Cars & Trucks Logo

Related Topics:

Posted on Nov 24, 2014

<!-- from fixya rte -->V40 engine management light is on - Cars & Trucks

1 Answer

A

Anonymous

If any light is on your dash, after the motor is running or your driving,you have a system failure, to find & diagnose

The light is on to protect one of the vehicle systems
I don't know without codes, any more than that

Have to look at scan tool data & go from there

I wouldn't be using it

Keep in mind this site is worldwide,not everyone
has heard of a V40 -- nor have I

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2003 Volvo v40 Runs awesome Won't pass smog because check engine light won't light. wouldn't it throw a code if it had a bad connection or broken wire? No codes it just doesn't work. HELP

There is a light bulb inside the dashboard that needs to be replaced. You unscrew the dashboard and then unclip the dash cluster out from the dashboard and replace the bulb behind the check engine light slot. Should take less than a half hour. Most auto parts stores stock the bulbs.
0helpful
1answer

Engine management light on

have system ck with scan tool at local shop or parts store.
0helpful
1answer

Engine management light on p code p0340, which is camshaft sensor malfunction. new sensor has been fitted with no change also wiring to ECU checked and o.k. Fault cleared car started no light on. engine ...

did you use a OBD-II scanner to erase codes!! this method is prefered. if you do not have one, auto-zone will erase the light for free. good-day !
0helpful
1answer
0helpful
1answer

Engine management system malfunction light is on, car still drives well ?.

could be anything from a lambada sensor to the brake fluid level low
0helpful
1answer

Engine management system light flashes and engine judders

Change your mass air flow meter.That give that problem.
3helpful
1answer

Volvo V40 warning light

hi.its your engine management warning light,nothing too serious,get a diagnostic check.thast should let you know where the problem is.
2helpful
6answers

Daytime driving lights

turn the lights off at the headlamp switch, hold the high beam flash stalk on and turn the light switch all the way on and then all the way off again. This toggles the DRL on my 2004 V40.

cannot remember if you have to have the ignition on (engine not running) or engine off.

give it a fiddle and see what happens.
Not finding what you are looking for?

31 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...