Question about Cars & Trucks

1 Answer

How trouble shoot E7 error

Not running

Posted by on

  • Anonymous Nov 25, 2014

    Hi narcisoconcerman , I want to help you with your question, but I need more information from you. Can you please add details in the comment box?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 233 Answers

Without the year, make, model of the vehicle in question it makes it hard to determine what might be the issue. Assuming your car has an error code of E7 it has a computer and you have pulled the code. Try a google search and match to the vehicle as many car companies could use the same code number but for different faults. Many of these aren't cut and dry with one failing component causing the issue or tripping the code. It is a process of elimination at that point. Some of these can be tested simply using a multimeter. If you suspect one device, google how to test it to determine if it is indeed good or bad. Go down the line from there. Good luck

Posted on Nov 26, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition trouble shoot


Hey Ron,
AN internal combustion engine requires three (3) things to run...assuming the internals are good.
1. Adequate compression >120PSI
2. A properly timed spark
3. A proper fuel/air ratio

Start with one, and eliminate one at a time(make sure it works) - ..(this is the way a professional would trouble shoot an engine).

Sep 17, 2017 | Cars & Trucks

1 Answer

05dodge stratus will not crank ' just cut off one day. Already replace a lot of parts ,but nothing


For most modern engines, the quickest trouble shooting is by using code reader or scan. Once error code is retrieved, search for solutions by using that error code.

Dec 29, 2016 | Cars & Trucks

1 Answer

My Ford E-250 2004 cargo Van with 5.4 liter engine will idle smoothly but stops running when I touch the throttle. how do I trouble shoot?


Hope you had not dismantled the throttle. Kindly check for any vacuum leaks and also check the mass air flow meter if okay. You may run a diagnosis and attain error codes

Nov 13, 2016 | Ford Cars & Trucks

1 Answer

Headlights not working on a 2000 dodge neon


Are the fuse's good ? Do you know how to do electrical trouble shooting ? Go on youtube an check out videos on basic electrical trouble shooting , how to read a wiring diagram ! Then go to http://bbbind.com/free_tsb.html free wiring diagrams ! Then trouble shoot the circuit .

May 31, 2016 | Dodge Cars & Trucks

1 Answer

Trouble shooting 1990 toyota corolla fuel system, car runs then stop


To trouble shoot the fuel pressure you will need a fuel pressure tester, now if you dont have one start the vehicle (if it starts) open the gas cap and listen for the fuel pump it should humm and you will be able to here it. with thhe vehicle running you should be able to hear it and if it shuts off the car will stall, if it doesnt and the vehicle stall out you need to look elsewhere

May 29, 2011 | Toyota Corolla Cars & Trucks

1 Answer

The engine block indicator is on when engine running and only 2 sparks firing. loss of power.


the engine block indicator might be the computer check engine lamp. go to the local parts supply store that offer to plug into the computer to extract engine trouble codes. wright down all trouble codes. the trouble codes is only a guide for further trouble shooting.

May 03, 2011 | 2002 Mitsubishi Lancer

1 Answer

The car is back firing and juderring, it seems like it is starved of fuel but hte tank is full, also the engine management light is staying on


imasuming you mean the check engine light is on. if so go to an auto parts store that reads your codes for free. like auto zone or advanced auto.etc you need to find out the details of that code or codes. this will help you narrow down your trouble shooting.
if you cant drive it there here is one small thing you can do disconect the pig tail from the mass air flow see if it runs any better. it will still be ruff. if the engine is running now plug it back up if the engine gets worse and dies thats your most likely problem the mass air flow. you might have to do it a couple of times . this was just one way to trouble shoot one posability . thats why you need the cone and a print out of trouble shooting for the codes

Aug 11, 2010 | 2002 Kia Sportage

1 Answer

Engine warning in the shape of engine


if your car runs it may not be a big problem but it can turn into one if un-attended to. Same thing with those that no longer run, a scanner must be used to detect the problem via the engine's diagnostic port. The error code would tell you which part the error was detected for more accurate trouble shooting.

Jul 22, 2010 | 2004 Ford Focus

1 Answer

Trouble shooting on air suspension, only the normal height selected.But i can selected the 2 others height if i did it before the error message appear, i got approx. 2 minutes between the engine starting...


If the compressor has to run more than normal, there is likely a fault / leak in the system somewhere which these are notorious for. Check your airbags for leaks / spray all parts with a mist of water and soap to find where your air is escaping from.

May 09, 2017 | 2006 Land Rover Range Rover Sport

2 Answers

My 1996 chev blazer idles rough wjen put into drive


This is very common in all cars. First I would check the air filter and possibly replace. You may need to just do a good tune up on the car. New plugs, wires, air filter, and fuel filter would be a good start. Could also be the timing. A local shop can check that, but charges very. You may want to pick up the repair manual for your car,i f your the hands on type and run through the trouble shooting section.

Nov 20, 2009 | 1996 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...