Question about 2000 Peugeot 306

1 Answer

The glass of the driver not move up & down

How can i repair glass motor

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

If it is a power window, first look in your manual and find the fuses that control the window. if the fuses are good, then you will need to replace the window regulator, inside the door, it will require removing the door panel , you will also need to try to keep the window closed while removing the old regulator, go to and look up your cars information to find the replacement ,I found this site has the cheapest prices and best quality .

Posted on Nov 22, 2014

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1997 ford Taurus driver window won't go up all other windowsill fine

The first step is to see if the regulator is bad, to check this grab glass and try to move up and down. if the glass moves then you have a regulator problem.
if glass does not move you may have a window motor problem. you will need to remove the door panel and with a test light you will check and see if there is power at the motor while pressing the up or down button, there should be power on one wire when up is pressed and then power on the other wire when pushing button down, up there is power you may have a bad motor.

a quick motor test would be with door panel off and hold down button and bang with your hand on door in area of motor and if window starts to work then motor is worn and needs replacing. good day....

Aug 22, 2013 | 1999 BMW 323 Series

1 Answer

Electric window not working

one power window not working could be window switch or window motor see if other windows will work from master switch on driver side if yes window switch is faulty,if driver side window is the one not working.check see if power going to switch and window motor the window motor could be in a bind remove disconnect the glass from window regulator see if window moves up and down not bind if yes windows move up and down the window motor is faulty or window regulator bad.

Sep 17, 2012 | Ford Ka Cars & Trucks

1 Answer

I Have A 1995 Subaru Legacy And The Driver Side Window Will Not Go Down, I Have Taken The Panel Off, But I Cannot Seem To Get The Window To Go Down Still, What Do I Do?

If this is a power window, you would have to disconnect the motor to be able to move the window glass.
If you have disconnected the motor and the window glass will not move, look for something stuck in the regulator or the tracks.

Jul 13, 2012 | 1995 Subaru Legacy

1 Answer

The driver side window of my 2004 Nissan Maxima just slid down in the door panel. I managed to pull it all the way back up. Also, before the window fell when I pushed the switch I could hear the motor...

Your window is probably still on track but the window regulator is shot and will need to be replaced if the glass moves freely and the motor spins without moving the glass.

Sep 10, 2011 | 2004 Nissan Maxima

2 Answers

The window on the back seat driver's side door slipped down, and the motor seems to be working, but I can't get it to stay up. What needs to be done for me to fix this?

you need to replace the window regulator. these are sold new on eBay and at auto parts stores. when you get it, go to a glass store which also does automotive, they can replace the old with new for about 50 bucks. it really helps to have the tools, fasteners and know how.

Jan 12, 2011 | 1994 Toyota Camry

1 Answer

How to repair front driver side widow fir st there was a grinding sound that made me think it was off track. now its not doing anything. motor works all the way up and down but glass doesnt move.

{: ) Sounds like you have a faulty window regulator. Usually the regulator cable gets broken or detached. If this is the case, your window may not move at all, even though the motor seems to be working when you switch the button up or down.
The door trim panel need to be removed totally. Once removed, you will find two bolts for the glass catch, 3 bolts for the motor, and 4 bolts for the regulator.( all #10mm )
Begin by loosening the 2 bolts on the rubber insulated glass catch, just enough to pull the glass up from its track. You may need an assistant. You need to lift the glass (only) to the top closed position, and apply a strong masking tape to hold the glass on that position for the time being.
Continue by removing the motor and regulator bolts. I hope the replacement part is readily available. I think the window regulator comes in assembly, the motor is integrated to the regulator.
When bolts removed, simply pull out and fold to remove outwards. Be sure you remember how it was mounted before you removed it.
Installation is just the reversal procedure. Position first the regulator assembly and semi-tight all the bolts. Its better if you just follow the old bolt markings. Secure motor connection.
Loosen the two bolts on the glass catch, just enough for the glass to slide and seat freely. Temporarily connect the window switch. Press the up button slowly and align the glass with the catch. When glass seated fully, tighten the 2 bolts on the catch to hold it firmly. You can remove now all the tapes you sticked.
Try to operate the window up and down carefully and observe. Make that final tightening of the regulator with the glass resting in the the full up position. Re-install the trim panel. Goodluck.

Nov 17, 2010 | 2008 Chevrolet Suburban

1 Answer

For 3 weeks, the driver window on my low mileage (19,244 mi) garage kept '99 Grand Marq LS stopped working & had no motor sound when I pushed the down switch. Suddenly today it started working. What...

Sometimes the glass will stick to the rubber weatherstripping when the windows are not used for a long time. We have that problem on our 2005 Town & Country, between air conditioning in summer and heating in winter, we rarely use the windows. Try to make a habit of dropping all the windows slightly (an inch or two is enough, just to move the glass) each time you get in the car, or at least once a week. Sometimes just opening and closing the door a few times jars the window enough to break it loose.

If that does not fix it, you may have a bad switch or motor.

Sep 06, 2010 | 1999 Mercury Grand Marquis

2 Answers

My drivers side window on my 1994 ford Taurus is stuck in the down position. how do i get it to go up and down again? the window motor is working ok. just that the window will not move

If the motor is working but the glass is not moving something must have broke inside the door. See if you can sneak a piece of duct tape down along side the glass, get it down as far as possible. Use a butter knife or something to make the tape stick to the glass, now try pulling the glass up with the tape. You may want run the window motor at the same time maybe it will catch. If you get the window up, tape it with duct tape so you can get it to a shop to get it fixed. Good luck.

Feb 21, 2010 | 1994 Ford Taurus

1 Answer

Drivers power window come off track

it is cause of the rubber run channel where the glass run up and down, put some lube oil or wd40 spray ,it will help to move glass with out resistant. but after some tome you have to replace motor, motor is weak.

Jan 24, 2010 | 2001 Pontiac Aztek

3 Answers

The drivers side window stoped working on my 2004 silverado the passenger side works fine

Try the fuse. The switch may be faulty so check by removing the inner door panel and connecting a 12v battery via two wires to the motor that winds the window up and down. If it goes up and down it's probably the switch which may just need a clean on the terminals.

Nov 01, 2009 | 2002 Chevrolet Silverado 2500HD

Not finding what you are looking for?
2000 Peugeot 306 Logo

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Wahs Team

Level 2 Expert

205 Answers


Level 3 Expert

75822 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides