Question about Hyundai Cars & Trucks

1 Answer

Adjust the dipped lights on a hyundai teracan

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hyundai Master
  • 44,536 Answers

The bulbs are set in the reflector to get maximum illumination and cannot be adjusted. What you have to adjust is high beam and the low beam will be automatically adjusted. Th adjust high beam (after dark) place the vehicle on level ground about 3 feet from a wall. Turn on high beam and you will notice where the centre of the beam is on the wall That centre has to be slightly below the centre of the lights ( about 1 inch) The centre should be directly in front of the lights and not out to the side of the vehicle. When the lights are correctly adjusted then low beam will be in the correct position.

Posted on Nov 26, 2014

  • stuart bradman
    stuart bradman Nov 26, 2014

    Thank you Bill, your reply was helpful to my resolving my problem. Top notch.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I check my transmission fluid on my 2005 Hyundai accent 5 speed 4 cyn


There will either be a dip stick marked transmission fluid on the opposite side of the oil dip stick or you will have to do it at the transmission itself. There will be a small dip stick or just simply a bolt halfway up. when the fluid comes out it is full.

Mar 21, 2016 | Hyundai Cars & Trucks

1 Answer

Can the headlights be adjusted in 2013 Camry


Yes they should be adjustable because people change tyre profiles front to rear and this alters the drive angle.The adjustment screws are in the headlamp housing behind lamps accessed from the hood/ bonnet side.you do need to do this properly so they align together at the legal height for full beam.there is plenty of online information on the correct height for full beam...once you have made sure all Your tyres are at the right pressure....park on level ground ...at least 3 meters from front of a wall ....and at right angles to the wall....measure the height to the centre of headlight to ground .......mark the right light horizontal line for correct height on the wall and make sure you put lights on full beam....they should shine slightly below (say an inch )to the marked the measurement of height of lamp on the vehicle....adjust until the right hand light horizon is an inch below...now mark vertical line to cross centre of reflected light....this will give you a register point to mark where the left light should fall ...this will be exact distance apart as on vehicle and again adjust left until it falls below 1inch of the measured height line of lamp on car......mark distance from right to left light and mark the same height in chalk....then adjust left light to pinpoint marked chalk cross.adjust the beams by turning the spring loaded screws behind the lights.once you are happy check dipped positions....on right hand drive the lights should dip below and left.left hand drive dip below and right.you probably didn't need so much info but ...hey it's free and it saves any misunderstanding.hope this is of help...please vote.thankyou.

Feb 07, 2015 | Cars & Trucks

1 Answer

How do I setting tps Hyundai teracan 2005


Hi , you can't set it as it comes factory, what you need to do is a can bus reset after instillation and that should fix any problems you have. Hope this helps

Dec 24, 2014 | Hyundai Cars & Trucks

1 Answer

The dip stick of my 2004 hyundai santa fe is not touching oil


take you car for repair before you destroy the engine. you are ether burning the oil or leaking it.

Jan 26, 2013 | 2005 Hyundai Santa Fe

1 Answer

2009 Hyundai Sonata automatic transmission fluid changing, How to fill the tranmission, is there a fill plug? OR should i use the


You add fluid in the same pipe the dip stick is in. Remove the dip stick and insert a funnel and add fluid through there. Check it frequently since there is no way to remove fluid easily if you over fill the transmission.

Jun 06, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

My 2005 Hyundai Santa Fe shifts really hard from 2nd to 3rd, almost as though the transmission slips


If there is no check engine light on - check the transmission fluid by pulling out the dip stick (check the level and smell the fluid if it smells burnt, there is an internal problem with the transmission) if all this is ok then the problem may be one of the speed sensos or (pulse generators)

Dec 02, 2009 | 2005 Hyundai Santa Fe

1 Answer

Gear box dip stick location- hyundai lantra automatic


try the left side of the engine... gear oils smell are diffent from the engine oil and the viscosity... gear oils are thicker... u wont go wrong on this...

Jul 19, 2009 | Hyundai Motor 1994 Elantra

1 Answer

Low beams hight beams do not work on my left side please help me


hi this may be the dip beam element blown ie bulb req's renew? or check the fuses l/h dipped beam as each h/light has seperate fuses for both dip and main beams CHECK BULB 1ST ?

Mar 08, 2009 | 2006 Hyundai Sonata

1 Answer

Head lights wont turn off


if you are saying the front side lights are going off but the headlights remain on ? then could you try this ? put the h/lights on main beam mode then whilst on main beam turn off lights if h/lights go off now ? then with lights still off put onto dipped beam with the switch/stick if h/light come on it is most probably the dipped beam headlights relay that has gone faulty as the h/lights have 2x relays 1for dip +1 for main beam if the above does not make any difference ? it may well be the switch assy hope this helps

Oct 15, 2008 | 1997 Hyundai Accent

1 Answer

Need to change headlight dipping direction


No need to replace the bulbs. They can be adjusted by most inspection stations.

Aug 07, 2008 | 2000 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...