Question about Mazda Tribute

Open Question

Can any one help me on how to install a universal dickie seat to a Mazda tribute ?

Are there any anchor points in a Mazda tribute for fitting a 3row seat.

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: how to install baby seat in 1988 mazda 121 hatch

On the back parcel shelf there should be threaded bolt holes. They may be covered with a plastic plug. If you dont have any just get the child seat mount from the shop or you should get one with the seat. Drill i a hole , put the bolt through then on the under side put the washer and nut on . It all should be supplied with the bolt and clip.

Posted on Aug 05, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is orifice tube on 2003 Mazda tribute


It is in the high pressure line going to the evaporator like everyone said. My Haynes manual made it look like it was at the connection right at the firewall but it is further upstream than that. There is a compression fitting upstream of the A/C tube fitting that you have to undo. Once you open that part you'll see the orifice tube. Hope this helps

May 27, 2014 | 2003 Mazda Tribute

1 Answer

Mazda how to


Does anyone know how to fit a universal dickieseat to a Mazda tribute ? Are there factory anchor points ?
Thanks angelo.

Jan 10, 2014 | Cars & Trucks

1 Answer

2001 mazda tribute v6 probumes


Is it the seat belt warning?

Jul 14, 2013 | 2001 Mazda Tribute

3 Answers

How to install baby seat in 1988 mazda 121 hatch


Most vehicles built before around 1995 were not equipped with baby seat anchors as standard equipment.
Baby seat anchors are also not something that is normally covered in service and repair information. You need to look in your Owner's Manual. If your Owner's manual does not show any baby seat anchors, then there are kits available at your local parts store or dealer to install some. There shouldn't be any need to "weld" anything.

Please also check out this link:

http://www.thecarseatlady.com/vehicles/the_latch_system_9.html

May 22, 2012 | Cars & Trucks

1 Answer

I need to know where to find the child anchor for a 1996 dodge caravan


There are no child anchors on a 96. This was around the time the latch system was under development. Just went through looking into this for my 1996 van. chico car seat fit well

The newer van seats will not fit either( I do have a 2007 seat for sale now ) as I tried to make one fit in my 1996 van with the latch system and it didnt fit. Wheels right spacing too wide for the anchor points.
Tom K. MN

Nov 11, 2011 | 1996 Dodge Caravan

1 Answer

Are there Anchors to install a carseat in my 95 mazda protege? Where are they?


mcdevito75 here, As far as I know regarding Baby seats for autos these so called anchors are built into the baby seat itself, refer to the owners manual for the baby seat to install.

Apr 11, 2010 | 1995 Mazda Protege

1 Answer

Driver's seat belt sticking - 2003 Mazda Protege


Not really, you just need to be carefull not to brake the plastic covers but you can get them separate than use a thin spanner and you should be able to do it without removing the seat.

Nov 15, 2009 | 2002 Mazda Protege

1 Answer

My 2005 mazda tribute brake lights will not turn off


The stop light switch is sticking. If it's a mechanical one that is operated by the movement of the brake pedal the replace the switch. If a hydraulic one is fitted, remove one wire and see if the stop lights go off. If so then replace the hydraulic switch.

May 22, 2009 | 2005 Mazda Tribute

1 Answer

Air bag light on and off on a 04 tribute


had the same prob on mine underneath the front seats are seat belt tensioner plugs 1 under driver and 1 under pass. seat unplug them and plug them back in , i found this solution on this site somewhere and it worked saved me a lot of money, almost took it to the dealer

Mar 15, 2009 | 2004 Mazda Tribute

1 Answer

I can't find a child restraint anchor point in my 1996 Mazda 121.


The rear seat child restraint anchors were not required (by law) until early 2000's. Most likely your car does not have them.

Jan 20, 2009 | 1993 Mazda 323

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...