Question about 2006 Jeep Liberty

1 Answer

My wpers work but fluid wont come out can u help me please

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Check the fuse. Make sure the hoses are attached to the reservoir and the nozzle where the fluid shoots out. If these are good, then more than likely you have let the reservoir run too low and now the pump is broken. These plastic reservoirs sometimes crack and could leak dry without you knowing it. You should never activate the pump without fluid in it. Most washer fluid pumps are attached or built into the fluid reservoir. You may have to replace both. If you are handy, and the reservoir is easy to access, you can probably change it out yourself. If larger vehicle parts are in the way, you may want to let a mechanic handle it.

Posted on Nov 22, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

GMC 1995 C1500 wper motor and blower motor do not work

Inside the wiper motor there's a little computer circuit board. That's most like is your problem. Replace the wiper motor and you should be good.

Jan 22, 2014 | 1995 GMC Sierra C1500

1 Answer

Where is reservoir for rear wpers on 1997 sport caravan

Here's a guide to the pump and reservoir,it has one reservior.

Apr 08, 2013 | 1997 Dodge Caravan

1 Answer

Transmission wont work after car stoped

check transmission fluid with car running in park on level ground if full is it a red color or dark brown it should be red does it smell burnt if so transmission and torque conveter will need to be rebuilt or replaced. if no fluid I suspect a broken transmission line much easier and inexpensive to replace if this helps please leave me good feed back

Feb 02, 2013 | 2004 Ford Freestar

1 Answer

Wiring diagram escort mk5

please help my car due mot on moday n wpers wnt work nether do the heater metrix as its burst n out for repair is this why?????

Jan 09, 2012 | Ford Escort Cars & Trucks

1 Answer my wpers will not turn off with pulling fuse

You need to replace the module (cover) on the wiper motor. its shorted and causes direct power

Sep 09, 2011 | 2003 GMC Yukon XL

1 Answer

Windshield wipers not working but the fuse is not burnt out

It could be the Wper Motor is bad, run two jumper wires from the Battery, one positve, one negative to the Wiper Motor connector leads and see if it will work, of not your motor is bad.

Jun 17, 2010 | 1990 Honda Accord

3 Answers

1998 audi a4 quattro 2.8

more than likely it is the ignition switch audi actually has an open recall campaign for the faulty ignition switch due to a spring inside the switch stretching causing the key to fail to return to the proper run position. i just did mine yesterday.

Aug 09, 2008 | 1998 Audi A4

Not finding what you are looking for?
2006 Jeep Liberty Logo

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides