Question about 2001 Ford F150 Styleside SuperCrew
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There is a special sequence for that. Let me see if I can remember... Pull to a level surface, put the parking barake on, put the truck in neutral, shift to four-wheel drive, release the brake, shift to drive.
The computer waits for this sequence. It has been many years since I did this. If it doesnt work, call your dealer shop and they will tell you the correct sequence.
Posted on Dec 21, 2009
i will explain this in the best manner that i can
it may take a couple of post but i will get it all ok
There are many things that can cause your ABS light to come on. Some are serious, so you should never just ignore the light. But there are times when the light comes on and can be met with a simple solution. For instance, a dirty ABS wheel sensor can cause the system to trigger the ABS light during self evaluation. You'll be shocked when you see how much road gunk can accumulate on this very important sensor. Even if your ABS light hasn't made an appearance, it's a good idea to clean the sensor. A good time to do it would be during brake pad replacement when you have the wheels off anyway.
What You'll Need:
Locate the ABS wheel sensor. Remove the bolts that attach it to the rest of the suspension. You may also need to remove a few bolts to pull the sensor away from the vehicle for cleaning. Follow the line to see if there are more bolts. Remember not to force it or pull too hard. Then along the line theres another two 10mm bolts, that need to be removed, just follow the abs sensor line to get at them. With the sensor free, take your rag and wipe the sensor until its clean. I prefer not to use any chemicals on the sensor to avoid potential problems. If you need to, use mild soapy solution and rinse well. Reinstall the sensor in the same manner it was removed.
Posted on Jan 03, 2010
Flashing CEL is an indication of a misfire. You would need a code scanner to find out which cylinder it is.
The code should be a P030n where n= 1 to 8 ( the cylinder number ). Could be a P0300, which is a misfire indication.
Posted on Jan 28, 2011
Tips for a great answer:
Sep 12, 2011 | 2001 Ford F150 Styleside SuperCrew
Oct 19, 2010 | 2001 Ford F150 Styleside SuperCrew
Dec 21, 2009 | 2001 Ford F150 Styleside SuperCrew
Jun 01, 2009 | 2002 Ford F150 Regular Cab
Feb 08, 2009 | 2001 Ford F150 Styleside SuperCrew
Jan 05, 2009 | 2001 Ford F150 Styleside SuperCrew
Oct 01, 2008 | 2002 Ford F150 Regular Cab
88 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: