Question about Dodge Cars & Trucks
Have an 04 ram quad cab 4x4. np243j transfer case is bad. wondering if I can swap in an np 244 AWD case without having to change computers and switchs and wiring?
I having once owned a Trans Shop I would
ONLY rebuild your original factory unit
NEVER,NEVER install any used transfer or
trans, in any vehicle ( that is junk out & junk in)
Doubt anyone knows your exact questions answer
Not even the trans shops that work on them
If you do not do all your own work,your in a tough spot
Then you get a rebuilt unit from Jasper Engine & Trans
or other similar company & you get a warranty
Who will you get to diagnose the issues & R&R the transfer?
If your not the one doing ALL the repairs-- your in for an expensive
& possibly unhappy situation-- down the road
Unless you get a reman from a dealer
All trans shops I know, install a used salvage yard unit,then the
Been there,done that
Just a heads up
My question: Why on a 2004 Vehicle, do you even have a problem?
Did it leak & run dry
Was it used when it wasn't working properly & continued on anyway?
Everything fails for a reason
Best find out why, before you start pulling out heavy components,
that may not be the issue
Posted on Nov 24, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tie rod end is 35 ft. lbs. Pinch bolt for the lower ball joint - 105 .I hope this helps you
Posted on Oct 06, 2009
Testimonial: "thanks for the help"
There could be several causes. You could need your tires balanced, you might have unevenly worn tires caused by loose steering parts or worn shock absorbers. Have a tire shop check the tires. If the vibration gets worse when applying the brakes it indicates warped rotors. If they have not reached minimum thickness they may be able to be resurfaced - however - resurfacing removes more material and takes away their ability to get rid of heat, meaning they could warp again sooner. Fast driving and hard braking causes the heat that causes warpage.
Posted on Feb 10, 2010
SOURCE: Dodge Ram 1500 4x4 quad
The Po700 code means that something is wrong with your transmission control module. The Po841 code means that your filter may be loose. Click on the link below to read more:
Posted on Dec 23, 2010
Welcome to FixYa.com I searched the FixYa data base and we do not have theDiagram and/or step by step that you need. However, I found a site which youcan go to get the information you need. Go to www.automotiverepaironline.net and they will have the information you seek. Thank you for using FixYa.com Your FixYa Master Tech Expert, Lee Davidian
Posted on Feb 04, 2011
Tips for a great answer:
Jan 13, 2011 | 2000 Dodge Dakota Quad Cab
Dec 15, 2010 | 2000 Ford F250 Super Duty Crew Cabs
Nov 06, 2010 | 2004 Dodge Ram 1500
Feb 03, 2010 | 2007 Dodge Ram 1500 Quad Cab Sport
Dec 08, 2009 | 2001 Chevrolet Silverado 2500HD
Sep 17, 2009 | 1996 Dodge Ram 1500 Club Cab
Sep 28, 2008 | 2007 Dodge Ram 1500 Quad Cab Sport
Nov 18, 2017 | Dodge Cars & Trucks
Nov 17, 2017 | Dodge Intrepid Cars & Trucks
88 people viewed this question
Usually answered in minutes!