Question about Cars & Trucks

1 Answer

I have a 93 D150 with a 5.2 and big 5 speed trans.The 5.2 is bad I have a 5.9 out of a 97 that had a automatic.What do I need to do to swap engines. Will I need to do something the flywheel or will it work the way it is?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,585 Answers

5.2 and 5.9 aren't compatible. Especially with the year difference. Even if you have the transmission for the 5.9, the ECM won't run the engine or transmission. Then you also have to rewire the truck..Plugs don't match..

Posted on Nov 30, 2014

  • Jeremy Nov 30, 2014

    All the elec tronics from the 318 and intake will enter change to the 360 the problem I am having is the balance issue. The 318 is internally balanced and the 360 is external

  • Randy Ohler Nov 30, 2014

    Then it won't work. The balance issue is both external. One is at the crankshaft front/ harmonic balancer. The other is balanced on the torque converter..Only 4 cylinders are balanced on the inside of the engine. Dodges, got to love them. innovative they are. just sucks, because they change up things so much.

×

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

sheiden9
  • 87 Answers

SOURCE: check engine light

yes and itys a very common problem yu need to change the speed sensor (VSS) on the trans heres how it comes apart 4359d1c.gif

Posted on Apr 04, 2009

rcampsr
  • 90 Answers

SOURCE: what engine will swap with 93 b2200 5-speed, not

Your best bet would be to go to an auto dismantler. They have an interchange book that will tell you what engine may be interchangable with yours. There is also a company that sells used engine longblocks from Japan that are low miles that let you pur parts on it and go. Unfortunately I can't remember their name or if they are even in business still. They are usually around 35 to 40 thousand mile motors because Japan requires vehicles to meet certain standards or the engine gets replaced. As an example in my 78 Honda Civic 3 door the 1200cc 4sp assembly was replaced with a 82 Honda Accord 1800cc 5sp assembly and it putts right down the road with better than 40+mpg on the open road. The auto wrecker can tell you what will be able to fit or not and for what years. Some of them will say engines will not fit because the smog is different, buy it also. Complete engine assemblies work the best, smog and all, you just need the correct engine mount placement and trans mount bolt pattern to be the same, the rest is just routing the plumbing and electrical. Good luck, RAC

Posted on Apr 14, 2009

  • 24 Answers

SOURCE: want to do a 5 speed trans swap

http://www.dsmtuners.com/forums/420a-drivetrain-tech/230980-mt-swap-info.html That's a great forum to start looking at. Honestly, a lot of people will tell you it's not worth the money, but everyone is entitled to their own opinions. It's ultimately up to you, after you've done the necessary research, to decide if it's worth it. Good Luck either way.

Posted on Apr 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Old geo will work with overdrive trans


"will I be", no one can speak for your skills, time or cash, why ask that.
ask how, how much, or how long.(so will answer that)
the prizm has , Toyota engine.
lets answer easY way;
1: you can in fact put any engine and any trans in to any car.
any true pro, can do that. it's not magic. (plasma cutter and all)
and a lot of hard work.
i many cases, in usa it's illegal ,but we skip that.

you did not state the exact transmission, you wanted.
out of what car, or what year.
ever price them $$$ ?
they run more that the whole car , like $1000?
and finding a uses good 5sp,. that be hard, after 18 years.

here are the parts (wiki paste) see toy engine?
Body style 4-door sedan
5-door hatchback Engine 1.6 L 4A-FE I4
1.6 L 4A-GE I4, 105 hp (78 kW)
1.6 L 4A-GE I4, 130 hp (97 kW) Transmission 5-speed manual
3-speed automatic
4-speed automatic
Ok, ill not post the 20 things that need to be changed
what I will do is teach you to fish,
I present the FSM. (better is a GEO parts list used)
the answer is here.
(tranny, tranny TCM brain, harnesses, mounts.
you can see in the FSM.

if you have never done , tranny swaps cars?,
why do that? you have a month of free time?
why not sell this old car, and get one with the 5sp.
http://www.scantool.net/software/alldata-diy-1-month-subscription.html
be cheaper, faster and will save vast effort and time.
$1000 to $1500 for old and get the 5sp car for same.
KBB prices.

Aug 11, 2013 | 1995 Geo Prizm

2 Answers

1997 silverado installed used trans n speed senser plug is diferent and now it wont down shift


If you have adifferent plug for the speed sensor then you probaly have the wrong year model transmission.Even though 93 through 97 look similar they do not interchange.Your speed sensor should be on the passenger side of tail housing,That is the 1995 up design.If you have a trans with the speed sensor on the drivers side of tail housing then you have a 93 to 94 design.93 and 94 were non-pwm units with 5 solenoids.95 was a pwm unit with 6 solenoids with low impediance pwm solenoid.96 and up are pwm units with 6 solenoids and high impediance pwm solenoid.Swapping these units can blow computers.It is probaly stuck in third gear because the fuse is blown or because of open vss circuit.You will not be able to make this transmission work.

Feb 14, 2011 | 1997 Chevrolet K1500

2 Answers

Installing an automatic transmission into a front wheel drive


Put it on a lift,support the engine from up top or under it, if you don't plan on using the lift for another job. Pull the axles. Then drop one side of the engine/suspension cradle,then the trans.

Mar 19, 2010 | 1992 Oldsmobile Cutlass Ciera

1 Answer

97 f-250 7.3 diesel transmission 4x4 swap to a 93 f-250 7.3 4x4??


in most cases yes as long as the bolt patterns are the same same engine there maybe some sensor issues but they can be eather removed if the trans doesn't have them or jumped out

Mar 03, 2010 | Ford F-250 Cars & Trucks

2 Answers

GRAND AM 97 VSS LOCATION


The vss is mounted on the rt axle shaft housing at the top of the housing on an automatic and man trans.

Feb 24, 2010 | 1997 Pontiac Grand Am

1 Answer

Would i be able toi swap my 93 4L60E for a manual transmission?


Yes it is possible to swap the auto trans to a manual trans but it will be a big job.
You will need the manual trans and shifter, flywheel, clutch and pressure plate, manual trans ECM and possibly wiring loom, pedal assembly, clutch master & slave cylinder and a whole lot more little bits.
The best way to do it would be to have a complete manual trans vehicle there to strip all the needed parts out of.

Nov 29, 2009 | 1993 Chevrolet Suburban

3 Answers

97 Nissan Pickup transmission swap for 95 or 96 transmission?


yes this will fit, model years 88-97 will fit. I would recommend the newest model you can get, as they improved internal hardware after 93. hopefully this helps

Aug 15, 2009 | 1997 Nissan Pickup

2 Answers

99 Honda Accord and Prelude Transmissions Interchangeability


the trans will actually bolt up to the engine..but it will not work properly without the pressure switch plugged in to the harness... if u notice, there is a hole with no threads in the prelude trans..u couldnt even thread a 3rd gear pressure switch in the trans case..trust me ive seen it b4 at the dealer where i work.. i even went as far as installing the trans and when going back together, saw the difference when trying to plug the harness in...its not the same..i laugh about it now, but was very mad at myself at the time for assumeing the parts guy brought me the right part..the guy with the prelude was about to install my accord  trans in his prelude ...luckily i was able to stop him b4 he installed my trans in his prelude...i laugh about it now

Apr 21, 2009 | 1999 Honda Accord

2 Answers

Check engine light


yes and itys a very common problem yu need to change the speed sensor (VSS) on the trans heres how it comes apart 4359d1c.gif

Feb 21, 2009 | 1997 Acura CL

1 Answer

Engine swap


SWAPPING ENGINE AND TRANNY? the auto to 5 spd will be a pain would really need a donot truck to get all the clutch linkage driveshaft and all that plus the ecm is gonna think truck is automatic

Nov 17, 2008 | 1996 Nissan Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...