Question about Cars & Trucks

1 Answer

99 plimouth vollager timing position marks - Cars & Trucks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

On the 2.4liter four cylinder the marks on the camshafts are between the two cam sprockets. The left (exhaust) cam mark is the notch directly to the right of the UP mark and for the right (intake) cam the notch is directly to the left of the 2.4 FRONT mark. Line those two mark up with each other. The crankshaft mark is located on the sprocket. It is a triangle pointing upwards. You align that mark with the downward facing triangle located on the engine plate directly behind the crankshaft gear.

Posted on Nov 26, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the belt in my 1990 plimouth laser


Buy a chilton or haynes service manual, after that you will know what tools to buy and where to start.

Nov 07, 2016 | 1990 Plymouth Laser

1 Answer

Ubicacion exacta de alarma vollager 97


quisiera saber en que parte se encuentra la alarma de la gran vollager

Mar 12, 2014 | 1998 Dodge Grand Caravan

1 Answer

99 amigo Timing???????


you should not change the belt maybe now its not in the same position and that's a big problem

Mar 13, 2012 | 1998 Isuzu Amigo

1 Answer

Correct position of the camshafts and cranksharfts for timing of my 99 saturn SL2


the cam shaft sprockets have marks on them that say" front" and have a hole,, the marks should be up and level on the cams,one cam says in on it and thats intake and one says ex on it and thats exhaust cam,,,the sprockets on the cams have a little cirlce at one of the teeth on each cam these face up,,and line up with the different color links on the timming chain,,,the crank sprocket only goes on one way due to the keyway the the key way faces at the 12 clock position and you will see a mark at the same 12 position on the engine block,, there is also a different colored link for the timing mark on the cranksprocket ,actually its two colored links in a row and they go at the 6 clock position on the crank,,,then put the guides on and the tensioner and set the tension

Oct 08, 2009 | 1999 Saturn SL

1 Answer

Timing chain 99 pontiac 2.4


Go to www.autozone.com and register. It is full free online repair manual plus more. Better than the books. What is it that you need to know? The timing marks and positioning?

Sep 09, 2009 | 1999 Pontiac Grand Am GT

1 Answer

I need to know were the timming mark are on a 99 ford esort


On the Camshaft Pulley and Crank Pulley. TDC is with both in 12 of the clock position, aligned with the Markers. Take care when releasing the tensioner, that these positions have not been disturbed during Installation, LOOK, because a fraction out will cause malfunction of the Ignition timing through the Camshaft Sensor.
Regards,DT

Aug 29, 2009 | 1999 Ford Escort

3 Answers

I have changed the timing belt on a 99 Dodge Stratus with a 2.4 liter engine. All timing marks are aligned properly according to Haynes diagram and the engine will still not start. It tries to start


check your distributor position,double
check all marks again,make sure when u line up
the crank marks at #1 cyl. at compression and cam shaft marks!!

G

May 28, 2009 | 2001 Dodge Stratus

1 Answer

Timing belt


There definitely is a mark. I'm tearing down a 99 Beetle now. The mark is on the center of one of the teeth and runs the length of the tooth.

You'll need to use a breaker bar and 18mm socket to rotate the camshaft. Use a pressure gauge to determine top dead center then nudge the gear until the mark aligns with the arrow on the timing belt cover behind the gear (the plastic one closest to the manifold). The alignment arrow is right around the 11 o clock position when facing the cam gear.

Mar 29, 2009 | 2003 Volkswagen Jetta TDI

1 Answer

My timing belt broke on my '99 Ford Escort ZX2. Please tell my husband how to replace it. Than k you



 
 
Timing Belt
REMOVAL & INSTALLATION
1.8L Engine
Disconnect the negative battery cable.
Remove the timing belt covers.
Rotate the crankshaft and align the timing marks located on the camshaft pulleys and the seal plate.
Remove the crankshaft pulley and hub.
If the timing belt is to be reused, mark an arrow on the belt to indicate its rotational direction to enable correct re-installation.
Loosen the timing belt tensioner lockbolt and remove the timing belt.
To install:
Temporarily secure the timing belt tensioner in the far left position with the spring fully extended, then tighten the lockbolt.
Make sure the timing marks on the timing belt pulley (crankshaft sprocket) and the engine block (oil pump housing) are aligned.
Make sure the timing marks on the camshaft pulleys and the seal plate are aligned.
Install the timing belt.
Loosen the tensioner lockbolt. Using a suitable prying tool, position the timing belt tensioner so the timing belt is taut, then tighten the tensioner lockbolt.
Turn the crankshaft two turns clockwise and align the timing belt pulley mark with the mark on the engine block.
Fig. 1: Timing marks are located on the camshaft pulleys as shown — 1.8L engines


 
Fig. 2: Make sure that the crankshaft sprocket (timing belt pulley) and oil pump timing marks are aligned — 1.8L engines


 
Fig. 3: Align the timing belt pulley mark with the tension set mark, at approximately the 10 o'clock position — 1.8L engines


 
Fig. 4: Check the timing belt deflection at the location shown — 1.8L engines

Mar 28, 2009 | 1999 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...