Question about 1990 Buick LeSabre
Replaced bulb. It lights up when I switch to left turn signal. However doesn't flash. Both lights flash when using Hazard switch.
There is a flasher under the dash put your 4 ways on and listen for the tick noise find the flasher unit under dash area driver side there is two one for the 4 ways and 1 for turn signals now that you have found them turn on working signal touch the flasher unit you will feel it pulse and hear the noise when you have the one pulseing on working signal this will need replacing can also be in fuse area have a good day
Posted on Nov 22, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
check wire contacts in socket. If they are melted change the socket
It can be removed easily just unplug the wires.
I have replaced both front sockets on my 1999 Buick Century.
Hope this helps.
Posted on Aug 08, 2008
Gday mate, we had a problem with another late model vehicle similar to that, the bulb that was put into the reverse light was not exact brand product ( ohmage was slightly wrong ) and fowled up computer, correct bulb in place and disconnect battery to reset K A M ( keep alive memory) problem solved, BEWARE, some vehicles cannot have KAM reset except for dealer computer tethered reboot , just try putting the factory correct bulb(s) in and see how it goes, geoff. hope this helped.
Posted on Feb 11, 2012
SOURCE: No turn signals
Have you tried replacing the flasher? They're typically round, and with the fuses under/in the dash. They probably cost 10-15 bucks, usually available at your local autoparts store.
Posted on Nov 24, 2008
Back in the late 80's early 90's GM's turn signal switch in would get loose afetr some use and one side or the other turnsignals wouldn't flash or only the third bake light worked and/ or you couldn't flip your headlights to high beams and have them stay on without holding the turn signal arm back. Perhaps if turnining the bulb over as Mr. Scary suggested proves fruitless. and you may explore that option. Get an assistant and have him watch your blinkers tailights etc. and turn your blinker on and push the blinker arm firmly toward the dash and see if that resolves your problem.
Posted on May 02, 2009
replace flasher......usually located in fuse block area...listen in this area....select passenger side ...then select driver side...you can hear flasher clicking...you have seperate flashers for each...FLASHERS are small cubes plugged into fuse block....probable bad driverside flasher
Posted on May 09, 2009
Tips for a great answer:
May 31, 2015 | 2012 Nissan Rogue
Sep 08, 2013 | 2007 Toyota 4Runner
Aug 31, 2013 | 2003 Dodge Caravan
Jan 18, 2013 | 1995 Pontiac Grand Am
Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars
Jul 10, 2012 | 1999 Plymouth Voyager
Sep 03, 2010 | 1999 Chevrolet Silverado 1500
Mar 26, 2010 | 2000 Ford Focus
Apr 05, 2009 | 1992 Isuzu Rodeo
204 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: