Question about Cars & Trucks

1 Answer

How do i remove the hoses from my gas filler neck

I'm trying to remove the hoses from my gas filler neck on my 2005 Dodge Durango reason why I want to remove the hose is so I can replace the gas filler neck

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cars & Trucks Master
  • 352 Answers

I do not have experience with a Durango. I have experience with a Chevrolet. The hose on the filler line was large diameter and very hard. It would not slip off. I had to empty the gas tank, cut the large hose, and remove the small hose. Then I had to jack up the car, and lower the gas tank to the ground to have room to work. From there is was simple to remove and install parts, install the gas tank, and tank up.

Posted on Nov 30, 2014

  • Nick Ours Nov 30, 2014

    Thanks anyways I found out how to remove the filler neck it wasn't too hard

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge grand caravan 2005 filler neck replacement


1)Block front wheels.
2)Jack up the left rear tire off of the ground.
3)Put blocks up under the frame.
4)Take off the left rear tire.
5)Take out the plastic liner in the fender well that covers the fuel filler neck.
6)Loosen up the hose clamps on the rubber fuel filler hoses. (at the neck side); once the clamps are off plan on buying new ones. This next part of the job is VERY IMPORTANT! use a flat screwdriver and pry 360 degrees all around the rubber filler neck hoses. (they get kinda glued on from being on there so long). Next Get some PB Blaster lube or WD-40 (it has to have the small red squirt hose) and spray the lube up in between the hoses while you pry around. the more you do this the easyer it will be to pull the metal filler neck pipe out.
7)Now its time to take out the 4 bolts that hold the pipe on.
Use a 10mm socket and extension to take out 4 bolts up top behind the fuel filler door.
8)Pull the filler neck out and put everything back together the way it came apart and your done!

Aug 26, 2016 | 2005 Dodge Grand Caravan

1 Answer

What is the part you putgas into which flows to the fuel tank


It's called the filler neck and hose. The hose clamps onto the filler neck and to the opening in the tank.

Jul 16, 2013 | 2004 Dodge Durango

1 Answer

How to remove the fuel filler neck on my 1999 Dodge Grand Caravan 3.8 ltr. engine


OPEN GAS CAP FLAP THEN YOU NEED TO DRAIN GAS BELOW FILLER NECK.THEN LOOSEN REMOVE SCREWS IN THE GAS CAP FLAP AREA WHERE FILLER TUBE CONNECTS THEN GO UNDERNEATH VAN LOOSEN REMOVE HOSE CLAMPS AND REMOVE THE HOSE AT THE FILLER NECK BELOW THE GAS TANK.SPRAY WD40 AROUND HOSE AREA AT METAL FILLER TUBE STICK OUT GAS TANK.CAREFULLY USE LARGE PAIR OF CHANNEL LOCK PLIERS TO REMOVE WORK HOSE OFF METAL TUBE FROM GAS TANK. IF YOU CANT REMOVE HOSE WITH HANDS.BECAREFUL NOT TO MAKE ANY SPARKS.PLACE RAGS AROUND ANY METAL PARTS TO KEEP CHANNEL LOCKS FROM HITTING METAL MAKING SPARKS.

Jun 23, 2011 | 1999 Dodge Grand Caravan

1 Answer

Dodge dakota 2005 -check engine light(gas cap)gas cap was replaced.Fuel spills out when filling tank.Fuel lines were smoked and no clog was found.


There is a check valve in the filler hose to stop fuel from coming out seems yours might be stuck , run a metal coat hangers inside the filler neck while prying open the little fill flap. see if that helps OR you are not or have no VENT to AIR in your evap system causing excessive tank pressure.

Aug 28, 2010 | 2005 Dodge Dakota

2 Answers

Gas takes forever to drain into filler tube when gassing up at the pump


check to see if theres any objects in the filler tube. If you have small children they can find a million things to do to that van

Feb 03, 2010 | 2005 Dodge Caravan

1 Answer

Gas filler neck replacement


open the fuel cover and remove the bolts.Remove the ground strap from the filler tube from under the car.Remove the hose clamps to the rubber hose going into the tank and pull off the hose.Now the filler tube will come out[ if has'nt already fallen out and hit you in the head].

Nov 18, 2009 | 1997 Oldsmobile Cutlass Supreme

1 Answer

REPLACE A COOLANT FILLER NECK IN A 2000 DODGE DURANGO


have to go to radiator shop to even find a filler neck, then you would have to soilder it on the radiator. save your self a lot of trouble and headaches, just repalce the radiator, good luck.

Oct 23, 2009 | 2000 Dodge Durango

1 Answer

HOW DO I REPLACE THE FILLER NECK HOSE ON A 1994 FORD RANGER XL?


open gas door - remove bolts holding gas cap filler neck plastic to bed - behind the bedside bend down this filler neck take loose hose clamp on top side of hose

Sep 30, 2009 | 1994 Ford Ranger Supercab

3 Answers

Radiator


the upper rad hose goes from the rad to the thermostate housing. this hose is @2-21/2" the lower hose same size goes from lower rad to water pump. There is a 5/8 hose from water pump to thermostate housing called bypass hose. and you have two hoses from water pump and intake to the heater core. hope this helps if not let me know thanks

Jan 18, 2009 | 2000 Dodge Durango

2 Answers

2005 DURANGO GUSHING GAS TANK


There was a recall on this type of problem a while back. I had the same issue and brought it to Dodge to get fixed. You should have received something in the mail but if you didn't here is the information.
Make: DODGE Model: DURANGO Model Year: 2005 Manufacturer: DAIMLERCHRYSLER CORPORATION Mfr's Report Date: FEB 01, 2005 NHTSA CAMPAIGN ID Number: 05V034000 N/A NHTSA Action Number: N/A Component: FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP Potential Number of Units Affected: 26000 Summary:
spacer.gif ON CERTAIN SPORT UTILITY VEHICLES, THE FUEL TANK FILLER TUBE INLET CHECK VALVE MAY NOT FULLY CLOSE AT THE END OF REFUELING. THIS COULD ALLOW SOME FUEL TO ESCAPE FROM THE VEHICLE FILLER NECK. Consequence:
spacer.gif FUEL LEAKAGE IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE. Remedy:
spacer.gif DEALERS WILL INSPECT THE INLET CHECK VALVES AND REPLACE THE FUEL TANK ASSEMBLY FREE OF CHARGE. THE RECALL BEGAN ON APRIL 4, 2005. OWNERS MAY CONTACT DAIMLERCHRYSLER AT 1-800-853-1403. Notes:
spacer.gif DAIMLERCHRYSLER RECALL NO. E01. CUSTOMERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV.

Oct 11, 2008 | 2005 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...