Question about Cars & Trucks
Light comes on and engine starts missing but if you shut it off and start it again it will run fine for a while and then it will happen again
Your owners manual will tell you what this warning light is for. Or a Chiltons/Haynes repair manual for your make/model/year. I would suggest you plug a code reader in and see what it says.
Posted on Nov 27, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Missing a owners manual
The warning light on the dashboard indicates that your vehicle will require servicing soon, depending on your mileage, different services are required. It does not mean anything is wrong with your vehicle, you do not need to tow it or not drive it, however you want to get regular servicing of it soon.
Posted on Sep 15, 2009
YOUR CORRECT IT IS A COIL PROBLEM.... DO A REGULAR 6 MONTHS TO A YEAR TUNE UP AND YOUR CAR WOULD RUN PERFECT....
Posted on Apr 14, 2010
Testimonial: "Thanks - how do I know which coil or do I just change them all"
you need to have your obd3 Diagnostic Trouble Codes read Most auto parts stores will do this for you. This will give you a better idea where to start.
Posted on Aug 19, 2010
Don't know how handy you may be but would seriously consider removing instrument cluster, and checking solder on circuit board. Just did mine, wasn't hard, maybe a couple of hours work. Nice small, pointed solder gun will be needed as well. They have had many weird problems with gauges, starting, running etc, all narrowed down to that printed circuit board, where the solder on the contact pins become corroded or cracked and cause some pretty weird stuff. At the very least, try removing dash enough to remove 4 screws holding cluster in, and pulling off connectors and putting them back on a couple of times, just in case it's just a dirty connection. If you decide you want to try it, and need more specific instructions, let me know, or even google , Dodge or Plymouth instrument cluster soldering, as there is some pictures and videos out there on the subject. Good Luck, and let me know how you make out.
Posted on Oct 31, 2010
Tips for a great answer:
Nov 21, 2015 | 2006 Chrysler 300C Base
Jul 06, 2015 | Cars & Trucks
Jul 27, 2014 | 2004 Saturn L-Series
Mar 02, 2013 | BMW M3 Cars & Trucks
Aug 31, 2011 | 2001 Volkswagen Passat
Oct 21, 2008 | 1992 Audi 80
70 people viewed this question
Usually answered in minutes!