Question about 1997 Chevrolet Blazer
Fuses are not blown
If your lights went out and stayed out with a blown fuse, I would say you have a short in your system. But the way you describe your problem , I would look for a bad plug, or a connection that may have been made in the past that is loose. This could be anywhere in truck from engine compartment, to under dash. Possibly there was an accessary that was hooked up that may have caused this problem. GOOD LUCK FRIEND.
Posted on Nov 22, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sounds like a broken wire in the harness. look around the bumper area,sometimes along the frame. may have to peel back some tape covering. also if you have a trailer harness look closely at those.
Posted on Jun 04, 2009
Hi its rob here what make and model of car is it? it sounds like the light switch is faulty but that wouldnt stop the brake lights workin try two stop and tail light bulbs then if you have stop lights your switch is at fault
Posted on May 11, 2009
check the wiring from the tailights back to the fuse panel, it sounds like an open connection. if i recall correctly check under the dash on the drivers side near the fuse panel for a bunch of wires in a bundle and look carefully for a wire or two that are cut/shorted/or seperated, you can also check under the drivers side kick panel by the hood release.
Posted on Feb 17, 2009
I took my pathfinder to U-HAUL and asked them to check the towing lights. There was a pinched wire by my tail light and they cut it and changed it out for me, it was $5. I am so glad that I didnt take it to Nissan. My second step was going to be getting a new dimmer switch..but the guy who worked on my car said that wouldnt be the problem. He also told me that replacing a fuse that kept blowing out was dangerous and after the first time to get it checked out. Learn something new every day!!
Posted on Sep 12, 2008
i would check the connectors under the dash they have a tendancy to get loose are get hot and short a fuse this is most likely the problem...please rate this....
Posted on Sep 01, 2008
Tips for a great answer:
Jun 28, 2015 | Honda Cars & Trucks
Feb 15, 2014 | 1995 Geo Tracker
Aug 03, 2013 | 2000 Acura 3.5RL
Jun 20, 2017 | Chevrolet Silverado Cars & Trucks
Jul 28, 2011 | 1990 Ford Ranger SuperCab
Feb 11, 2011 | Chevrolet Chevy Cars & Trucks
Mar 26, 2010 | 1997 Chevrolet Camaro
Feb 07, 2010 | 1997 Chevrolet Blazer
Jan 28, 2010 | 2006 Jeep Liberty
Feb 19, 2017 | 1997 Chevrolet Blazer
80 people viewed this question
Usually answered in minutes!