An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: Key undetected ram pickup 2014
Sounds like an incomplete configuration procedure. Did you do this yourself or did you have the dealer do it? There may be a difference between configuring the wireless fob and allowing the vehicle to learn the new transponder to overcome the immobolizer.
Testimonial: "lo hice con un distribuidor, el problema es que al pulsar el boton de encendido en la pantalla muestra un mensaje donde dice que no detecta la llave, cual es el procedimiento se tiene que corregir para poder encenderla?"
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
to reprogram new key first you need to use 2 factory program keys.place first factory key in the ignition first turn ignition on for 3 seconds. then turn off ignition then install second factory in the ignition on position for 10 seconds.when immobilizer warning lamp begins to flash a acoustic signal is emitted.within 60 seconds. switch ignition off and remove key.then insert new key and switch on for 10 seconds a acoustic signal is emitted and immobilizer warning lamp remain illuminated for 3 seconds indicating programming completed.if all fails dealership has to reprogram new keys.
I doubt it. With the key in lock position the shifter should be locked and the steering wheel will lock as soon as you turn it. You would need to power several of the circuits including the wire going to the starter. Did the truck have an alarm / anti-theft system ?
The 2003 Sonata is equipped with a 'starter KILL' burglar alarm system with disables the starting system (using a N/C 'contacts' configuration instead of a N/O contacts configuration). N/C=Normally closed, and N/O=Normally open contacts. When the alarm goes off with a MY Sonata, the only way to DISARM it is with the key fob (remote) originally programmed for it (unless you purchase a new remote & have it programmed for the vehicle at an authorized Hyundai Service Department). NOTE: So long as the keyless entry & burglar alarm system is functioning/operating normally, the alarm will keep going off and the STARTER KILL function will still prevent you from starting the vehicle. One option is left without purchasing a new remote and having it programmed. 1. When the alarm goes off, get into the vehicle and insert the ignition key into the ignition. 2. Turn the key to the 'RUN' position (NOT the ACC position) and wait for the alarm to STOP (usually about 3 to 5 minutes). 3. The engine should then start using the ignition key.
If this procedure doesn't work, the problem will need further diagnosis by a qualified/certified Hyundai Service Technician.
sometimes turning the ignition on 3 times quickly without starting will reset the computer. If the van has power locks and keyless entry then try using only the keyless entry. Sometimes your car wont have a alarm but an anti theft device which will not allow it to start if it goes off or something triggers it.
it sounds like you may have an aftermarket alarm system. it can be removed completely from the vehicle. if it is a factory system the key fob or unlocking the door wit the key should disarm the system. if they dont you may want to have a dealer or reputable shop check the system