Question about 1998 Chevrolet Lumina

1 Answer

My right back tire won't move?

Took the drum off, took adjuster

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 3,225 Answers

If you have the drum off and it won't move, I suspect the bearing? What else could it be?

Posted on Nov 21, 2014

Testimonial: "The drum won't go back on"

  • jack layton
    jack layton Nov 22, 2014

    If the drum won't go back on, have to use adjuster to bring brake shoes inward.

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: 2000 impala had new tires and front end aligned

one of your ty rod ends

Posted on Jul 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What can be causing a knocking sound coming from the right rear tire when I press the breaks


When they adjusted the brakes ,its possible they made it so you can now hear an existing issue. What's most likely happening is that your slave cylinder has frozen in one position. What this causes is for only one brake shoe to expand, not both. I'm assuming that they are drums in the rear. Replace and bleed both slave cylinders, problem solved. This exact problem happened to me about 6 months ago.

Oct 19, 2014 | 2000 Saturn SL

1 Answer

Had rear brakes replaced about a month and half, had a thunking noise. took back, said i had tar on tire causing noise. said it would go away, after 3 to 4 weeks got worst, only heard noise when applying...


Hello and welcome to FixYa!

Even if you are missing a lug nut it won't make a noise if the rest are tight. I suspect that the problem will be on the wheel bearing. The wheel bearing can be worn out that's why you hear a noise. I suggest that you go for the wheel bearing replacement to resolve the issue.
Hope this helps and thank you for using FixYa! Have a good one!

Sep 03, 2011 | Dodge Caravan Cars & Trucks

1 Answer

1999 F250 4x2 - was stored for 3 months and when I tried to move it - the right rear wheel turns but the left rear wheel won't turn. Took off the brakes and caliper - still won't move. I can move...


Hello, The rear rotor has 2 sets of brakes on it. The other thing is to look for slight movement in the driveshaft when it clunks. Depending on the rearend, some have to have both rear wheels off the ground to turn each side. And of course the trans in Neutral.

With the rear wheel you have an Emergency brake and a drum brake inside the center of the Rotor.
The rear of the brake backing plate has a rubber plug which is covering the Star-wheel adjustment for those drum brakes. You can try to loosen the Star-wheel to disengage the Emergency brake shoes. You can try pulling the brake cables toward the cab, to loosen the cables.

If this does not help, your Emergency brake shoe probably rusted off the brake mount and is jammed inside the drum. The linings fall off the metal like banana skins. I can tell you that if the Emergency brakes are a State safety requirement, you need to consider new rotors because the drum portion is usually trashed with rust.

I hope my Solution is very helpful to you.

Jun 11, 2011 | 1984 Ford F 250

2 Answers

Had a flat tire on my GMC Sonoma. Changed the


wheel rim damaged ?? locating pin for wheel not lined up

May 16, 2010 | 1993 Nissan Altima

2 Answers

When I apply the brakes on my '02Dakota only the forward brake shoe moves against the drum. Have replaced wheel cylinder but makes no difference. Both shoes move when I loosen adjuster cable. Have this...


you mean parking brake cable? loosen parking brake cables put drums on , and adjust shoes till they lightly drag, now apply brakes a few times and check the adjustment again, if all ok, now adjust park brake cables, you want to adjust so park pedal goes 5-8 clicks till the wheels are "locked up" and the wheels spin free with the park brake off

Oct 18, 2009 | 1992 Dodge Dakota

1 Answer

1993 Toyota Corolla rear brake adjustment?


ok to adjust the shoes first obviously have the shoes set up with springs and everthing ready to go ,,then youl see the straight roundish threaded bar running in the middle from shoe to shoe and attached a round piece which can move using a flat head,,but you need to use another flat head to pinch back the little arm thats connected to the piece your adjusting ,,thats just ther to prevent the shoe from moving itself,,youl no when you look what i mean... hope this helps,,,

Apr 24, 2009 | 1993 Toyota Corolla

1 Answer

Right rear wheel has rubbing and grinding noises, as on cast iron


My advise is to adjust the rear brakes. The drum should not move in a side to side fashion. adjusting the brakes will also more than likely take care of that anti lock brake light also. adjust the brakes up to where the rear wheel will spin but you should be able to hear the brake show dragging slightly on the drum.

Apr 06, 2009 | 2001 Mitsubishi Eclipse Spyder

1 Answer

Rear brakes 2000 ford focus zts


emergancy brake cable is froze holding the brake on

Mar 20, 2009 | 2000 Ford Focus

2 Answers

Tire pressure light remains on.


We took it back to the dealer. They made the necessary adjustments needed after the winter tires +rims were put on.

Nov 19, 2008 | 2008 Ford Focus SE Sedan

Not finding what you are looking for?
1998 Chevrolet Lumina Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...