Question about 1994 Ford Ranger Supercab

1 Answer

How do i replace front brake hoses on 94 ford ranger

Front brake lines

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Here is a good forum to find your answer.
http://www.fordrangerforum.com/exterior-tech/88010-brake-line-hose-replacement-94-xlt-2-dr.html

A few few things to remember: Purchase fresh new brake fluid and have a clean MityVac pump (both can be purchased through AutoZone, NAPA, Orielys, etc..) , plenty of clean rags, brake line clamps to stop the fluid from leaking when you initially pull the line off.
Be prepared to bleed ALL the brakes after changing the lines. When bleeding the brakes (after replacing the old lines) work from the caliper that is the longest distance from the brake master cylinder first to the shortest distance line.

Posted on Nov 22, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What solution is there for a siezed up right front brake on 1 1994 2wd ranger?


Knowing how to work on braking systems?

Education

My guess --replace a failed rubber flex hose

I don't know how much moisture & rust is in the system,
so is the caliper seized also

Jul 17, 2014 | 1994 Ford Ranger Supercab

1 Answer

1998 ford ranger repair manual for the abs brake system


If the brakes work but you have to push very hard, try checking the vacuum supply to the brake booster with the engine running.

Oct 19, 2013 | 1998 Ford Ranger

1 Answer

Ford truck xlt ranger2.3 litter oil in throttle body ? good or bad


I found out with my old 94 Ranger 2.3L that the oil breather does not have a filter element, which causes oil to "naturally" (as Ford puts it) accumulate in the throttle body and air intake hose. You can get an inline breather element at any parts store for a few bucks and install it on the breather line without harming anything, and this will stop. Cheers.

Jul 15, 2013 | 1996 Ford Ranger SuperCab

1 Answer

Replace rear brake line hose on 2000 ford ranger xl 4x4


Not a hard job it will take a lil money tho u need the steel line long enough to reach from master cylinder to the wheel then just run the line along the old line I wouldnt remove the old line from clips unless you want to end up replacing them all. Securing the new line with zip ties will work

Jul 23, 2012 | 2000 Ford Ranger SuperCab

1 Answer

I need to know the name of brake parts for a 1988 Ford Ranger. It's for the front brakes. Does anyone have a manual?


rotors,pads,calipers,brake hoses,brake lines,front brake hardware,wheel bearings and the races,grease seals i hope this helps you. richard

Apr 11, 2010 | 1988 Ford Ranger

3 Answers

1984 ford ranger 4x4 2.8l is pulling hard to left and front left wheel is smoking and locking up


Dear Smoking And Locking.......
It sure sounds to me like you are having a brake issue on the lf of your vehicle..Obviously your lf brake assembly is not releasing.You could have a seized caliper, a restricted lf brake hose, a restricted brake line, or pad material that is unsafe, it's time to get those brakes inspected ASAP!!!! Brake repairs on that year of vehicle are fairly simple for the first timer....if you need any more help just get back to me ...THX HOPE I COULD HELP!!

Nov 18, 2009 | 1984 Ford Ranger

2 Answers

How do I replace the front brake line on a 1991 Ford Ranger, 2WD, 2.3L 4cyl, truck? Any pictures available would be very helpful!


try Autozone.com they have online repair info and diagrams for a large varity of cars and trucks.
hope this was helpful

Oct 17, 2009 | 1991 Ford Ranger Supercab

1 Answer

Front Passenger brakes rubbing


Dis brakes have residual pressure thar keeps the pads in constant contact with the roter.It is very light contact, so not to worry. If left is not in contact with rotor then chk it for loose wheel bearings.

Jun 09, 2009 | 1999 Ford Ranger SuperCab

2 Answers

1991 Ford Ranger w/ABS Rear brakes lockup


sounds like you need to replace the wheel cylinders also check brake shoes and adjust properly upon reassembly

Jan 30, 2009 | 1989 Ford Ranger

Not finding what you are looking for?
1994 Ford Ranger Supercab Logo

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...