Question about 1998 Mazda B-Series

1 Answer

How to change a fuel pump on a 98' Mazda B4000

Replaced the fuel filter but still losing power while I am driving

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 5,618 Answers

Could be catalytic con.?

Posted on Dec 01, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

stormbrewin
  • 426 Answers

SOURCE: 1996 mazda mx6 ls cranks but won't start

you may need to run a wire from a keyed ignition source that has power while cranking and running to the fuel pump relay and bypass the pcm to test wether it will run, if it runs put a more permanent wire in place.Not too sure what tests youve done but it seems that fuel is what your focusing on so a quick test is too spray engine start up the intake tube to see if the engine trys to run if it does it eliminates a lot of other potential reasons for a no start condition.Also try squeezing the fuel return line to see if the added pressure will try to make engine run.Could be time to replace fuel pump etc anyway let me know how it goes good luck with it

Posted on Dec 12, 2008

  • 1 Answer

SOURCE: Mazda B4000 Fuel Filter replacement

remove the bracket from around the filter, and remove the clip from the fuel line, and it should pop right off.

Posted on Dec 23, 2008

emissionwiz
  • 75066 Answers

SOURCE: Location under hood for fuel pump relay on 2002 Mazda Millenia S

JUST RELEASE THE PRESSURE AT THE FUEL PRESSURE TEST PORT ON THE FUEL SUPPLY RAIL THAT SUPPLIES THE INJECTORS, IT IS A METAL VALVE LIKE A TIRE VALVE, THAT IS THE FACTORY RECOMMENDED METHOD..

Posted on Mar 11, 2009

  • 1 Answer

SOURCE: changing rear brakes on 1998 mazda B4000

make sure your brake adjuster is backed all the way off then gently tap all the way around the back to remove

Posted on Apr 10, 2009

localwonder
  • 6784 Answers

SOURCE: how do i replace the fuel pump in my 1993 mazda 626 2.5

1. Relieve the fuel pressure and disconnect the negative battery cable.

2. If not already removed, depress the clips on each end of the rear seat cushion and remove the cushion.

3. If not already done, detach the electrical connector from the fuel pump/sending unit.

4. Remove the attaching screws from the fuel pump/sending unit access cover and remove the cover.

5. Disconnect the fuel supply and return hoses from the fuel pump/sending unit.

6. Remove the attaching screws and the fuel pump/sending unit from the fuel tank.

7. Detach the sending unit electrical connector, remove the sending unit attaching nuts and remove the sending unit from the fuel pump assembly.



To install:

1. Attach the sending unit to the fuel pump assembly and install the nuts. attach the sending unit electrical connector.

2. Install the fuel pump/sending unit into the fuel tank with a new gasket and install the mounting screws.

3. Connect the fuel supply and return lines.

4. Install the access cover and the mounting screws.

5. Attach the sending unit electrical connector.

6. Position the rear seat cushion over the floor, making sure to align the retaining pins with the clips. Push down firmly until the two retaining pins are locked into the rear seat retaining clips.

7. Connect the negative battery cable, start the engine and check for proper system operation and for fuel leaks.

Posted on Jun 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Mazda 1998 B4000 looses power when I drive and than the power comes back. It is intermitted . I was investigating and could be my fuel relay. I already changed the fuel filter and did not correc


Test fuel pressure when key on/ engine off, and when running and compare to specs. Could be bad fuel pump, relay, regulator, gas cap, injector failing.

Dec 02, 2014 | 1998 Mazda Pickup

1 Answer

How to change a fuel pump on a 1998 Mazda B4000 pickup


Wouldn't you want to do some testing, to actually find a problem,
before you continue to install parts for no reason?

Do that--- test things

Nov 30, 2014 | Mazda Cars & Trucks

1 Answer

Where is the fuel filter on a 1994 Mazda b4000 pickup?


Driver side frame rail right where the door is. It's held in by a large hose clamp. It has 2 white plastic clips . 1 on each hose of the filter. When removing have a container that can hold gas ready because about a pint of gas will come out. Make sure new filter comes with new clips. I don't recommend using old ones. After new one in place turn key on and leave in run position for 20 seconds so filter can gill with fuel before starting and inspect fir leaks.

Mar 15, 2009 | 1994 Mazda B-Series

1 Answer

2007 Mazda B4000 Fuel Pump Noise


sounds like he's trying to wait till the warrenty expires.... be on record as complaining about it during the warrenty period...
the only recall i could find was on the fuel tank itself and my search was in someways imcomplete.
this is about all i can find on your vehicle in regards to recalls
http://www.lemonauto.com/complaints/mazda/mazda_b_series.htm

Nov 19, 2008 | 2007 Mazda B4000

3 Answers

Mazda B4000 Fuel Filter replacement


remove the bracket from around the filter, and remove the clip from the fuel line, and it should pop right off.

Jun 21, 2008 | 2007 Mazda B4000

Not finding what you are looking for?
Cars & Trucks Logo

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...