Question about 2008 Honda Civic
Yes, if the back seat has been pulled out for some reason, it sounds like the multi-pin connector (like a Molex connector) was not re-attached. You'll probably find it under the seat if you pull it out....
Posted on Nov 29, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Fuse # 20, located in the Junction Block (interior, drivers side). This is a ten amp fuse.
Read the information at the above site. The TSB (technical service bulletin) may be of interest to you.
Posted on Nov 20, 2008
This is not un- common. The heating elements do wear after a while. It is probably an open circuit in one of the pads in your seat. A quick restance check can determine which one it is.
Posted on Jan 24, 2009
SOURCE: FRONT HEATED SEATS
you need to check the resistance in each of the heated seat elements in the seat. There's a two wire connector under the back of each front seat. The connector should be green. disconnect it and measure the resistance along the circuit going into the seat. if it isnt .1 - .3 ohms, replace the appropriate heated seat element
Posted on Jan 06, 2010
yes maybe a fuse, also look under the seat and ensure the wire is connected they sometimes get caught when moving the seat back and forward and split against the metal seat base.
Posted on Jan 16, 2010
Tips for a great answer:
Apr 12, 2015 | 2008 Honda Odyssey
Dec 06, 2013 | 2005 Honda CR-V
Nov 28, 2012 | 2012 Honda Civic
Dec 13, 2010 | 1997 Honda CR-V
Apr 04, 2010 | 1997 Subaru Outback
Nov 14, 2009 | 2006 Honda Civic Hybrid
Nov 05, 2009 | 2000 Honda Civic
Nov 04, 2009 | 1999 Honda Civic
Apr 01, 2009 | 2009 Honda CR-V
57 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: