Question about Cars & Trucks

1 Answer

Peagot 307sw 2005 model just cranks does not want to start?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 36 Answers

The fuel pump may have failed. does it have any spark at the plug leads. does it wind over fast. If so maybe the timing belt broke. Remove spark plugs see if engine has good compression above 130 psi is acceptable. If comp is quite low maybe bent valves. may require auto shop for this. other things to check are crakshaft sensor and camshaft sensor. Hope this will help.

Posted on Nov 29, 2014

  • Anele Fanie Dec 02, 2014

    Thanx I wil do those checks!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 model Nissan Xtrail cant start but just cranks. i parked it fine


removed the two 'Fuel Pump' fuses from driver side fuse box located underneath the steering wheel. one is 10A (Red) and other is 15A (Blue). Then started the car, car started for couple of seconds before the engine went dead again. put back both the fuses, cranked the engine and it started fine, there was bit of smoke for first few minutes but it all cleared up.

Feb 16, 2016 | 2005 Nissan X-Trail 2.5i

2 Answers

I have 2005 I changed the starter and battery good but it still won't start


First does it crank, if it does then check to see if the fuel injectors are getting fuel.....could be a fuel pump...

second....if there is nothing when you turn the key and the battery is good and the starter was replaced...it could be a bad ground.....thats the ground coming off your battery and goes to your chassis of the car.........let me know how you make out.

Sep 24, 2015 | Dodge Stratus Cars & Trucks

1 Answer

Why wont my 2005 5.6 liter titan start tries to start and wont


Are you saying it cranks good but won't start or won't crank? Any codes? If it cranks most likely the ECM relay in the IPDM.

Aug 22, 2014 | 2005 Nissan Titan Crew

1 Answer

2005 Chevy Aveo cranks but won't start.


Chevrolet Aveo 1,6 LS won't start just cranks crank angle sensor ok and coil ok

May 14, 2012 | Chevrolet Aveo Cars & Trucks

1 Answer

Peugeot 307 sw ignition switch fuse keeps popping????sometimes the car will start and work normally but other times the dash lights illuminate but nothing works and the car wont start. replace the ignition...


there are three likely problems.... check the battery of the vehicle if the battery is still ok, or the alternator is not supplying the right power and finally the fuse box has some burnt part in it internally...

Jan 31, 2010 | 2005 Peugeot 405

2 Answers

2005 chevy malibu not starting will roll over but would not start


Possibly crank sensor. If the ECU does not receive the pulse from the crank sensor then the coils will not spark hence engine spins but no start.

Nov 18, 2009 | 2005 Chevrolet Malibu

1 Answer

Cant find fuse for retracting mirrors on peugot 307sw,mirrors stuck closed


Look inside the engine compartment. Theres's a black-box in there containing fuse. Alternately, look under the dash-driver side.

Oct 20, 2009 | 2005 Peugeot 405

2 Answers

2005 crank position sensor location on a chrysler town and country van


The crank shaft sensor on that model should be on the driver side towards the back of the tranny its not hard to get to.

Jun 27, 2009 | Chrysler Town & Country Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...