Question about Peugeot Cars & Trucks
Get the OBD codes read as this will point to the snsor/switch at fault
Posted on Nov 22, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The reverse light switch is located on the transmission housing which is behind/under the air filter housing/battery on the 2.0 litre D turbo model. To replace it you will need to remove the top of the air filter housing and the filter (2 screws plus release the air intake pipe connected to it by a large jubillee clip, also unclip a couple of cables). To remove the switch disconnect the cable clipped to it. You will need a deep 22mm socket and a universal/flexible coupling to unscrew the switch (as access is poor unless you remove the battery compartment/air filter housing).
Posted on Feb 22, 2009
o2 sensor needs to be replaced and computer reset by disconnecting battery negative cable for 1/2 hr then reconnecting. Good Luck!
Posted on Oct 20, 2011
Well its a 2009 and as such its all electronic control and it can only be diagnosed using the dealer software via the internet this is to stop people like myself from doing anything to it ,from the sound of it i would suspect the throttle position sensor under the dash on the end of the throttle pedal as this fault i have had before on more than one occasion even more so with my favourite )not( make of vehicle a renault but in all honesty you are in the hands of the dealers here as they are the only ones with access to the software via the internet with the factory ,Sorry i cannot give you a nice fixya easy type fix
Posted on Feb 25, 2012
There is an engine cover that has to come off first, then coils/wires then they are down in the valve cover, there are 4 holes and they at the bottom of those.
Posted on Dec 15, 2012
Tips for a great answer:
Jun 20, 2016 | Peugeot Cars & Trucks
May 13, 2014 | 2007 Peugeot 207 CC
Nov 01, 2013 | Peugeot 207 Cars & Trucks
Dec 15, 2012 | 2005 Peugeot 307 CC
Oct 20, 2011 | 2005 Peugeot 405
Mar 22, 2009 | 2006 Peugeot 405
364 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: