Question about Cars & Trucks

1 Answer

Remove head unit cover - Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 1,249 Answers

Crowbar strongarm lever.

Posted on Nov 30, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The 2009 volkswagen routan cd is stuck how to remove it and it says error on it also help please thank you God bless you


To remove it you must remove the head unit from the dash and then remove the chassis cover from the head unit and retrieve the CD

Mar 24, 2017 | 2009 Volkswagen Routan

1 Answer

How do i fix head gasket


The process is basically the same for any car or truck. Yours is an 8 cylinder engine, everything will have to be removed from the top of the engine and all wiring will have to be disconnected and moved to the side, You will have to remove the valve covers. If you have an overhead cam, in this car, you'll have to remove all the pulleys, water pump, AC unit and power steering unit from the front of the engine so you can then remove the timing cover. Remove the timing chain(s) and gear(s), you then can go after the head bolt removal.

If you do one head gasket, you may as well do the other one why you have the car tore down. If you have aluminum heads, you will most likely have to take the heads and have them milled (resurfaced) especially if you overheated the car when the head gasket blew.

For more detailed information, you really should buy yourself a repair manual so you can get torque specs on nuts and bolts and buy any specialty tools you may need to do the job.

Mar 25, 2015 | 1999 Lexus LX470

1 Answer

How do you Remove head unit 1990 holden barina


First drain water . remove cables from plugs and any thing attached to the head. Remove valve cover, remove valve rocker. remove manifold. undo head studs , undo from the center working one stud at a time from left to right of center. lift off head.

Aug 16, 2014 | Cars & Trucks

1 Answer

Need to remove valve cover on 2000 Camry Toyota


For the four cylinder engine:

  1. Remove and label all electrical wiring, connectors and vacuum hoses necessary to gain removal clearance.
  2. Remove the spark plug wires. Disconnect the PCV hose.
  3. Remove the four nuts and grommets located on top of the cylinder head cover.
  1. Remove the cylinder head cover and the cover gasket from the cylinder head.
  2. Discard the gasket and replace with a new one.
To install:
  1. With a wire brush or gasket scraper, remove all the old gasket material from the cylinder head and the cylinder head cover gasket surfaces.
  2. When the cylinder head surfaces are free and clean, apply beads of sealant to the cylinder head in the locations shown in the accompanying illustrations.
  3. Install the new cylinder head gasket in the cover. Make sure that the gasket seats evenly.
  4. Place the cylinder head cover with the gasket onto the cylinder head.
  5. Install the four grommets and nuts. Uniformly tighten the nuts in several passes to 17 ft. lbs. (23 Nm).
  6. Connect the PCV hose. Connect all removed vacuum hoses, connectors and electrical wiring. Connect the negative battery cable.
  7. Start the engine and inspect for oil leaks.
  8. Repair any leaks as necessary.
For the V-6 (3.0L) engine:
  1. Drain and recycle the engine coolant.
  2. Disconnect the radiator inlet hose.
  3. Disconnect the throttle and accelerator cables.
  4. Remove the air cleaner cap assembly.
  5. Remove the V-bank cover. Use a hexagon wrench to loosen the nuts.
  6. Label and remove all emission control valve hoses. Disconnect any wiring interfering with the valve cover removal.
  7. Remove the air intake chamber. This will gain you access to the back valve cover.
  8. Disconnect the engine wire from the left hand side, No. 3 timing belt cover, rear side and right hand side. Most of the wiring is secured by nuts and or bolts to the body of the vehicle.
  9. Remove the ignition coils, make sure the place them in order on a table so not to mix them up.
  10. Remove the 8 bolts retaining the valve covers and gasket.
  11. Clean the mating area of the valve cover and cylinder heads well. If necessary, scrape any left gasket from either surface.
  12. Apply seal packing to the cylinder heads and place new gaskets into position.
  13. Attach the valve covers. Uniformly tighten the bolts in several passes to 69 inch lbs. (8 Nm).
  14. Install the spark plugs in their proper locations, then place the ignition coils into place and secure.
  15. Attach all engine wiring be sure to secure each harness properly.
  16. Install the air intake chamber. Refer to Fuel System .
  17. Attach all emission hoses and wiring.
  18. Attach the V-bank cover.

Apr 15, 2014 | 2000 Toyota Camry

1 Answer

How do i replace the fuel level sensor on a 2005 kia sorento


What You'll Need:
  • flat head screwdriver
  • Phillips head screwdriver
  • hammer
  • open end wrenches
  • replacement fuel tank sending unit
    Before you begin, disconnect the negative battery cable to be sure no electrical sparks are possible. You're dealing with gas which is highly flammable!Your fuel tank sending unit is located in the top of the fuel tank, but is accessible under your back seat (or under the carpet in your trunk) on some models. The sending unit will be protected by an access cover, usually held on with a couple of screws. Lift your back seat or trunk carpet and locate the access cover for your fuel tank sending unit. Remove the screws holding the cover in place and remove the access cover to reveal the fuel tank sending unit.
    Safety Note: Gasoline is highly flammable. By removing the fuel tank sending unit, you are opening the gas tank. Be sure there are no sources of spark or flame nearby.
    With the access cover removed, you'll see the fuel tank sending unit right there on top. It will have a wiring harness plugged into the top (this tells your gas gauge how much fuel is in the tank). Unplug the wiring harness and move it safely to the side. If your fuel tank sending unit is screwed or bolted in place, remove the screws or bolts. Some sending units are a "twist-lock" type. They work like the old twist-lock gas caps. You'll see a few notches along the outer ring of the sending unit. Place the tip of a sturdy flat head screwdriver in the notch and gently tap it counter-clockwise. The sending unit will rotate until it's loose. (the picture above shows the fuel tank out of the car to illustrate the fuel tank sending unit's location). Now you can remove the fuel tank sending unit in one piece. Attached to it is a long rod with a float at the end, so you might have to try a couple of different angles to get it out. As usual, installation is the reverse of removal. Don't forget to plug the new sender in or it won't send you anything!

Jun 22, 2012 | 2005 Kia Sorento

1 Answer

Change head gasket on 65 mustang 200


Drain antifreeze -DON"T POUR IT DOWN A STORM DRAIN - then remove valve cover, Remove exhaust from head assembly. On this engine the head is also the intake manifold - it's cast as a unit. Remove carb and remove heater hoses from carb base plate. Remove head bolts and discard. Break head loose from block - may have to smack it a time or two to break gasket loose. Get a buddy to help lift the head off the block - it's fairly heavy. Clean gasket surfaces on both head and block. Install new gasket onto block - pay attention to gasket orientation - it goes on only one way correctly. Reverse procedure to re-install - USE NEW HEAD BOLTS! Silly to try to save $20 bucks on bolts and ruin an engine.

May 05, 2012 | 1966 Ford Mustang

2 Answers

Valve cover gasket, how to replace?


Rocker Arm (Valve) Cover REMOVAL & INSTALLATION 2.3L 4-Cylinder Engines
  1. Disconnect the negative battery cable.
  2. Label and remove the spark plug wires.
  3. Remove the attaching bolts for the valve cover.
  4. Remove the valve cover from the cylinder head. If necessary, lightly tap the valve cover with a soft hammer to aid in removal. To install:
  5. Thoroughly clean the valve cover and cylinder head gasket mating surfaces.
  6. Install the valve cover on the cylinder head using a new gasket.
  7. Tighten the valve cover bolts to 14 ft. lbs. (20 Nm) in a crisscross pattern.
  8. Install the spark plug wires.
  9. Connect the negative battery cable.
  10. Start the engine and check for leaks. Fig. 1: Valve cover and gasket assembly 90953g12.gif
2.8L 6-Cylinder Engine
  1. Disconnect the negative battery cable.
  2. The following steps are necessary if your car has A/C and if you are removing the passenger side valve cover, if you do not need to remove the passenger side valve cover, skip them.
    1. Remove the A/C compressor belt and the compressor from the mounting bracket located on the passenger side of the engine. Do not remove the lines from the compressor.
    2. Place the compressor with the lines attached on the passenger side front shock tower and secure.
    3. Remove the compressor bracket.
  3. Remove the air cleaner-to-throttle body hose.
  4. Label and remove all necessary electrical and vacuum connections.
  5. Remove the attaching bolts for the valve cover(s).
  6. Remove the valve cover(s) from the cylinder head(s). If necessary, lightly tap the valve cover with a soft hammer to aid in removal. To install:
  7. Thoroughly clean the valve cover(s) and cylinder head gasket mating surfaces.
  8. Install the valve cover(s) on the cylinder head(s) using new gaskets.
  9. Tighten the valve cover bolts to 11 ft. lbs. (15 Nm) in a crisscross pattern.
  10. Install all necessary electrical and vacuum connections.
  11. Install the air cleaner assembly.
  12. Install the A/C bracket (if removed).
  13. Install the A/C compressor and belt (if removed).
  14. Connect the negative battery cable.
  15. Start the engine and check for leaks.
2.3L and 2.4L 5-Cylinder, and 2.9L 6-Cylinder Engines The 2.3L and 2.4L 5-cylinder, and 2.9L 6-cylinder engines have a two-piece cylinder head, the upper half and the lower half. The upper half is basically the same as a valve cover, except that it incorporates the bearing caps for the camshafts into the underside.
  1. Disconnect the negative battery cable.
  2. Remove the spark plug access cover.
  3. Label and remove the ignition coils and vent hoses or the distributor cap and wires if equipped.
  4. Check the cam alignment before removing the cylinder head.
  5. Remove the bolts attaching the upper cylinder head.
  6. Remove the upper cylinder head, lightly tap with a soft hammer if necessary. To install:
  7. Thoroughly clean the upper and lower cylinder head gasket mating surfaces.
  8. Apply liquid sealing compound to the upper cylinder head mating surface. WARNING
    Use a roller or your finger to spread sealant, do not use an excessive amount of sealant, or the oil passages could become clogged.
  9. Place the upper cylinder head onto the lower cylinder head.
  10. Check the cam alignment before tightening the cylinder head.
  11. Install Volvo tool number 5454 or equivalent to the upper cylinder head.
  12. Tighten the nut on the tools to seat the upper cylinder head.
  13. Tighten the upper cylinder head bolts, beginning from the center out to 13 ft. lbs. (17 Nm).
  14. Install the ignition coils and hoses or the distributor cap and wires.
  15. Install the spark plug access cover.
  16. Connect the negative battery cable.
  17. Start the vehicle and check for leaks. Fig. 2: Remove the clamp and detach the vent hose 90953p66.jpg
    Fig. 3: Remove the spark plug cover and the plug wires or ignition coils to access the retaining bolts 90953p80.jpg
    Fig. 4: Remove the retaining bolts 90953p72.jpg
    Fig. 5: A light tap with a soft-faced hammer is usually required to loosen the valve cover 90953p81.jpg
    Fig. 6: Carefully lift the upper cylinder head up and off the lower section. Note the integral camshaft bearing caps in the casting 90953p82.jpg
prev.gif next.gif

Jan 29, 2011 | 1999 Volvo S70

1 Answer

How to remove valve cover to replace valve cover gasket


REMOVAL & INSTALLATION

1C-LTC and 2CL-TC Engines
(see Figures 1 and 2)
  1. Disconnect the negative battery cable. Remove and label all electrical wiring, connectors and vacuum hoses necessary to gain removal clearance.
ce45839.jpg

Fig. 1: Loosen and remove the cylinder head cover retaining nuts
  1. Disconnect the PCV hose.
  2. Remove the six nuts and seal washers from the cylinder head cover. Loosen them in a crisscross pattern.
  3. Remove the cylinder head cover and the cover gasket from the cylinder head. Discard the gasket and replace with a new one.

To install:
  1. With a wire brush or gasket scraper, remove all the old gasket material from the cylinder head and the cylinder head cover gasket surfaces.
  2. When the cylinder head surfaces are free and clean, apply beads of sealant to the cylinder head in the locations shown in the accompanying illustration.
4095e24.jpg

Fig. 2: Be sure to apply sealant on the cylinder head prior to cover installation
  1. Install the new gasket in the cover. Make sure that the gasket seats evenly.
  2. Place the cover with the gasket onto the cylinder head.
  3. Install the six nuts and seal washers. Tighten the nuts to 65 inch lbs. (8 Nm).
  4. Connect the PCV hose. Connect all removed vacuum hoses, connectors and electrical wiring. Connect the negative battery cable.
  5. Start the engine and inspect for oil leaks. Repair any leaks as necessary.

Hope this help (remember comment and rated this).

Apr 16, 2010 | 1990 Toyota Camry

1 Answer

How to tune up the lexus rx300 can't locate the plugs


This is a lenghty job!! You would have to remove the plastic engine cover to locate the plugs (cover that has the lexus symbol). There are 3 coils(black squarish units) on the front head and another three in the rear head. You must remove these to access the sprakplugs. Front is very easy!! The rear is difficult, you would have to remove the intake(special tools are needed) to access the rear coils and sparkplugs. hopefully this helps

Jul 24, 2009 | 1999 Lexus RX 300

1 Answer

2007 xl7


Brake lights were easy... open hatch you will see 2 lil circle covers with a notch out of the bottom for removal... i used a flat head to remove these then used a phillips head screw drive to remove the two screws behind the covers... pull out unit and you will see where the bulb goes... pull that out and just put the bulb in. It was sooo very easy... thanks Kim

Sep 21, 2008 | 2007 Suzuki XL-7

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...