Question about Toyota Cars & Trucks
This means that inside the gear box one of the plates were put in back to front i had the same problem a few years back im just not sure which plate (cog) it is if its the front or back plate have an mechanic have a look
Posted on Nov 27, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It appears you have a Forward Clutch FAILURE. Replace the trans after you get it diagnosed and verified by a professional technician. By the way, do you have a Check Engine light? If so, what is the diagnostic code? The dealership can scan the system and find any codes which may have been stored in the TCM (Transmission Control Module). If there were any 'Incorrect Gear Ratio" codes, it's most probably the trans itself.
Posted on May 28, 2009
You need to remove top off gearbox and with a pry bar or screw driver pull the selector back into neutral Your gearlever has popped out of selector Gearbox does not need to be removed
Posted on Jul 10, 2009
take it back. They missed something. You should have a warranty on the work. Of course that does have limits which include both mileage driven and months since the vehicle was released to you. I am guessing you did not do the work since your saying you had it done. There really isn't much you can do other than have it taken apart and checked. So long as your TCM (transmission control module is not bad= computer for transmission)
Posted on Jan 11, 2010
I do a lot of work on Toyota Previa before; including rebuilt engine, swapping engine and transmission and lot of things in between, but never swap a normal aspirated engine to a supercharged engine or diesel. Since i have some experience in Previa, I would like to share my opinion with you regarding your plan to swapping the normal aspirated Previa engine to a Supercharged engine. When you do a swapp like that, you will not only be dealing with just swapping engine, but some wiring, computer, throttle body, air cleaner assembly, extra frame and pulley on the accessory items, transmission as well as a right rear end to get the correct gear ratio to accomodate the new engine and transmission. I can go on even more, but let me tell you this, beside less headache, it would definitely cheaper if you were to find a Supercharged Previa and fix it up. However, if you are totally motivated to do this project, keep in mind, this engine swap will be a long term and time consuming project.l I wish you best of luck and have fun!
Posted on Jan 17, 2010
I have a pajero junior 1997 4A31, I am having problems, with my gear, when take off in D the car is slow, and up hill no power in 2nd & D, in Load ok. Plse advise. Thank you.
Posted on Jul 23, 2010
Tips for a great answer:
Feb 20, 2011 | 1991 Toyota Previa
Sep 15, 2017 | 1991 Toyota Previa
Dec 02, 2010 | 1991 Toyota Previa
Nov 21, 2010 | 1991 Toyota Previa
Nov 01, 2009 | 1993 Toyota Previa
May 16, 2009 | 1995 Toyota Previa
May 11, 2009 | 1992 Toyota Previa
Mar 29, 2009 | 1991 Toyota Previa
Dec 25, 2008 | 1993 Toyota Previa
87 people viewed this question
Usually answered in minutes!