Question about Cars & Trucks
Took 2 hours to replace alternator. Over 4 hours and no progress getting the belt back on. Can't find accurate diagrams anywhere on line that show this vehicle.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 28, 2015 | 1999 Oldsmobile Cutlass
Dec 03, 2015 | Nissan Cars & Trucks
Nov 30, 2014 | 2005 Chevrolet Express
Sep 26, 2011 | Cars & Trucks
Sep 13, 2011 | 2004 Ford Escape
Locate the two belts on the left side (passenger side) of your Mitsubishi Lancer. The outer belt is a serpentine belt, operating four pulleys and the inner belt is your alternator belt.
Follow the serpentine (outer) belt to the three pulleys lined up vertically near the front of the engine compartment. Locate the middle pulley, which is the tension pulley for the belt.
Loosen the bolt on the middle pulley with a socket wrench by turning counter-clockwise. Do not remove the bolt, just turn it a couple of times. Loosen the tensioner bolt on the side of the of the pulley, facing the front of the vehicle.
Remove the serpentine belt and then loosen the bolt on the alternator. With the alternator loose, move it forward so that the alternator belt loosens up and then remove belt from the pulleys.
Install the new alternator belt by placing it over both inside pulleys. Tighten the tension on the alternator belt by moving the alternator back and keeping tension on it by holding it back with a long screwdriver. While the alternator belt is tight, use a socket wrench to tighten up the bolt on the alternator.
Place the serpentine belt back on the pulleys and then use a socket wrench on the bolt on the front of the tension pulley. Once the serpentine belt is tight, tighten up the bolt in the middle of the tension pulley.
Start the Mitsubishi Lancer's engine to test the alternator belt and make sure it is working properly. Once you have verified it is working, turn the engine off.
Oct 08, 2010 | 2002 Mitsubishi Lancer
Jul 20, 2010 | 1995 Buick Skylark
Sep 25, 2009 | 2002 Ford Mustang
Dec 26, 2008 | 1999 Ford Windstar
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: