Question about 2006 Cadillac DTS

1 Answer

2006 Cadillac DTS, Do the heated and cooled seats work indipendently of the cabin settings. Can you heat the seat when the AC is running?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cadillac Master
  • 22,095 Answers

No idea to be honest ,my sunday car which is a jaguar has all this sort of stuiff but i never use it in case it goes wrong,well here in spain we dont get the weather to use them and the price of petrol i can ony use it on a sunday ---occasionaly

Posted on Nov 22, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bluebirdmate
  • 1190 Answers

SOURCE: my drivers side heated seat does not get hot on my

Check the fuses/circuit breaker for the heated seats, check the switch but most likely it is the pad under the seat cover. This is a high failure item.

Posted on Sep 20, 2010

  • 268 Answers

SOURCE: heated seat won't heat up 2002 cadillac deville.

your first bet will be check the fuse for the heated seats. and go from there.

Posted on Jul 25, 2010

  • 14 Answers

SOURCE: FRONT HEATED SEATS

you need to check the resistance in each of the heated seat elements in the seat. There's a two wire connector under the back of each front seat. The connector should be green. disconnect it and measure the resistance along the circuit going into the seat. if it isnt .1 - .3 ohms, replace the appropriate heated seat element

Posted on Jan 06, 2010

  • 1608 Answers

SOURCE: 1999 Cadillac Deville Driver side power seat not working

No fuse.These seats are protected with relays and a seat module.The module is under the drivers seat.There are 3 connectors and it would be hard to check all these wires for power to the motors.First look under the seat and make sure none of the connectors came apart under the seat by something that might have been left or rolled under it.The 2 main ones you can check are the connector 2 terminal C and connector 3 terminal A.C is a black wire which is ground and A is a red wire which is the feed power wire.Connector 2 is green and 3 is black.If the ground and power wires are good then you could have a bad drivers seat module.What I would do is go to the salvage yard and find a used module to try.Good luck.

Posted on Dec 07, 2009

Testimonial: "Thanks for your assistance. Great information"

  • 135 Answers

SOURCE: How to set memory on seats

adjust seat and steering to comfortable position press set and 1 on drivers door,position will be put into memory. put seat and steering into position that it is easy to get out of car, press exit 1 and the exit position will be in memory. do same procedure for driver2.

Posted on May 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 Buick Lucerne CXL: Cooled seats not working. LIghts come on, temperature adjusters work but the motors under the seats do not come on.


Air Circulation
When the heated/cool seat switch is pressed to initiate operation of the climate control seat (CCS) system, cabin air is drawn through the heated/cool ventilation module air filter, then directed through passages in the foam of the seat cushion and seat back to the seat's occupant. In order for the CCS system to operate to its optimum performance, it is crucial to have unrestricted air flow through the system. A dirty or restricted air filter, the blockage of an exhaust air duct, a misaligned heated/cool ventilation module, or incorrect foam installation of the seat cushion or seat back will all have negative effects on CCS operation.
Heated/Cool Ventilation Module
Each heated/cool seat has 2 ventilation modules, one located under the seat cushion and one located in the seat back. These modules are controlled by the climate control seat module (CCSM). Each ventilation module contains a thermo-electric device (TED), a temperature sensor, and a blower motor. The TED and temperature sensor are mounted downstream of the blower motor. Each TED consists of a circuit of positive and negative connections sandwiched between 2 ceramic plates. Each ceramic plate is equipped with copper fins for heat exchange. The air flowing past these fins is either directed as conditioned air into the seat cushion and seat back, or directed into the cabin as waste air.
A TED is essentially a solid state heat pump that is used to heat or cool the air supply to the seat cushion and seat back. When voltage is applied to a TED, one side releases energy as heat, while the opposite side absorbs energy and gets cold. When the polarity of the current flow to the TEDs is switched, the hot and cool sides of the TED reverse.
During the following climate control seat system description and operation, the TEDs, blower motors, and temperature sensors will be referenced independently even though they are all packaged together as a module.
Climate Control Seat (CCS) System
The CCS system consists of two heated/cool ventilation modules and one climate control seat module (CCSM) that controls both the driver and passenger heated/cool seats systems. The CCSM is mounted below the front passenger seat cushion. It receives power from both, battery positive voltage and ignition 3 voltage.
Once a CCS system is activated, cabin air is drawn through the seat blower motors and directed across the fins of each of the thermo-electric device (TED) located under the seat cushion and in the seat back. The air is either heated or cooled as it passes over the TEDs. This conditioned air is then directed through channels in the foam of the seat pad and through small holes in the seat cover to the occupant. Once the system is activated, the CCSM uses a set of algorithms to control the temperature of the selected heating or cooling modes.
Your best bet is to take your vehicle to a qualified repair shop an have it diagnosed .
DTC B19A4: Driver Seat Back Blower Speed Circuit High

DTC B19A8: Driver Seat Back Blower Speed Circuit Short to Ground

DTC B103D: Driver Blower Power Circuit

DTC B272E: Driver Seat Back Blower Circuit Open
DTC B19A3: Driver Seat Cushion Blower Speed Circuit High

DTC B19A7: Driver Seat Cushion Blower Speed Circuit Short to Ground

DTC B2729: Driver Seat Cushion Over Temperature
DTC B19A2: Passenger Seat Back Blower Speed Circuit High

DTC B19A6: Passenger Seat Back Blower Speed Circuit Short to Ground

DTC B111D: Passenger Blower Power Circuit

DTC B272F: Passenger Seat Back Blower Circuit Open
DTC B19A1: Passenger Seat Cushion Blower Speed Circuit High

DTC B19A5: Passenger Seat Cushion Blower Speed Circuit Short to Ground

DTC B272A: Passenger Seat Cushion Over Temperature
Driver and Passenger Heated/Cool Seats Inoperative
  1. Ignition OFF, disconnect the C1 harness connector at the CCSM.
  2. Test for less than 5 ohms between the ground circuit terminal M and ground.
  3. ?‡'
    If greater than the specified range, test the ground circuit for an open/high resistance.

  4. Verify that a test lamp illuminates between the B+ circuit terminal E and ground.
  5. ?‡'
    If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance.

  6. Disconnect the C2 harness connector at the CCSM.
  7. Ignition ON, verify that a test lamp illuminates between the ignition circuit terminal 1 and ground.
  8. ?‡'
    If the test lamp does not illuminate, test the ignition circuit for a short to ground or an open/high resistance.

  9. If all circuits test normal, replace the CCSM.


Sorry

Jul 10, 2016 | 2007 Buick Lucerne CXS Sedan

1 Answer

Why my heated seats not working


check the switch and relay. Any heat producing component, seats , blower motors , rear window grids, have fuses and relays. If the relay is bad it does not matter if the switch or fuse is good ..Relays in GM cars are usually in a fuse box located in the engine compartment. There are two boxes one in the cabin and another in the engine compartment...check both. You must trace the circuit from it's source to the seats in order to find the problem. A schematic of the wiring would help. You may want to recheck your settings . You can turn the seats on and off for winter and summer auto start.

Feb 12, 2015 | 2003 Cadillac Seville

1 Answer

Blower motor wont run for the air or heat and none of the heated seatswork


I had a 2003 caddy dts same issue the blower motor has probably gone bad u can order them online. What u can also try is kicking under the passenger side glove box area that's where the blower is located sometimes they get stuck. Try kicking or tapping under there and see if it pops on. I did this with my car

Dec 13, 2013 | 2005 Cadillac Deville

1 Answer

2007 cadillac DTS all heated seats inop


Sounds like you may have a short in the wires at the seat. At a minimum, you likely blew the fuse. Look under the seats for a chafed and/or broken wire.

Dec 04, 2013 | Cars & Trucks

1 Answer

2007 cadillac DTS Luxery III, heated and airconditioned seats inoperative


Check all.fuses and relays associated with your seats locations will be in owners manual.

Dec 04, 2013 | 2007 Cadillac DTS Sedan

2 Answers

Where is the Battery of cadillac dts 2000?


Hello,




The battery is located under the back seat .

In order to access the battery, have to pull the seat portion up and out toward the back of the front seat.

There are 2 little black flat points about 3 inches wide that slip behind the back part of the rear seat backs. It is kind of like a up and out motion. The battery is large and heavy.

You might need to take out the seat completely in order to get to the battery. If you have heated rear seats there is small connection you may need to disconnect to free up the seat for removal. Simply disconnect it. It is a wire length connection on the rear passenger side close to the exit door threshold.

The battery has a rubber type hold down,but the the real securing point is the plastic block that is bolted down.


You have to remove the block with a socket to release the battery completely.


Seat goes back in that same motion just slip the black points under the back of the seat and push back and then down.


Good luck...

Aug 26, 2010 | 2006 Cadillac DTS

2 Answers

Heated seats not working .Light is working and fuse has not blown


If the light and the fuse are good then you probably have a open in one of the heated elements.You need to ohm the upper then the lower heater elements to see which one is bad.The connectors are under the seat.

Nov 19, 2009 | 2006 Buick Lucerne

2 Answers

Heated and cooled seats quit working. won't work on either driver's or passanger's seats. checked the fuses and relays and they are all ok. what's wrong?


Remove fuses 10 and 11 in the underhood junction box. Leave out for 5 minutes then reinstall. If the seats start working your Zephyrs dual climate control seat module will need replaced.

Apr 23, 2009 | 2006 Lincoln Zephyr

Not finding what you are looking for?
2006 Cadillac DTS Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...