Question about 2000 Mercedes-Benz S-Class

1 Answer

Suspension 2000 Mercedes s 430

I was driving home last night when I got home the rear was complete down like air suspension had fail then this morning under the car I found a small bracket about 5 in long when I look under the car it belong to the air level sensor it broke off can anyone tell me is this what the suspension went down sure use so help the dealer said the part was 225.00 ttomsauto@aol.com has this ever happen to anyone are have someone heard of the sensor brewing and the car suspension going DNS thanks for any help

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Mercedes-Benz Expert
  • 92 Answers

That is why your suspension went down. is that just a bracket or the arm off of the level sensor? it will need to be repaired for the car to maintain correct level.

Posted on Dec 02, 2014

  • Tom hale Dec 02, 2014

    Thank you it was very helpful sensor broke the brackets ok

  • Tom hale Dec 09, 2014

    Thank u for your help today after waitin a long time for the part it finally went up good job

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The air suspension on our 2000 Lincoln navigator seems not to be working right how can we find out what is causing this can we still drive it with this going on?


Ford Air Ride Rear Suspension Down Diagnosis & Fix ...

? 9:57
https://www.youtube.com/watch?v=wfh7n17hvN8
Feb 24, 2014 - Uploaded by FordTechMakuloco
Ford Air Ride Rear Suspension Down Diagnosis & Fix ... why theair ride compressor is not turning on and pumping up the air ridesuspension on your truck. ... Ford Expedition & Lincoln Navigator Air Ride C1725 Common Faults ... 2000 Ford Expedition - Replacing the rear shocks with load leveling shocks ...

2003 Lincoln Navigator air suspension fix(3) - YouTube

? 3:41
https://www.youtube.com/watch?v=MhWlcYycny4

Dec 25, 2015 | Lincoln Cars & Trucks

1 Answer

What is a clunk in rear end after driving 20 minutes?


These models generally have an air suspension set up in the rear. It is very possible to have a worn shock assembly and require replacement. Have the suspension inspected by a trusted shop who knows Mercedes in your area. Beautiful cars! Let me know what they say if you have doubt about their integrity or ability.

Oct 28, 2010 | 2000 Mercedes-Benz S-Class

3 Answers

MY CAR IS RIDING LIKE A LOW RIDER I HEARD A LOUD GASP OF AIR AND THEN THE BACK DROPPED AND I CANT REALLY DRIVE IT NOW , I HERE THE COMPRESSOR WORKING LOUDLY AS ALWAYS BUT ITS NOT LIFTING THE REAR 2000 4WD...


If your not too familiar with air-suspension, send it in. But I can tell you that the air-compressor will not last too much longer if it runs constantly.
You need to go underneath and find out where the air is coming from while the compressor is running. It is possibly coming from a defective proportioning valve, bad air-line or defective air-bag.

May 18, 2010 | 2000 Lincoln Navigator

1 Answer

I just purchased a 1997 lincoln continental and the rear suspension deflates at night but when it is started in the morning,it reflates. Is this normal?


it should deflates only at trim height and shld stay at that level considering that there is no leak on the rear air suspension. Most probably leaking rear air suspension is the problem. The system works up to 45 minutes only after ignition off and will maintain the trim height

Feb 09, 2010 | 1997 Lincoln Continental

1 Answer

The rear suspension is down on my 1999 Ford Expedition - Eddie Bauer. The cause: while out in the woods I came across a small dip which cause my back left wheel to lift off the ground. The suspension...


I had a 1999 Expedition. When you put the 4x4 on it raises the vehicle an extra inch or 2.
It may help to turn the 4x4 off. Two wheel drive is a lower air setting.
Your original pump may still be good. The problem can be in the front. The compressor is not filling the front suspension to the cutoff point. It will lift the rear after the front end is at running height. Since you lost the front end first, the remaining air bled out there and then the rear came down. Once you shut down the car the suspension was done, all the air was let go.
There are adjustment solenoids on the body but you need someone qualified to repair this.

Sep 05, 2009 | 1999 Ford Expedition

1 Answer

Suspension problems on my 2000 Mercedes


check fuse and relay.to air compressor to air shocks.also height sensor could be bad.

Jul 06, 2009 | 1996 Mercedes-Benz C-Class

2 Answers

Airride suspension won't deflate only inflate


It will only process a "down command" if it thinks all the doors are closed. If you have a bad door switch, it won't lower. Any courtesy lights on with doors closed?
The dealer can conduct a diagnostic scan test and retrieve any codes that will help identify the bad circuit. Did they do that?

Do you have 4 wheel air suspension or just rear?

Assuming rear only:
The system consists of unique rear air springs, the air compressor, air lines, air spring solenoids, height sensor, air suspension control module, attachments and associated signals derived from both driver and road inputs. With these components and signals, the air suspension control module commands changes in vehicle height that are necessary for the load leveling features.
The load leveling feature rear air suspension (RAS) systems shall automatically make adjustments in vehicle height so that the vehicle is always at trim height and constant front-to-rear vehicle attitudes are maintained over the expected load range of the vehicle. Adjustments in height that are necessary to correct height differences between the vehicle's left and right sides for the RAS system shall be restricted to what can be reliably achieved with one air suspension height sensor.
The system uses one air suspension height sensor, a steering sensor, generic electronic module (GEM) and other vehicle sensors to measure driver and road inputs. The system changes vehicle height using an air compressor, two air lines and the use of air springs with air spring solenoids.

Note this section.
The air suspension system holds vehicle height when the rear hatch or any door is opened. The system stores rear vehicle height the moment any open door is detected. The system then maintains this height regardless of the addition or removal of a load. The system will return to its commanded height when all doors are closed or the vehicle speed exceeds 16 km/h (10 mph).

Air Suspension Switch
The air suspension switch supplies power to the air suspension control module. Without the air suspension control module receiving this power, the load leveling system is inoperative and will not react when the rear of the vehicle is raised or lowered. If the air suspension system is disabled by turning off the air suspension switch, a "CHECK SUSP" will appear in the RH corner of the instrument cluster with the ignition in the run position.
--------------------------------------------------------------------
The vent solenoid:
  • allows air to escape from the system during venting actions.
  • is part of the air compressor cylinder head.
  • has a 1,103 kPa (160 psi) internal relief valve.
  • shares a common electrical connector with the air compressor motor.
  • is enclosed in the cylinder head casting, which forms an integral valve housing that allows the valve tip to enter the pressurized side of the system.
  • has an O-ring seal that prevents air leakage past the valve tip.
  • opens when the air suspension control module determines lowering is required.
  • provides an escape route for pressurized air that opens when system pressures exceed safe operating levels.
  • is replaced with the air compressor as a unit.
---------------------------------------------------------------
Air Suspension Height Sensor
One air suspension height sensor is mounted on the vehicle. The air suspension height sensor sends a voltage signal to the air suspension control module. The output ranges from approximately 4.75 volts at minimum height (when the vehicle is low or in full jounce), to 0.25 volts at maximum height (when the vehicle is high or in full rebound). The air suspension height sensor has a useable range of 80 mm (3.2 in) compared to total suspension travel of 200-250 mm (8 to 10 in) at the wheel. Therefore, the air suspension height sensor is mounted to the suspension at a point where full rear suspension travel at the wheel is relative to 80 mm (3.2 in) of travel at the air suspension height sensor. The air suspension height sensor is attached between the No. 5 frame crossmember (upper socket) and the panhard rod (lower socket).
When the air suspension height sensor indicates that the rear of the vehicle is lower than trim under normal driving conditions, the air compressor will turn on and pump compressed air to the air springs. When the sensor indicates that the rear of the vehicle is raised above trim under normal driving conditions, this will cause the air to be vented from the air springs to lower the vehicle back to its trim height level.
Compressor Relay
The compressor relay is energized by the air suspension control module to allow high current to flow from the battery to the compressor motor.
  • A solid state relay is used in the air suspension system for air compressor control. The relay incorporates a custom power metal oxide semi-conductor field effect transistor (MOSFET) and ceramic hybrid circuitry. The relay switches high current loads in response to low power signals and is controlled by the logic of the air suspension control module.
Air Suspension Control Module
NOTE: The 4WAS air suspension control module is used for the RAS system. The internal processor recognizes external circuitry to determine if it is installed in a 4WAS or a RAS equipped vehicle.
NOTE: The air suspension control module is calibrated with information from the air suspension height sensor. A new or exchanged air suspension control module requires a ride height adjustment calibration process to be performed.
The air suspension control module controls the air compressor motor (through a solid state relay), and the air spring solenoids. The air suspension control module also provides power to the air suspension height sensor. The air suspension control module controls vehicle height adjustments by monitoring the air suspension height sensor, vehicle speed, a steering sensor, acceleration input, the door ajar signal, transfer case signals, and the brake pedal position (BPP) switch. The air suspension control module also conducts all fail-safe and diagnostic strategies and contains self-test and communication software for testing the vehicle and related components.
The air suspension control module monitors and controls the air suspension system through a 32-pin two-way connector. The air suspension control module is keyed so that the air suspension control module cannot be plugged into an incorrect harness. There are two sides of the harness connection to the air suspension control module. Each is uniquely colored and keyed to prevent reversing the connections.
---------------------------------------------------
May be a bad module too.

Apr 11, 2009 | 2000 Lincoln Navigator

2 Answers

I have a 97 MKVIII with a mal-functioning  air suspension system. Parked on level ground the front end suspension depresses overnite. and upon starting it comes back up in the morning. It sometimes will...


leaks can be difficult to find in these systems. They could be in the air springs themselves, the air lines etc... not to mention you could have a ride height sensor that is malfunctioning or the control module. A lot of people are converting these old cars from the air ride suspension system to a standard passive coil spring conversion. A high quality, powder coated, American steel coil spring is DESIGNED to last the LIFETIME of the vehicle. http://www.strutmasters.com offers conversion kits with a lifetime warranty so youwon't have to worry about your suspension again. Give them a shot.. it definately beats the dealer price of around $1200 to fix your air ride.

Dec 02, 2008 | 1999 Lincoln Continental

1 Answer

AIRMATIC SUSPENTION ON S 430 L


wat is ur car actually problem?
one of the suspension down?
or warning light?

Oct 06, 2008 | 2000 Mercedes-Benz S-Class

Not finding what you are looking for?
2000 Mercedes-Benz S-Class Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...