Question about 2007 Chrysler Pacifica FWD New Cars

1 Answer

Is there a fuse or relay to Tpms controller on a 2007 Chrysler Parfica

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 2,044 Answers

Yes, there is a Fuse that controls the Receiver for the Tire Pressure Monitor system.

Posted on Nov 26, 2014

Testimonial: "where is it located in the fuse box"

  • Todd Arndt
    Todd Arndt Nov 26, 2014

    If you pull your owners manual out, there are (2) differnet Fuse boxes. It is labeled in your owners manual. If you are trying to troubleshoot your TPMS light being on and you have checked your Pressure, I would RESET it and that will calibrate your system to the Correct Air Pressure. If then ti does not work, you have a Faulty Sending Unit (YOUR VALVE STEM). Go to a Tire Store and they can scan your Tires for you and tell you which one is defective. Good Luck

×

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 55 Answers

SOURCE: Chrysler Pacifica - Cruze Control

There is no cruise relay

Posted on Oct 18, 2008

  • 840 Answers

SOURCE: fuse chart for 1997 chrysler sebring jx

call Chrysler parts dept they can fax you a schematic for this

Posted on Jan 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mercury mariner 2007 horn blows none stop how .how do I fix the porblume Also where is horn relay located


It's inside the SJB - smart junction box ! It's non - serviceable . Is the air bag light lit on the instrument cluster ?Do you know what a smart junction box is ? It's a electronic module with a fuse / relay box built into it .

Module Controlled Functions The smart junction box (SJB) is the multifunction electronic control module on this vehicle. The SJB is a combination of a multifunction control module and a central junction box (CJB). SJB functions control multiple systems, which include:
  • auto locks
  • exterior lamps
  • illuminated entry and interior lamps
  • perimeter anti-theft alarm
  • power door locks
  • rear windshield wiper
  • remote keyless entry (RKE) keypad
  • RKE system
  • tire pressure monitoring system (TPMS)
The SJB is located under the front passenger side floor console. For removal information, refer to Smart Junction Box (SJB) in this section. For additional information on the interior lamps and illuminated entry, refer to Section 417-02 . For additional information on the exterior lighting, refer to Section 417-01 . For additional information on the power door locks, the RKE keypad, and the RKE system, refer to Section 501-14 . For additional information on the rear windshield wiper, refer to Section 501-16 . For additional information on the perimeter anti-theft, refer to Section 419-01A . For additional information on the climate control system, refer to Section 412-00A (Escape, Mariner), or Section 412-00B (Escape Hybrid). For additional information on the warning chimes, refer to Section 413-09 . For additiona information on the TPMS, refer to Section 204-04 .

Dec 26, 2016 | 2007 Mercury Mariner

2 Answers

My Chrysler 300 won't start. Problem is not battery or fuses. Not getting 12 volts to 5 amp fuse (fuse is good) for control voltage to starter relay. Applied 12 volts to fuse socket with ignition s


PLease, check if the check engine light lit up when you turn the switch, if it doesn't lit up, your EMC (computer) is not getting any electricity. And that could be the reason that you the fuses are OK but it won't start.

Jan 19, 2015 | 2007 Chrysler 300

1 Answer

Whats the codes p0685 an p0688 on a 2004 chrysler pacifica mean


P0685 CHRYSLER - Auto Shutdown Relay Control Circuit Failure

Short or open in Auto Shutdown (ASD) relay circuit
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
Possible Causes
- ASD relay circuit is open or shorted
- Failed Auto Shutdown relay
- Failed ECM
Tech Notes
Check all the ECM fuses, if the fuses are OK try replacing the ASD relay.

P0688 CHRYSLER - Auto Shutdown Relay Control Circuit Low

The Front Control Module (FCM) has detected the supply voltage below an acceptable value
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
Possible Causes
- ASD relay circuit is open or shorted
- Failed Auto Shutdown relay
- Failed ECM
Tech Notes
Check all the ECM fuses, if the fuses are OK try replacing the ASD relay.

Dec 29, 2014 | 2004 Chrysler Pacifica

1 Answer

Rear ac doesn't blow air


Power goes thru the rear blower relay, then the resistor and motor. The fan control switch provides the ground connection. I would check the rear blower relay if power is questioned at the blower motor.

Jul 06, 2013 | 2007 Chrysler Town & Country LX New Cars

1 Answer

Tpms 2009 suzuki xl7


see alldata dot com for this.
tire pressure meas. system.
why defeat this. just curious.?

Mar 17, 2013 | 2007 Suzuki XL-7

2 Answers

I have a 2004 Chrysler pacifica that would not start. We've had the battery tested and changed the starter. We've checked that there is power getting to the starter as well as the solenoid. We've also...


I have a 2007 chrysler Pacifica and it had the same problem. It would crank over but not start. Took some time to figure out but in the end the asd control wire that runs from the fuse box to the PCM was corroded in half about 5 inches from the fuse box. It would show 9 volts at the PCM but no continuity.
10_24_2013_12_06_58_am.jpg

Nov 28, 2010 | 2004 Chrysler Pacifica

1 Answer

TPM error problem on left rear tire on my 2006 300C


Before attempting to replace a Chrysler TPMS we advise the use of one our Bartec Wheelrite tools to establish the need for replacement and the nature of the fault. This may support a warranty claim but will also ensure that the dealer or tire shop is covered for liability claims. The legal position is that as soon as the dealer breaks down the wheel then he becomes liable and cannot allow the car to be driven away from his shop with the TPMS warning light still on. These can be replaced however you will need to go to a reputable tire shop or the dealer so that the new TPMS can be reprogrammed into the computer system. Any nationally recognized tire shop like Goodyear, Bridgestone ETC. should be able to assist you.

Aug 07, 2010 | 2007 Chrysler 300c AWD Sedan New Cars

1 Answer

Transmission wont switch gears and nothing in dash cluster works


this could be a relay or body control module as all things are controled electricaly in your van relays are under hood near front of engine ---did you check fuses first? relays next --even trans is controled electricaly

Jun 12, 2009 | 1999 Dodge Grand Caravan

Not finding what you are looking for?
2007 Chrysler Pacifica FWD New Cars Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...