Question about Ford Mondeo

1 Answer

How to change a bulb on interia - Mondeo Ford Cars & Trucks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

Look at the forward facing edge of the light nearest the windscreen and you should see a tiny cutout in the middle of that edge, push a small flat blade screwdriver into that gap & carefully prise & it should move the metal tab under there & allow the light unit to move out of the roof.

Posted on Nov 25, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just put in a new fuel pump. i hve power at the interia switch but no power at ful pump what can be doing this


Typically the inertia switch is the last component interrupt before the fuel pump, meaning the signal thru the inertia switch goes straight to the pump without stopping anywhere else. NOW, when you say you have power at the inertia switch, do BOTH WIRES Have power(When priming or crankiing)? If only one has power and the other does not, the switch is either "Popped" and needs the button press reset, or the switch has FAILED. Period.
If BOTH wires have power when cranking, then you have a broken wire or disconnected plug between the inertia switch and the pump.

Jan 12, 2015 | 1998 Ford Econoline

1 Answer

How to check interia switch


Ford uses a simple switch with a weight inside. It is either on or off which can be tested with a meter. If it is often tripped when going over bumps or other vibrations, I would replace it.

Aug 23, 2012 | Cars & Trucks

1 Answer

Astra mk5 inertia bulb replacement


Try taking the bulb out and inserting it the opposite way round some interior bulbs have + and - poles and must be inserted the right way round

Aug 13, 2012 | Vauxhall Astra Cars & Trucks

1 Answer

Have lost my interia lights and cig socket not working have a *** import toyoat lucida td cnt read japanese need to change fuses how


it has to be a fuse you have two boxis under the hood and somewear under the dash you will need a test light for that

May 24, 2012 | 1984 Toyota Cargo

1 Answer

I want a fuse box diagram for a 2004 ford expedition (eddie bauer.)... just want to change my fuses.example:horn fuse,rear wiper fuse and interia light fuse.


  • Here is a copy of the manual http://min.us/l54dFZqUJATph . Download it to have for the future. Pages 249 - 259 deal with the many fuses in your truck. This way you can have a layout to all your fuses for the future.


  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.


Regards, Tony

Oct 15, 2011 | Cars & Trucks

1 Answer

Interia lights do not come on when the car doors


check your fuse. im not 100% but it should be a 10A

Aug 05, 2009 | 2004 Mitsubishi Eclipse

2 Answers

Fuel pump reset button location


If you mean the Interia switch , it is located at driver's sidefront door post

Aug 05, 2009 | 1993 Jaguar XJ6

1 Answer

1994 Juguar XJ6 Fuel shutoff valve location


Interia switch located at driver's side front door post

Aug 01, 2009 | Jaguar XJ Cars & Trucks

1 Answer

Toyota celica 93


there is no safety on these cars. some cars have an interia switch these do not. look for blown fuses

Jun 25, 2008 | 1993 Toyota Celica

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...