Question about Cars & Trucks

1 Answer

Detroit diesel 6.2 diesel tork specs - Cars & Trucks

Detroit diesel 6.2 diesel tork specs

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 364 Answers

6.2L diesels ... 84-86 time period (mostly 1984) & were powered by 6.2L Detroit Diesel V8 engine. ... Many M1028s were upgraded at the company level to M1028A2 and A3 specs. ... rated at 155 hp (116 kW) and 240 lb·ft (325 N·m), which was 5 hp (3.7 kW) .

Posted on Nov 30, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: replacing head after repair bent valves need tork specs for head

if interested i can e-mail you a diagram of the torque sequence and torque values just did one this weekend.

Posted on Nov 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine interchange


it will be unlikely as a Detroit engine is designed to fit gearboxes behind it . IT is a standard 1 or 2 housing and by knowing this it cam be decided if a certain box used in heavy vehicles will fit behind the engine . Having said that there may be an adaptor plate to do what you want. Talk with Detroit engineers in line for any information that they can give. However the 4 cylinder 2 stroke Detroit diesel was not an engine that met emission standards and thirsty and was a very noiye engine that in a car will make listing to the audio system practically impossible

Aug 23, 2014 | Cars & Trucks

1 Answer

Whats the tork spec on a 5.3 gmc


Here's a guide to the head bolt torque.

Jan 20, 2013 | 2005 GMC Sierra

1 Answer

Detroit diesel injector installation


thoroughly clean area around injectors,and then blow with compressed air so no bits will fall in the holes when injectors removed.loosen main injector pipe nut,remove return fuel line,dont lose copper washers,put special fuel bolts back in top of injector firm[by hand] undo holding down bolts evenly,undo fully injector pipe nut,.gently pry injector loose,and remove,making sure sealing washer at bottom also comes out..while I dont specifically know this particular engine,this guide applies to most diesel motors.I have rebuilt a 6v72 detroit motor,yrs ago.Assembly is reversal.may need to crank over to bleed diesel at injector,always use new sealing washers.

Jul 01, 2010 | 1990 Mercedes-Benz 300 Diesel

1 Answer

Hello I have 6.0L diesel need the torque sequence for the heads


If it's a 6 or its a V-8 it does not matter as long as you start from the center and work your way out to both ends I will do it by numbers using an example of 10 bolts like this do this on both heads and follow the same pattern for the intake system. also go from slightly tight just touching 5 pounds then re due it at 20 pounds then again at 40 pounds then 60 and finally to the exact tork setting using a maker double check the bolts one by one and mark with ink so you know that one is done on the last tork setting give it just a slight click past the exact tork.hope this heps.

9 5 1 3 7
10 6 2 4 8

Jan 19, 2010 | 2004 Ford Super Duty F 450

1 Answer

Need the tork spec for the rods, mains, and cam 99 cav 2.2


go to any good parts store and get or order
a repair book specific for your car that
will have the info that u require

gl G

May 03, 2009 | 1999 Chevrolet Cavalier

1 Answer

Replacing head after repair bent valves need tork specs for head


if interested i can e-mail you a diagram of the torque sequence and torque values just did one this weekend.

Nov 14, 2008 | 1999 Daewoo Nubira

4 Answers

Chevy 5.7 17 bolt heads tork specs


Cylinder Head Bolt (Preferred Method) All Bolts First Pass in Sequence 22 ft.lb Long Bolt Final Pass in Sequence 75 deg. Medium Bolt Final Pass in Sequence 65 deg Short Bolt Final Pass in Sequence 55 deg. Cylinder Head Bolt (Optional On-Vehicle Strategy) First Pass in Sequence 26 ft.lb Second Pass in Sequence 44 ft.lb Final Pass in Sequence 66 ft.lb

Oct 13, 2008 | 1999 Chevrolet C1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...