Question about Cars & Trucks
The vacuum line has probably slipped off of the flapper that controls airflow to that side, or the hose is cracked.
Posted on Nov 29, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sounds like the drivers temp door actuator is not working should be located on the drivers side of the air box down by the gas pedal or center dash area.
Posted on Nov 06, 2008
SOURCE: 03 chevy tahoe
There are seperate blowers for the front and rear air. It is most likely either your blower motor or the resistor, both located under the passenger side dash. I got a blower from a salvage yard for $25, But ended up having to get the resister from the dealership for about $130. Hope this helps.
Posted on Jan 20, 2009
no, The blend door air motor in the dash is not moving to re direct the air.
I would have the vehicle checked out by a local shop.
Posted on Aug 15, 2009
First....buy a drivers side air flow actuator at a auto parts place for dual zone heating/cooling.
(NAPA etc will have it.....or the dealer)
Open the glove compartment.....all the way....you may have to take the screws out at the bottom......look in at the heater assembly....look over to the left....you will see the two air flow actuators.
Look at the part you have and match it to the part on the heater assembly.
The actuator that is closest to the engine is the drivers side control.
Try your controls and check for heat and cooling on both sides.
The stepper motor in these actuators goes bad on quite a few...but over look that.....you have a great car,good for many miles of trouble free driving.
Posted on Nov 03, 2009
your blend door on your passenger side is most likely stuck in the cold position. Chances are you cable is broken. Good luck.
Posted on Dec 30, 2009
Tips for a great answer:
Jul 26, 2016 | 2004 Chevrolet Silverado 2500HD
Jan 21, 2016 | Cars & Trucks
Apr 20, 2014 | 2010 Ford Flex
per your problem mentioned. There are few solved help links to
troubleshoot these problems. Go through the list and Click the link below:----
These will help.
Nov 28, 2012 | 2006 Ford Taurus
Dec 14, 2017 | Cars & Trucks
Jun 11, 2011 | 2001 BMW 330
Jan 05, 2010 | 2008 Dodge Nitro
Jun 16, 2009 | 1999 Chevrolet Venture
Oct 03, 2008 | 1998 Buick Park Avenue
20 people viewed this question
Usually answered in minutes!