Question about Cars & Trucks

1 Answer

My heater just stopped working and don't have manual so where do i start trying to figure out what's wrong

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 28 Answers

If you are talking about a gas heater and the pilot light will not stay lit, you probably need to replace the thermocouple. That is the piece that is sticking into the pilot light flame. If it fails then the heater will not open the main valve. You will need to know your make, model, and serial number to get the correct part. I suggest you visit the attached website to learn about replacing the part using their video selection. To find the cheapest price for the part I suggest a web search once you find the part number. Appliance Parts Lawn Mower Parts Heating Cooling Parts 365 day returns

Posted on Nov 24, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car starts runs and drives but stops driving if I wait 30 mins car will start and drive again


I think it is the ECU (Electronic Computer Module) that had a glitch in it. If it happens again try to remove the battery negative cable for a few minutes then reconnecting it again. If it starts, it just re-programmed itself. Make sure everything is off when you do this. Radio, heater, everything.

Mar 14, 2014 | 2001 Saturn Lw 4dr Wagon

1 Answer

00 Kia Sportage blower motor stopped working. No heat or AC. I had the fan tested and it works fine. I figured it would be the resistors or relays. So I installed new-used ones, the black and blue relays...


weird one and i do feel you should call a mechanic and stop spending money you do not need too ,something is wrong with the feed and suspect the relays that you replaced are the wrong internal connections

Nov 30, 2013 | Cars & Trucks

1 Answer

I have 2001 acura 3.2tl with 200,000 miles on it. it runs fine i did a tune up used original spark plugs, new air filter and i even changed 4 ignition coils. Only problem i had with this car is when...


Plug the block heater in , End get a good battery for it, get awinter battery, Not a california battery, Then it might start, If the engine has seen it,s better days, End don,t use snake oil in it, Use real oil.

Nov 10, 2012 | 2001 Acura 3.2TL

1 Answer

Rear Wheel seized shortly after speedbump


You have something seriously wrong with the assembly of your brakes!! Get it looked at by a knowledgeable person with a picture of the correct assembly from a manual.
Don't drive it!!

Oct 17, 2012 | Cars & Trucks

1 Answer

2002 mazda millenia 2.5 v6 just replaced timing belt that was broken...double and triple checked t belt alignment is correct put it all back together....now no start...compression is 50% suposed to...


Can stop cranking. With compression figures that low, it will never start. Are you sure the figures are accurate? Throttle wide open when cranking up pressure? Compression has to be at least 100 psi for the spark to ignite the mixture.
If the belt broke while engine was running, and if it is an interference engine, you may have sustained some bent valves, internal damage to one or more cylinders, but not, I don't think, to all cylinders. I don't understand how you are getting such low compression on all cylinders Those figures sound like both head gaskets are failed, or the timing is way off.
Review your timing procedure and recheck compression. Something is definitely wrong. Hope you can figure it out. Good luck.

May 31, 2012 | Mazda Millenia Cars & Trucks

3 Answers

Car only starts when it wants to


Check crank shaft sensor and cam sensor.

Mar 09, 2017 | 2001 Ford Focus

1 Answer

The wrong antifreeze was put in my car. It had gotten gummy and I had to get a power flush so it would stop over heating. Since then my heater has stopped working which i figure the heater core will need...


If I may ask, what color was the antifreeze that you took out of your car? If the coolant is not actually overheating, the coolant temperature sensor could be bad. Check the routing of the serpentine belt. It is possible to get the belt on wrong and turn the water pump in the wrong direction, which would cause overheating because the coolant would not be circulating as it should. That would also prevent the heater from working since the coolant would not be flowing through the heater core.

Feb 12, 2011 | 2002 Chevrolet Malibu

3 Answers

When you turn on the heater makes a clicking noise out of dash and heater doesnt blow hot air


It's the "blend door actuator." Ford part # 19E616. It's a part that basically blends cool and hot air together to provide the desired climate. There's a cheapo little part of it with plastic gears that strip-out and then you get this clicking sound as though the heat is trying to work.

The part costs ~$70...install might run you around 2 hours...so I'd have to guess it's about a $200 or so fix.

I had this part repaired just over a year ago, and now it's failed again. Nothing but endless problems with the Explorer I bought brand new...actually wouldn't start a few days after I bought it and dealer couldn't figure out what was wrong...neither could 4 other dealers. No more Ford for me...ever!

Feb 17, 2010 | 2003 Ford Explorer

1 Answer

What can be wrong with my 1998 CHEVY FULL SIZE CONVERSION VAN?


Sounds like you need a fuel pump and or filter as he probably sprayed engine start into the intake.Try squeezing the fuel return line with appropriate tool that wont damage it and see if it brings it to life if it does then pump would be likely cause of the problem.

Nov 02, 2008 | 1998 Chevrolet Express

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...