Question about 2005 Subaru Legacy

1 Answer

How do I fix this problem?

When shifting the automatic transmission from R to D, the cruise & engine emission warning start blinking & accelerator stop responding. Sometime during driWhat is the reason for this?ving this also happen.

Posted by on

  • Hosam Mostafa
    Hosam Mostafa Nov 30, 2014

    When shifting the automatic transmission from R to D, the cruise & engine emission warning start blinking & accelerator stop responding. Sometime this happen during driving.What is the reason for this?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 112 Answers

Stop driving immediately that should fix your problem , don't shift an auto age a manual if you wish to change gears.

Posted on Nov 30, 2014

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Rebgagnon
  • 382 Answers

SOURCE: automatic transmission has recently started

Might help to change fluid and filter. The fluid may have buildup in valve body which is causing the hard shifting. That is the best place to start. Good luck and have a great day.

Posted on Oct 09, 2009

Testimonial: "Thanks. Good advice. Haven't had car long. Don't know if or when trans. ever serviced."

nobody322
  • 20706 Answers

SOURCE: Why does manual transmission no longer shift, and is making air leak noise?

i bet it does shift in to gear, if you start engine in 1st or REV.gear.right.
if you start engine in gear, with clutch depressed, and the car moves
that means clutch failure.
it can be a bad clutch linkage, easy fix.
there are 2 systems. (3 on relics) cable and a hydraulic acuator.

i can never tell what others can do, some cant tie shoe laces others fly to moon..
im laces.
im too lazy no wto look up the linkage on yours.
why not just look.
see clutch master cylinder above pedal on fire wall?
that is hyd. if missing and is cable ? bingo cable system.

cable play never set ever? do so now, called free play.
if cable end moves 1inch its good.
if the slave cylinder dont move it or or the MC is bad. replace both,
both are easy fixed, ask.
.

Posted on Jun 05, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHY DOES MY 2003 JEEP WRANGLER 4.2 ENGINE AUTOMATIC TRANSMISSION CUT OUT RIGHT BEFORE IT SHIFTS GEARS


cut?
what does it do.
flare or slip
fail to up or down shift correct
shift to wrong gear say 2 to 4, or 2 to 1.?
are you just cruising when this happens
or only accelerating.
or?
did you scan to the PCM for DTC errors yet?
check fluid levels.
is engine overheating,?

Jul 05, 2016 | 2003 Jeep Wrangler

1 Answer

Why is the sport mode light flashing on my 2000 Cadillac Catera?


Sport Mode Indicator Lamp and Automatic Transmission Warning Lamp (STL)
The sport mode indicator lamp illuminates when the vehicle has been put into the sport mode by pressing the "S" button on the gear selector. When this lamp is illuminated the vehicle will have slightly firmer shifts and increased performance for part and full throttle situations.
This lamp will also flash when there may be a problem with the automatic transmission. The transmission control module (TCM) performs a continual self diagnosis of certain control functions. The lamp will flash only when an error is detected. The TCM will store in memory a current and/or history trouble code when a problem is detected. I'd have it checked out !

Dec 30, 2014 | 2000 Cadillac Catera

1 Answer

Check engine light blinks


The reason for hesitation of vehicle when accelerating is due to lack of transmission fluid. Check your ride for any leaks and repair them. Filling the transmission tank with fresh fluid after repairing may solve the problem.

Jun 18, 2013 | 2001 Toyota 4Runner

1 Answer

How to find codes for check engine light on


Check Engine Light Codes and Meanings
Long blinks Short blinks Problem
1 1 Camshaft position sensor
1 2 Mass air flow sensor
1 3 Engine coolant temperature sensor
1 4 Speed sensor
1 11 EVAP control system (flow)
1 14 Fuel injection system right bank (too rich)
1 15 Fuel injection system right bank (too lean)
2 1 Ignition circuit
2 3 Closed throttle position switch
2 5 Idle speed control
2 9 Fuel Injection system left bank (too rich)
2 10 Fuel Injection system left bank (too lean)
3 1 ECU
3 2 Exhaust gas recirculation system flow problem
3 3 Front left O2 sensor
3 4 Knock sensor
3 5 Exhaust gas recirculation temperature sensor
3 6 EGRC-BPT valve
3 7 Closed loop control
3 8 Closed loop control
4 1 Air intake temperature sensor
4 2 Fuel tank temperature sensor
4 3 Throttle position sensor
4 7 Crankshaft position sensor
5 3 Front right O2 sensor
5 4 Automatic transmission control unit
6 3 Cylinder #6 misfire
6 4 Cylinder #5 misfire
6 5 Cylinder #4 misfire
6 6 Cylinder #3 misfire
6 7 Cylinder #2 misfire
6 8 Cylinder #1 misfire
7 1 Multiple cylinder misfire
7 2 Three way catalytic converter (right side)
7 3 Three way catalytic converter (left side)
7 4 Evaporative emission control system pressure sensor
7 5 Evaporative emission control system
7 7 Rear O2 sensor
8 1 Vacuum cut valve bypass valve
8 2 Crank position sensor
8 3 Absolute pressure sensor
8 4 Automatic transmission control unit
8 6 Evaporative emission canister purge control solenoid valve
8 7 Evaporative emission Canister purge control solenoid valve circuit
9 1 Front Right O2 sensor
9 3 Evaporative emission Canister vent control valve
9 5 Crankshaft position sensor
9 8 Engine coolant temperature sensor
10 1 Front left O2 sensor
10 3 Park and Neutral position switch
10 5 EGRC solenoid valve
10 8 Evaporative emission canister purge volume control valve
11 1 Inhibitor switch
11 2 Revolution sensor
11 3 Improper shifting to first gear (Automatic transmission)
11 4 Improper shifting to second gear (Automatic transmission)
11 5 Improper shifting to third gear (Automatic transmission)
11 6 Improper shifting to fourth gear (Automatic transmission)
11 7 Solenoid valve lock up function
12 1 Shift solenoid B (Automatic transmission)
12 3 Overrun clutch solenoid valve (Automatic transmission)
12 4 Torque converter clutch solenoid valve (Automatic transmission)
12 5 Line pressure solenoid valve (Automatic transmission)
12 6 Throttle position sensor (Automatic transmission)
12 7 Engine speed signal
12 8 Fluid temperature sensor
13 2 MAP/BARO Switch Solenoid Valve
13 5 Fuel pump control module
13 8 Cooling fan

Dec 12, 2011 | 1995 Nissan Maxima

1 Answer

The Drive light flashes and the car loses power and sometimes won't start.


It is either your Vehicle Speed Sensor (easy to change) or your Automatic Transmission Computer (capacitors burn out on these boards, there is a fix for this too, the picture is at the bottom of this page). You need to diagnose by removing the lower right plastic kick panel on the passenger side. There you will find a blue plug. With the car OFF stick a paper clip, wire or stuff the plug with foil to make electrical connection so that the two terminals are touching. Then, turn the ignition to ON (not enough to start it though, just power it up). When you do this, count the blinks in the "D Light" or count your blinking Check Engine Light. Both are different but can refer to different things wrong with your car. A long blink is the first number and the short blinks that follow are the second number.
So imagine this as being 14 : ___ _ _ _ _

Below is a decoding chart:

The first section will be the check engine light codes, the next one is the Transmission Control Unit Codes read from the D Light;

1 O2A - Oxygen sensor #1
2 O2B - Oxygen sensor #2
3 MAP - manifold absolute pressure sensor
4 CKP - crank position sensor
5 MAP - manifold absolute pressure sensor
6 ECT - water temperature sensor
7 TPS - throttle position sensor
8 TDC - top dead centre sensor
9 CYP - cylinder sensor
10 IAT - intake air temperature sensor
12 EGR - exhaust gas recirculation lift valve
13 BARO - atmospheric pressure sensor
14 IAC (EACV) - idle air control valve
15 Ignition output signal
16 Fuel injectors
17 VSS - speed sensor
19 Automatic transmission lockup control valve
20 Electrical load detector
21 VTEC spool solenoid valve
22 VTEC pressure valve
23 Knock sensor
30 Automatic transmission A signal
31 Automatic transmission B signal
36 traction control found on JDM ecu's
41 Primary oxygen sensor heater
43 Fuel supply system
45 Fuel system too rich or lean
48 LAF - lean air fuel sensor
54 CKF - crank fluctuation sensor
58 TDC sensor #2
61 Primary oxygen sensor
63 Secondary oxygen sensor
65 Secondary oxygen sensor heater
71 random misfire cylinder 1
72 random misfire cylinder 2
73 random misfire cylinder 3
74 random misfire cylinder 4
80 Exhaust Gas Recirculation insufficient flow detected
86 ECT Sensor (Engine Coolant Temperature) circuit range / performance problem
90 Evaporative Emission Control System leak detected in the fuel tank area
91 Fuel Tank Pressure Sensor low input
92 Evaporative Emission Control System insufficient purge flow

TCU Codes:

CODE LIST:

1-Lock-up solenoid 'A' circuit open or shorted.
2-Lock-up solenoid 'B' circuit open or shorted.
3-Throttle Position Sensor circuit open or shorted.
4-Vehicle Speed Sensor open or shorted - No signal from speedometer.
5-Shift Lever Position Switch circuit shorted.
6-Shift Lever Position Switch circuit open.
7-Shift Solenoid 'A' circuit open or shorted.
8-Shift Solenoid 'B' circuit open or shorted.
9-Counter shaft or transmission speed pulse generator open or shorted.
10-Coolant Temperature Sensor open or shorted.
11-Engine RPM (Ignition coil signal) open or shorted.
12-(No code 12 used)
13-Main shaft speed pulse generator open or shorted.
14-Linear (line pressure control) solenoid open or shorted.
15-Kick down switch circuit shorted.

bf68ebb.jpg

Feb 14, 2010 | 1992 Honda Accord

2 Answers

2002 Toyota Celica with a strange shifting problem.


I had the same problem, replacing you thermostat should do the trick, i spent 8.99 on a new thermostat and 99 cents on a seal. For some reason engine temperature affects the transmission shifting. Good luck

May 31, 2009 | 2002 Toyota Celica

1 Answer

2002 Toyota Celica with a strange shifting problem.


Automatic transmission are complex systems. The shifting of gears is based on a number of things like bands, speed, acceleration, deceleration, manifold back pressure, RPMs, temperature, etc.
Sometimes the electrical ground connection for the transmission can become corroded which causes poor shifting.
Since you are getting an error code, you should get a readout for it. Many auto supply store like Advance Auto will loan a meter for you to get a readout. Call up some stores to find one.

Mar 18, 2009 | 2002 Toyota Celica

1 Answer

Loosing power at cruising speed


have you had the transmission flushed? it seems to be caught in a limbo. where the calibration of the speedo and the transmission are not compatable. Now as wierd as that seems it happens usally like when going up a hill if you have a manual trans. and cruise locked in. it cant hold that speed and moves to a different speed if you dont down shift. Or perhaps your cruise control cable is slipping. is it vacume over mechanical? pop the hood and make sure all your hoses to cruise control are tight and no leaks.

Feb 12, 2009 | 1998 Mercedes-Benz C-Class

1 Answer

Hard shift and blinking overdrive


The blinking overdrive button is telling u that a serious fault has occurred in the electronic controls or a mechanical fault such as excess slippage is occurring.

Jul 16, 2008 | 2000 Ford Ranger SuperCab

Not finding what you are looking for?
2005 Subaru Legacy Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...