Question about Cars & Trucks

2 Answers

Hello. i have a 2001 Cadillac statesman. This is a var made for funeral services. AS far AS i know, its originaly a deville. My problem concerns The remote control for The doorlook system. It suddenly stopped working. I canged The remote Battery, but that did not Help. Are there any way to access The cars programming to see if i can recalculate and sync The remote? Or could This be a different problem. Fuses maybe?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 15,478 Answers

The electronics that control the remote are in he Electronic body control module, This is a computer under the dash and it is not cheap to replace.

Posted on Nov 28, 2014

  • Kenneth Dahl Nov 28, 2014

    Sure Hope The solution is cheeper :)

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

This issue usually ends up being a carroded wire or a blown fuse. I would look and clean the battery posts and check the Fuse and wire that powers the alarm.

Posted on Nov 28, 2014

  • 3 more comments 
  • Kenneth Dahl Nov 28, 2014

    I am a put puzzled egen ut comes to The Battery. Does The var have to batteries? I have one battery under The Floor behind The passenger Seat, and under The Hood i CAN only find a +and ground that leads to The Battery. I Will try Your solution first, and Hope that ut is that easy to fix :)

  • Kenneth Dahl Nov 28, 2014

    Sorry about the spelling. Norwgian phone dictionary :)

  • brucecopebas Nov 28, 2014

    Look at the Engin Compartment Fuse Box and look for #5 inside the box. This is the relay for the power locks.

  • brucecopebas Nov 28, 2014

    oops it the fuse for the relay

  • Kenneth Dahl Nov 28, 2014

    thank you! im gonna check it tomorrow:)

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 2001 Cadillac Deville Security System

I had a similar problem intermittent NO START. No click, buzz or other noise. Everything worked but wouldn't start. Unfortunately it took two trips to the dealer to locate the problem. Next time it happens find the purple wire in the wire harness under the cover on top of the engine. A simple tester that connects to ground with an lighted "awl" type probe will tell you if there is power from the key to that point. If there is and you're not starting then the only other thing downline is the starter. Can't repair them only replace. Dealer will be about 900.00 P&L , If you're daring or have some help it's right on top DIY 400.00.

Posted on Apr 21, 2009

Molson02536
  • 3854 Answers

SOURCE: programming a keyless entry remote

Key Fob Auto Learn
This procedure will first erase all known key fobs. The procedure will then program a single or multiple key fobs. Method 3 is a series of three 10-minute key cycles, for a total of 30 minutes. This procedure requires that you have a replacement key fob and the vehicle mechanical key.

Important: All previously programmed key fobs will be erased upon completion of the 30-minute programming procedure. The order in which the key fobs are programmed will determine its numbering position within the RCDLR memory. The first key fob programmed will be key fob #1, and the second key fob programmed will be key fob #2. The number stamped on the key fob case is for reference only: #2 can be programmed as #1.
Do not place any known good key fobs in the vicinity of the vehicle when programming. 

The vehicle must be OFF. 
Place the replacement key fob in the console pocket with the buttons facing forward. 
Insert the vehicle key in the driver door lock cylinder located in the driver door handle and cycle the key 5 times within 5 seconds. 

The DIC will display a message: OFF/ACC TO LEARN. 
Press the OFF/ACC portion of the ignition button. 
The DIC will display a message: WAIT 10 MINUTES, then it will count down from 10 to 0, one minute at a time. 
When the counter reaches 0, DIC will display OFF/ACC TO LEARN. 
Repeat steps 5-7 two more times, for a total of 30 minutes. 
The DIC will display a message: OFF/ACC TO LEARN. 
Press the OFF/ACC portion of the ignition button. 
A beep will occur and the DIC will display: READY FOR FOB 1. At this time all previously known key fobs have been erased. When fob 1 is programmed a beep will be heard and the DIC will display a message: READY FOR FOB 2. 
Additional key fobs can be programmed by taking fob 1 out of the pocket and inserting fob 2. If desired, up to 4 fobs can be programmed. Once 4 fobs have been learned, the DIC will display a message: MAX FOBS LEARNED, and automatically exit the program mode. 
If learning less than 4 key fobs, press the OFF/ACC portion of the ignition button to exit the program mode. 
Operate the active portion of each key fob in order to finalize the programming sequence and verify correct system operation. 

Good luck and hope this help's keep me posted, there are 3 other methods and the 5th method is a tech 2 scan tool that the dealer uses but this should work on your year of cadillac. 

Posted on Jul 01, 2009

  • 97 Answers

SOURCE: 2001 cadillac deville, overheats without loss of coolant

First, provided their are no visible coolant leaks and/or loss of coolant with no signs of leaks, I would thoroughly flush cooling system and replace coolant, then check and/or replace thermostat (you can place thermostat in boiling water to check for proper function), if you have tried these 2 steps and still are experiencing overheating you may need to replace your water pump which can be a tricky job if you're unfamiliar and try to do it yourself, however, I could walk you through it if necessary. Also visually check your radiator hoses for bulges, wear ,etc along with heater hoses etc. You may want to also check radiator fins to see if they are dirty/obstructed and clean if necessary. Let me know if I can assist you further and how it works out

Posted on Aug 30, 2009

  • 1 Answer

SOURCE: 2001 Cadillac Deville problems starting

I have had the same problem and I have come to the conclusion it is the security system. After 3 minutes the car will start so there is nothing wrong with the battery or starter. I have had it to the dealer a few times and they cannot solve it. It may be the locks on the doors and they may not be resetting properly. I have learned to live with it.

Posted on Oct 14, 2009

bluebirdmate
  • 1190 Answers

SOURCE: how to program a keyless entry remote for a 2001

Hello, To answer your question about programming a keyless entry remote you need a scanner tool that has the capability to accomplish this task. A GM Tech 2 or something else that has the ability to do what the Tech 2 does. I know this is not what you want to hear but I am reading it right out of the Cadillac Service Manual. Thank you

Posted on Sep 05, 2010

Testimonial: "Thank you so much for the helpful reply!!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I recently bought a 2002 Cadillac deville the steering column has been changed and the car will not start


Cadillac Deville 2001 won't start, engine won't ... - CarGurus

www.cargurus.com > Questions > Cadillac > DeVille

CarGurusJan 21, 2014 - Cadillac Deville 2001 won't start, engine won't turn over - My cadillac won't start. ... Crank not starting - service theft system in dash: There are 2 starter ....I have a 2002 Cadillac ... that all of a sudden stopped turning over ...

2001 cadillac northstar cranks but wont start. - YouTube

? 3:50
https://www.youtube.com/watch?v=t5SBKPut7G8
Mar 30, 2014 - Uploaded by eastcoasthoopty
2001 Cadillac wont start thought it was the chip in the key but it was ... I have a 2002 Seville In the morning I start my car noproblem, once its ...

Cadillac Deville 2001 won't Start - YouTube

? 0:43
https://www.youtube.com/watch?v=aUdX_Vnt1qI
May 10, 2013 - Uploaded by Shane Moore
Cadillac Deville 2001 won't Start .... i have a 2002 cadillac DTS. My issue is it will not idle, it will not start unless you have your foot to the gas all ...

2001 cadillac deville starting problem - YouTube





Dec 29, 2015 | Cadillac Cars & Trucks

1 Answer

2001 Cadillac. Devile. Code p 0732 what. Do i do fix issue


2001
Cadillac DeVille DeVille VIN K Service Manual Document ID: 857062
01-07-30-009B: No Power on Heavy Acceleration
or 1-2 Shift Concerns - Delays, Slips, Flares, DTC P0731 or P0732 Set (Replace
Transmission Fluid Pressure Switch Assembly or Lower Control Valve Body
Assembly) - (Feb 6, 2002)

Aug 10, 2013 | Cars & Trucks

1 Answer

2001 cadillac deville service system stability


Whenever this warning or any other stays on in the dash it is indicating that the systems control module has detected a fault, it then disables the system as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Sep 19, 2012 | 2000 Cadillac DeVille

1 Answer

Can i leave my iac sensor unplugged on my 2001 cadillac deville it runs fine without it


IAC yes you can your IAC is idle air control why dont you use a throttle body cleaner see if that solves your concern

Jun 08, 2011 | Cadillac DeVille Cars & Trucks

1 Answer

How to program a keyless entry remote for a 2001 cadillac deville


Hello, To answer your question about programming a keyless entry remote you need a scanner tool that has the capability to accomplish this task. A GM Tech 2 or something else that has the ability to do what the Tech 2 does. I know this is not what you want to hear but I am reading it right out of the Cadillac Service Manual. Thank you

Sep 05, 2010 | 2001 Cadillac DeVille

1 Answer

How do i remove the sub woofer at the rear deck of a 2001 cadillac deville. i just need instructions


Hello; You have to remove the bottom and back cushion of the back seat then remove seat belts, rear window screen if equiped then remove the rear shelf trim panel. Thank you

Aug 31, 2010 | 2001 Cadillac DeVille

1 Answer

My service transmission message light in constantly on


whendoes the transmisson on a 2001 Cadillac deville need to be serviced?

Aug 09, 2010 | 2001 Cadillac DeVille

1 Answer

2001 DeVille: Cad 2001 deville, When I press the brake peddle, I...


thanks for the good information

the air sound AND the hard pedal means you have a brake booster concern

if the car is running ok we can rule out vacuum leaks so that leaves the check valve but with the car running even a check valve wont cause the concern

therefore you need to replace your booster

semi-tough job because you have to remove the master cylinder and typically there may be some push rod adjustments afterward

depending on your level of experience you may want to seek professional assistance



May 07, 2010 | 2001 Cadillac DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...