Question about Cars & Trucks

1 Answer

I have a snow globe that the water has turned a tea color. How should I go about opening it so I can change the water?

I just want to change out the water but I am afraid of breaking everything. If I can save it that would be great. Thanks for any amount of help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 623 Answers

If you carefully remove the base, you may find a plug you can remove. Carefully remove that plug and refill the globe with DISTILLED water.

Posted on Nov 29, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 14585 Answers

SOURCE: 2001 crysler concorde- the globe box is stuck &

Look in the hole and you should see an arm (wire or plastic) coming threw a slot in the door. Push it in and the door will open. If it is plastic and has disintegrated, then you will have to have an "L" shaped piece of steel to push the lever. the steal in wiper blades work get for this. Easy to bend, and you can find them at any auto parts store in the trash can.

Posted on May 12, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Signal light question: if unit damaged, will it work with a bulb change? '94 Honda Del Sol.


Most likely the impact of the collision has broken the globe filament. I had many years ago the whole back of one of my vehicles smashed in with missing smashed broken covers on the brake and signal lights. I replaced the globes and used cellophane and gaffa tape as it had to show the correct color until I could get the back of the car fixed.
You could use clear or correctly colored cellophane if the signal cover is missing and use gaff tape or packing tape - taped at the edges on to the car body to seal it until you can get it fixed to protect it from water ..

Apr 25, 2017 | Honda Cars & Trucks

1 Answer

How do I unstick snow that stuck on the inside of a snow globe


shake it extremely vigorously. GENTLY THROW IT ONTO A CUSHIONED SURFACE TO DISLDGE IT.
ERRR, MAYBE THIS IS THE WRONG CATRGORY?

Jul 02, 2015 | Cars & Trucks

1 Answer

How do i replace headlight globes on mr2 sw20?


Turn headlights to on. Then 2 clicks back to turns lighs off but keep headlights up/open.

Remove headlight shrouds, (Black plastics.) Use phillips + head screw driver.

Remove chrome trim ring using phillips head screw driver.

Pull out headlight bulb. Disconnect from harness.

Reverse to install.

Sep 12, 2014 | 1991 Toyota MR2

1 Answer

Replace park bulb.vt commodore


To replace the front parklight globe on a vt commodore can be a little tricky.

1.turn the lights on to see which 1 is inoperative once you know turn lights off.
2.open bonnet
3.go to side that is inoperative and on the back of the headlight you will see a round large plastic cover turn this to release it.
4.under the headlight globe there will be 2 wires flow these to the park globe socket gently twist and pull it out.
5.once the sockets out and you can see the globe ,pull the globe out of socket.
6.push new globe into socket
7.refit the socket in headlight
8.refit all trims
9.turn lights on make sure new globe is work..

Jan 22, 2014 | Cars & Trucks

1 Answer

Airblown snow globe instructions


"snow" is small styrofoam pellets that get sucked into the blower on the bottom..there is a sort of recycleable drain in the base that allows the pellets to be reblown over and over..HOWEVER if the unit gets wet, the pellets stick together and will not go through until dried out..to dry.. use a hot air blowdryer to heat the material carefully ..as it is nylon.. it can melt...then the pellets and drain may need unplugged..(unstuck)

Dec 15, 2013 | Cars & Trucks

2 Answers

My toyota 4runner is overheating but i have no water leak and yet my radiator is losing water


SOUND LIKE HEAD GASKET LEAK.CHECK ENGINE OIL FOR SIGNS ANTIFREEZE CONTAMINATION..OIL WILL LOOK LIKE MILK SHAKE.IF USING WATER IT EVAPORATES AT 212 DEGREES. ENGINE COOLANT TEMPERATURE CAN CLIMB UP TO 220 DEGREES.IF OIL IN CRANK CASE LOOKS GOOD.ADD 50/50 WATER AND ANTIFREEZE. ANTIFREEZE WILL RAISE BOILING POINT TO KEEP COOLANT FROM EVAPORATING.SEE IF YOU LOSING WATER ITS BOILING AWAY LIKE WATER IN A TEA KETTLE.

Feb 20, 2011 | 1994 Toyota 4Runner

1 Answer

Lo beam headlight replacement passenger side


open the bonnet, locate a screw on top of the headlight and undo it, locate two screws between the centre grill and headlight and undo them and locate a screw right behind the headlight assembly and loosen it. Now the whole headlight should come out. It wont come all the way out. By unplugging the electrical plug you can take it out completely. Lift up the lock thats hold the rear headlight cover and that will expose the internals of the headlight and then you can change whatever globe you want. First disconnect the wiring plug from the globe and then release the clip holding the globe and replace the globe and make you sure you dont touch the glass part of the new globe which installing. Touching it will shorten the globes life and there is a chance that it might explode inside and create mess. You need to buy H7 type globe for low beam.

Nov 10, 2010 | 2000 Mercury Cougar

1 Answer

Car misfires after rain or snow


well i would start looking at a spark problem coils, wires try by spraying a mist of water over the wires and coils with the engine running you will soon find out if thats your problem you will see sparks jumping and or the engine will start missing.

Mar 18, 2010 | 2001 Subaru Forester

2 Answers

How to change globe on headlight ford focus 2005


avatar3.jpg

brian_au no 1 solution is wrong.. globe is under a spring clip cover . remove cover, then unplug, then release retaining spring behind the globe. replacement is just process reversal

Sep 18, 2009 | 2005 Ford Focus

1 Answer

Need to change rear brake bulb on daewoo TACUMA CDX 2004 model but can not get to bulb any ideas please on how to change it


open rear hatch and remove 3 screws down edge of lamp assembly gently pull assembly out and then you can remove globe sockets from lamp assembly to change globe

Jun 24, 2009 | Daewoo Korando Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...