Question about 1997 Chevrolet Blazer

1 Answer

Frontend wont lock in 97 blazer.? - 1997 Chevrolet Blazer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 1,147 Answers

Front end lock is vacuum actuated and if there is no vacuum from the shifter switch, it will not lock the front end. Make sure there is vacuum going down to the switch/valve on the shifter with it in 4wd and engine running, then find if there is vacuum coming out the other side of the switch on the tranny shift valve. On the right fender you will find the cable pull that the vacuum actuates to pull cable and put the front end in gear. Have someone watch while you shift into 4wd to see if the cable is pulled. Check there to see if there is vacuum coming to it when in gear. If there is no vacuum there then the shifter vacuum switch is bad or the line is not connected.

Posted on Nov 30, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frontend vibrition under load additinal random drift in frontend may be linked


have the cv joints ("U") joints checked for failing
the drift may be from them binding up when the angle for turn comes into play

Dec 27, 2015 | 2000 Chevrolet Blazer

1 Answer

By pass passlock on 97 chevy blazer


Check this site out!

http://newrockies.com/

Dec 14, 2014 | 1997 Chevrolet Blazer

1 Answer

97 gm frontend dosent lock in?


Check to find if there is vacuum to the cable pull that actuates the front end lock when engine is running and in 4wd. If not, there's no vacuum to the shifter switch or this switch is bad.

Nov 30, 2014 | 1997 Chevrolet Blazer

1 Answer

97 chevy blazer shifter wont go into park


Could be the key lock or the shift lock solenoid.

Jan 30, 2014 | 1997 Chevrolet Blazer

1 Answer

There is no drive shaft for the 4 wheel drive however the button got pushed and it sounds horrilble


button got pushed in, the front differential is now locked in, and your ring and pinion gears in the front are now turning when you drive. There must have been a problem with your frontend, or the driveshaft would not have been removed. I bet your front ring and pinion have damaged gears! Just curious, did you buy this blazer this way? Who removed the driveshaft?

Dec 10, 2013 | 2000 Chevrolet Blazer

1 Answer

My 97 blazer wont go in gear


the trans receives a signal from a censer that tells it you have applied the break, which allows it to shift. do your break lights turn on when you push on the break?

Feb 21, 2010 | 1997 Chevrolet Blazer

1 Answer

Front driver door wont close on 97 blazer


Make sure the latch hasn't already dropped into the locked positon. If it has pull on the door handle and raise up the latch.

Mar 18, 2009 | 1997 Chevrolet Blazer

1 Answer

My 97 blazer wont start, the selenoid kicks in but the gear in the starter will not???


does the engine turn but wont start if so crank sensor is bad,or no fire from the coil

Feb 23, 2009 | 1997 Chevrolet Blazer

1 Answer

1995 Chevy Blazer Wire Color Codes


95-97 blazer or 94-97 S-10
12volts red (there will be 2)+ ignition harness
Starter purple or yellow + ignition harness
Ignition pink + ignition harness
Second Ignition white or pink/white + ignition harness
Accessory orange + ignition harness
Power Lock lt. blue + either kick panel
Power Unlock white + either kick panel
Lock Motor gray drivers kick panel
Unlock Motor tan drivers kick panel
Parking Lights+ brown switch or rear harness
Door Trigger white - keyless module
Dome Supervision use door trigger
Trunk/Hatch Pin tied in with doors
Trunk/Hatch Release black/white + switch or keyless
Tachometer white AC ECM
Brake Wire white + at brake pedal switch
Parking Brake black at the pedal
Horn Trigger black - steering column

Jun 13, 2008 | 1995 Chevrolet Blazer

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...