Question about 1994 Oldsmobile Cutlass Supreme

1 Answer

How do I get air out ofcooling system 94 cutlass 3.1 motor

I have open air screw

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Take the radiator cap off & start the engine. Let it idle until the engine reaches operating temperature while watching the coolant level & keeping it topped-up. Replace cap.

Posted on Nov 25, 2014


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 82 Answers

SOURCE: want to know how to by-pass the security system on

Cut the wire that runs to the battery and one that goes to the egnition. You may need bolt cutters. Good Luck.

Posted on Nov 10, 2009

  • 4669 Answers

SOURCE: air will not get hot

Try flushing the heater core with a garden hose.

Posted on Mar 14, 2009

  • 4472 Answers

SOURCE: 94 cutlass ceira's ac will

Does your heat have this problem as well? If so it sounds like you have a vacuum leak. Check your vacuum lines for any cracks or breaks.
Thank you,

Posted on Apr 23, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How do i fix driver side power window on 94 olds cutlass ciera

Time for a new electric motor. The driver side wears out first because it is used most.

Dec 10, 2014 | 1994 Oldsmobile Cutlass Ciera

1 Answer

2007 dodge magnum repaced radiator now the reservoir is boiling and spitting out water while the car is running/idling water is jus bubbling up out of the reservoir what could this be

hello nikeea,not sure what car/truck we are talking about 07 doge or 94 cutlass??
in either case if the problem started after radiator replacement,it sounds like you have air trapped
in the system. if you look on the thermostat housing(at the end of top radiator hose that connects
to the engine) there maybe an air bleed screw to bleed out the air. open screw with engine warm & idling until you only have fluid coming out,close bleeder & top off system

NOTE; some modles will have an additional bleeder around the water pump area
leave the heater on high while bleeding system

Jul 08, 2011 | 1994 Oldsmobile Cutlass Ciera

1 Answer

I need to no how to get theromostat off and what the screw is for

take the thermostat housing off,and remove,also the screw is to bleed air out of the system once you open it,just leave the screw open once you fill it with coolant and close a couple of times until no air.


Oct 26, 2010 | 1996 Oldsmobile Cutlass Supreme Coupe

4 Answers

How many ignition coils are in a 94 cutlass supreme?

You didn't post your engine size so please choose the appropriate one:

Exploded view of the ignition coils and related system components-2.2L engine shown.......2 coil packs

The ignition coils are secured to the module with retaining bolts/screws-3.4L engine shown......3 coil packs

May 23, 2010 | 1994 Oldsmobile Cutlass Supreme

1 Answer

Problems with the air conditioner fan of Cutlasss Supreme SL '94

Sounds like you have either a bad fan connection or you need to replace the fan motor itself.

Check all the wiring leading to the fan, and the fan controller.

Nov 13, 2009 | 1994 Oldsmobile Cutlass Supreme

1 Answer

Want to know how to by-pass the security system on my 94 cutlass supreme 3.4 dohc motor

Cut the wire that runs to the battery and one that goes to the egnition. You may need bolt cutters. Good Luck.

Nov 10, 2009 | 1994 Oldsmobile Cutlass Supreme

1 Answer

1995 Cutlass Ciera : Can check list to repairing power windows

the motor window is worn out which is common. You will have to remove all screws on door panel and then pry panel off. You will then have access to the motor. It may have soldered wires on it. Others can pull off, or you can cut wires up stream and twist back together later with new motor

Sep 14, 2009 | 1995 Oldsmobile Cutlass Ciera

1 Answer

Air will not get hot

Try flushing the heater core with a garden hose.

Mar 14, 2009 | 1994 Oldsmobile Cutlass Supreme

1 Answer

94 olds cutlass ciera headlight lens

First you have to remove the corner turn signal and grill. Both should be held on with just some hex screws (3 in signal, about 6 in grill). Then you should see 4 black bolts. Unscrew those and the assembly comes right off. : )

Oct 27, 2008 | 1994 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1994 Oldsmobile Cutlass Supreme Logo

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides