Question about Hyundai Terracan

Open Question

2004 Hyundai terracan. When I use the main beam the radio briefly goes off. Have replaced the alternator and situation has improved but still happens occasionally. Is it a faulty relay ?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to find radio code to a hyundai terrcan 2004


normaly they put it in two places,first is on the back of the radio casing and the alternative is in the ownersmanual

Jul 23, 2014 | Hyundai Terracan Cars & Trucks

1 Answer

Hi Im trying to wire a set of spoties into the high beem circuit through a switch in the cabin but it seems to have a neg switch system can you supply a dia to help me . 06 Terracan Highlander Cheers...


You need to tap into the high beam RELAY power. The computer uses a signal to switch on the lights, it sees a signal and tells the relay to come on using a lower voltage or even as you suggested a ground, when the relay closes it sends voltage to the lights.

Oct 20, 2013 | 2005 Hyundai Terracan 2.9

1 Answer

My proglem on my 2004 terracan with engine managerment light flashing went you give power and up hill


Check injectors. Probably they start leak . I has the same problem - after change problem gone

Sep 07, 2013 | 2005 Hyundai Terracan 2.9

1 Answer

My hyundal 2004 terracan 2.9 engine management light flashing up hills


Comon problem - first - check injectors - they can overleak -second - pressure on pomp too low- damage inside from bad fuel - this is extremal but hapend .
I thing more about first posibility - try start at this

Sep 07, 2013 | 2005 Hyundai Terracan 2.9

1 Answer

Have an hyundai terracan 2004 and i have recently just change the brake pads but somtimes the brake feels like it gone real stiff and wont brake to a hault it seems to be more in the morning when its first...


Let me get this straight... you had the brake pads replaced, but the rotors were not 'RESURFACED' or 'MACHINED'??... If this is the case, then the new brake pads will take longer to 'SEAT' to the rotors. SEAT - wear into/match the mating surface. If the surface area of the new pads don't MATCH the rotors, then FULL contact of the frictional surfaces have not happend... resulting in POOR braking system performance. ALWAYS have the rotors resurfaced/machined when replacing pads -- this ensures the new pads SEAT with the rotors.

Feb 10, 2011 | 2004 Hyundai Tucson

2 Answers

My serpantine belt has been dislocating many times from alternator, how to improve this situation? should I change the alternator with a new one? My Car is Suzuki Aerio 2004, please help me to solve this...


Before replacing the alternator or belt I would take a look at the belt tensioner. Sounds like the belt is loose, and that would be a problem with the tensioner.

Aug 19, 2010 | 2004 Suzuki Aerio

1 Answer

Intermittant fuel gauge problem with a hyundai terracan 2.9 diesel 2004


Had the same issue. Replacing the sending unit in the tank fixed it.

Oct 10, 2009 | Hyundai Motor 2004 Accent

2 Answers

Hyundai terracan 2.9 deisal 04 runs fine when feul tank is full but when it gets to quater of a tank of feul starves it self of feul then engine light comes on and stalls. to get it to start again you...


dear friend: i think that your terracan is actually running out of fuel even if the guage shows quater,you can also put the old fuel filter back and try it,we did discover some of the new filters sucking air.

Sep 09, 2009 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...