posted on Jan 08, 2009

  • 12 Answers

SOURCE: 2005 mercedes benz 320 diesel

These instructions will work from 09/01/2003 and up 211 Model E Class Mercedes
1. Insert igntion key, switch to position "1"
2. press the page button (looks like a page in front of another page. Use the one with the writing on the rear page) on the steering wheel controls repeatedly until the mileage is displayed within the multifunction display.
3. Press the cluster illumination button 3 times in short succession. The battery voltage will be displayed.
4. Press the up or down arrow buttons until the service menu appears.
5. Use the + and - buttons to select the menu option "confirm"
6. Press the page button on the steering wheel until " complete service" is selected.
7. Confirm "Complete Service" with Page Button. The display will show "Service Confrimed"

Posted on May 29, 2009

jasperoni
  • 203 Answers

SOURCE: timing marks

this is an easy one to time. the timing mark for the crank is 0 degrees-do not attempt to tum crank if cam timing is out. there is no distributor on this engine-it is advanced with your intake camshaft. The intake camshaft is the only tricky part to time. Be very careful because at 2500 rpm this cam actually moves forward via cam advance solenoid. It will hit your crank if not timed properly! so with your crank at o degrees-camshafts out of head if you need to turn engine to line up crank-on the exhaust cam(your left)behind the gear(on flange) there will be a hole big enough to put a small punch in that will line up with the top of the deck surface on the outer side(to the left). Now on your intake cam(your right) it will be just the opposite. the hole on the back side of the gear flange will line up on the right with the to p the deck surface. once in line hold intake cam and turn the gear(advancer) all the way to the right)-very important. You will have to start with you intake(put chain on) then line up your exhaust and install timing chain tensioner. always turn engine 360 degrees and recheck before you proceed. At least your at top dead center and you can visually see the lobes on both cams mostly straight up. hope I have been helpful.

Posted on Jun 13, 2009

mx5turbo92
  • 545 Answers

SOURCE: i need the mercedes benz 1999 clk 430 radio code

AR82.60-P-7502-01A Coding Radio
(MODEL all with CODE (750) Radio Becker Europa 2000 with CODE (751) Radio Becker Grand Prix 2000 with RDS)

  1. If the radio is disconnected from the power supply, it is not operational when re-connected. After switching on the ignition and the radio, the readout CODE appears in the display.
  2. The code number for the radio is advised to you on the enclosed CODE CARD.
  3. To enter the first digit of the code number, you have to continue pressing station button 1 until the correct digit appears in the display. Adopt the same procedure for the second, third and fourth digits.
  4. Once you have entered the correct code number with the station buttons 1, 2, 3, 4 and confirmed the entry with the SEEK button (press down), the readout CODE disappears. The radio can now be operated.
  5. If you enter a wrong code three times, you must wait 15 minutes before making a new entry. In addition, if 9 incorrect entries are made, the radio will then not operate for 24 hours. During this time the radio and the ignition (terminal 15) must remain switched on.
AR82.60-P-7502-01B Coding Radio
(MODEL all with CODE (353) Audio 30 APS with CODE (510a) Radio MB Exquisit with traffic news decoder, with RDS (Becker) with CODE (512a) Radio MB Special with traffic news decoder, with RDS.)

  1. If the radio is disconnected from the power supply, it cannot be operated by simply reconnecting. After switching on the ignition and the radio the word "CODE" appears in the display on the radio.
  2. The code number for the radio is given on the enclosed CODE CARD.
  3. Enter the code number with the station button, e.g. number 1, station button 1. After entering the first number the word "CODE" disappears and the number entered appears followed by 4 dashes. The next character to be entered flashes. After entering all five numbers, the first character starts flashing again. In this state the code number can be written over as frequently as desired. A correction can be made only by entering the complete code number again.
  4. Confirm code number: Press TUNE, AUTO/SEEK or SC button. The radio automatically switches on and indicates the radio station or frequency stored with station button 1.
  5. If an incorrect code number is entered and confirmed, the word "CODE" appears again on the display. If an incorrect code is entered three times the word "WAIT" appears on the display and the radio locks up for approx. 10 min. If the code is entered incorrectly three times again the radio locks up again for 10 min. Three more incorrect entries (a total of 9 incorrect attempts) increase the lock-up time to 60 min. Another three incorrect entries lock up the radio for another 60 min. The waiting time runs only when the radio is switched on.

Posted on Dec 17, 2009

  • 1 Answer

SOURCE: my clk 320 mercedes wont shift into gear? what is

just had the same problem today...there is a small square false door just below the D on the shift plate...the tow guy put a pen into that door and i was able to shift it out of park. now the car won't shift gears as i drive because the car is in 'safe mode'. disconnect the battery to correct. the shifting issue is still unsolved but it appears to be an electrical issue in the transmission but NOT the actual transmission. hope this helps

Posted on Apr 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 mercedes benz ml 430 gear is locked in park


The 2000 Mercedes models all utilize a Shift Interlock, which will only allow the vehicle to be shifted out of Park while the brake is applied. The way this works is that a lock pin holds the shift lever in the Park position until a solenoid is powered by the brake light circuit, pulling the lock pin away from the shift linkage. The wire to the solenoid may come loose, or the brake light switch may fail. If someone tried to remove the vehicle from Park without applying the brake, the end of the lock pin may have become jammed. Try two things: 1) Start the vehicle, put your foot on the brake, and attempt to move the shift lever from Park to Reverse. 2) If you cannot remove the vehicle from Park, are the brake lights coming on? If not, a) replace the 15A fuse for the brake light circuit, and b) try Step 1 again. 3) If you cannot remove the vehicle from Park and the brake lights are coming on normally, locate the interlock solenoid at the shift lever and make sure it is properly connected. When you put your foot on the brake, the solenoid should retract. If it does not, check for 12V at the solenoid when you put your foot on the brake. If you have voltage, replace the solenoid. If you do not have voltage, you have a broken wire between the brake light switch and the solenoid. If the solenoid retracts but you still cannot remove the vehicle from Park, your shift linkage may have become bent at the transmission linkage. Hope that's helpful! :)

Jul 01, 2011 | 2007 Mercedes-Benz ML320 CDI

1 Answer

My 1999 clk 320 suddenly will not shift out of 3rd gear, its been going good for 184000 miles and all service has been done by a mercedes mechanic


sounds like the transmission is in limp home mode where it won't shift out of second gear. this is a fail safe mode. If the check engine light is on too then its probably not seeing one of the speed sensors in the transmission. Just need to have the codes pulled in the transmission control module.

Oct 01, 2010 | 1999 Mercedes-Benz CLK

2 Answers

2000 s-500 mercedes won't shift from park to drive poppa_lou739@yahoo.com.


I have S500 2002 and it seems the car when in drive is stuck ina lower gear. The techtronic shifter will not go into any other gears but neutral and park. car seems like its in low 2 or 3 gear def not drive. car revs a lot higher. also recently had ESM shifter replaced/rebuilt

Aug 30, 2010 | 2001 Mercedes-Benz S-Class

1 Answer

Brake lights are stuck on all the time. 320 2002 Mercedes


You have a simple plunger switch on the brake pedal. This can be lubricated or replaced. Simple job.

Nov 30, 2009 | 2007 Mercedes-Benz ML320 CDI

1 Answer

Transmission wont shift out of park


Try checking the brake light sending unit. Are your brake lights even working. Many newer vehincles will not shift out of park unless the brake pedal is depressed. However, a faulty sendind unit located on the pedal itself can keep you from moving anywhere. Just check to see if your brake lights are working to know if the sending unit is working.

Apr 30, 2009 | 2004 Mercedes-Benz Mercedes Benz S Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...