Question about Cars & Trucks
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1999 GMC Jimmy won't start.
firstly where is fuel pump relay as i have never seen a GMC jimmy sorry about that but have you ever seen a foden ?? well the first thing is to check the fuse,if fuse is ok which can be checked by looking at it as its transparent or a piece of wire with a light bulb .across the battery.to find the relay is easy if you dont know where it is,When this piece of americana decides to work just turn ignition on and listen for the click of relay ,then when it doesnt start listen for click again or rather an absence of a click,sounds more like a dodgy pump in the tank or the connections going to it.when it wont start try thumping the fuel tank with the ignition on and if it is a sticky pump you might hear it start then at least you will know where the fault is.Another fault that i have come across with relays is that where the relay is passing a heavy load then its possibe for the contacts to burn inside the relay.When this happens then if it is possible to seperate the relay cover and clean the contacts with a points file (remember them ) or a piece of fine emery paper if the cover breaks taking it apart then use a bit of black insulating tape to repair the cover.Thats assuming the pump is in the tank and not bolted to the chassis near the fuel tank but that design with external pump i havent seen on a europeon car for nearly 20yrs .
Posted on Nov 05, 2008
First check any ignition/fuel related fuses. Check to make sure you have 12 volts coming into the pump and coil. If nothing to the fuel pump replace the fuel pump relay - if you do have power to the fuel pump then replace the pump. If nothing is coming to the coil it is either an ignition relay or a wiring issue. If you have 12 volts to the coil but no spark then replace the coil.
Also the fuel pump/relay would not kill the coil.
Posted on Jan 21, 2010
Tips for a great answer:
Dec 08, 2016 | 2006 Chrysler Pacifica
Nov 06, 2016 | 2006 Chrysler Pacifica
Dec 16, 2012 | 2006 Chrysler Pacifica
Nov 24, 2012 | 2006 Chrysler Pacifica
May 03, 2012 | 2006 Chrysler Pacifica
Dec 22, 2011 | 2006 Chrysler Pacifica
Feb 11, 2011 | 2006 Chrysler Pacifica
Apr 25, 2009 | 2005 Chrysler Pacifica
48 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: