Question about Cars & Trucks
No help here. Live in honduras. Need some answers so to tell local work shop.
My first guess is gas. How long has it been since you put gas in this van?
Posted on Nov 30, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi Wayne, what you do is turn the key to the "on" position and back to "off". Do this three times. The engine light will flash. It will flash a certain amount of times, pause, then another set of flashes. The first set of flashes is the first number of your code. The second set is the second number. For example, you see 5 flashes, your first number of your code is 5, and so on.
Posted on Jun 11, 2008
sounds like you have a dead ignition coil very common problem. to check the ignition coil and fuel injector harness without a scan tool you can use a noid light. it is a 12volt light bulb that connects to the harness side and flashes indicating that the computer is firing the injector and or coil. there is no specifications to check the ignition coils the best way is with a scan tool see witch cylinders have the most counts in the misfire history your local dealer may also be able to perform a cylinder balance test to find the dead hole. unfoutunatly you have to remove the doghouse to access the rear coils and fuel injectors.
Posted on Jul 14, 2009
check tps sensor (throttle position sensor in backside of the throttle cable) and map sensor (manifold absolute pressure on front little 1 inch sensor with vacuum line) make sure there plugged in. the ecm (engine control module driver side inner fender) and tcm (transmission control module under dash) both need the data to know when to upshift and increase fuel/air. Otherwise the computer runs default values and guesses off of other sensors giving poor performance. also disconnect battery for 15 min. usually resets aveo service lights if you dont have a scanner.
Posted on Aug 02, 2009
SOURCE: What does the code P0700 mean
this a gerneric code that gose from the transmition computer to the power control mod.
Any time the trans feel a hesitation it will send this code.
I have had two plymouth vans and around 130,000 miles i got hesitation in the speed and throttle.. both cases the throttle position sensor went bad. It will be abiut 45 dollars and it is in a place were any one can replace it.
Posted on Aug 12, 2009
Testimonial: "thanks where is this located exactly and is it something i can fix myself"
you should stop driven the vehicle and get it repaired, The engine light flashing mean the emission problem is doing damage to your convertors.
Posted on Sep 28, 2009
Tips for a great answer:
May 19, 2013 | Cars & Trucks
Nov 11, 2012 | 2005 Pontiac G6
Feb 23, 2012 | Cars & Trucks
Jan 18, 2012 | 2001 Chrysler Town & Country
Jan 07, 2011 | 2000 Audi A4
Jan 04, 2011 | 2000 Ford Escort
Nov 05, 2009 | 1996 Dodge Caravan
Sep 05, 2009 | 2006 Ford Taurus
Sep 22, 2017 | Dodge Cars & Trucks
44 people viewed this question
Usually answered in minutes!