Have blead the clutch peadle and its grand but still wont go in gear
SOURCE: nissan sentra 1997 starts but wont go when put in gear
is it a manual or automatic?if it's manual check clutch.if it is automatic check transmission fluid.
SOURCE: starter makes weird noise dosent turn over
you will need a new starter rebuilt ect. to replace the one you currently have that is defective. you sound like you are spinning the starter motor but the starter bendix is no longer engaging the flexplate/flywheel on the engine.
SOURCE: gearbox spinning,with clutch depressed,gearbox crunching.
needs a new clutch ,pressure plate dragging caused by worn springs
try checking your transmission oil (i had the same problem but after $30 it was fixed) it might had drained out. if your transmission oil is fine then consult a mechanic preferebly an automatic transmission specialist. may be your transmission needs a rebuild.
SOURCE: 2003 Hyundai Tiburon making a weird noise
Hello mpolci...The 2003 Tiburon was sold to the public with a defective clutch, it failed due to warpage and bad pressure plate... among other things. There are MANY class action lawsuits. Did you resurface or replace the flywheel when the clutch was replaced? Did you go with an aftermarket clutch kit, or factory? Also the slave cylinder on the 03 was known to have a defective valve.
You can try checking the levels and bleeding the system and if you still have problems, then it could
be a release bearing, a loose clutch pad, or a broken pressure plate spring....If the clutch is still under warranty, i would return it to the installer.
Good luck, i hope this helps...please rate me a fixya.
94 views
Usually answered in minutes!
×