Question about 2002 Hyundai Santa Fe
Check the fuses first. Then if that is not the problem, it could be a bad connection on one of the wiring posts called a bus.
Posted on Nov 21, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2002 HYUNDAI SANTA FE
I had the same problem with a 2003 Hyundai Santa Fe. While driving to work as I pressed on the gas the brake and battery light would come on. When I applied the brake, the lights would go off. When I got to work I turned the car off and then tried to start it, nothing. The car made a funny sound while running and I could smell somethig smoking. I replaced the alternator and all is good again. When removing the alternator the bottom lifts off the mounting bracket, you cannot drive the bottom bolt back through the mount as I tried to. Simply remove the nut on the bottom bolt and remove the top bolt, then lift the alternator out.
Posted on Oct 26, 2008
If you live in the US, take it to qany Auto Zone store and thy will read the codes off for you, I would suspect any right thinking competitor would do the same, check if you don't have one near by.
Hope this is of some help.
Posted on Apr 21, 2009
This is from the factory service manual of your car:
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. Translation you need the dealer to do this.
Posted on May 22, 2009
There is NO open recall on the Santa Fe, However, there is one on the 1999-2004 SONATA (EF) and 2001-2004 XG300/XG350 (XG) vehicles that are registered and operated in specified “salt belt” states may exhibit corrosion damage to the subframe assembly. If specified levels of corrosion damage have occurred as described in this bulletin, replace the front subframe with a new subframe that incorporates additional holes in the upper and lower panels. If a front subframe does not require replacement, add drainage holes and treat the subframe with rust-proofing material.
Posted on Oct 03, 2009
Tips for a great answer:
Jun 13, 2015 | 2002 Hyundai Santa Fe
May 31, 2014 | 2002 Hyundai Santa Fe
Feb 27, 2014 | 2002 Hyundai Santa Fe
Nov 06, 2011 | 2002 Hyundai Santa Fe
Aug 25, 2010 | 2002 Hyundai Santa Fe
Aug 04, 2009 | 2004 Hyundai Santa Fe
Jul 07, 2009 | 2001 Hyundai Santa Fe
Sep 28, 2008 | 2003 Hyundai Santa Fe
Apr 02, 2017 | 2002 Hyundai Santa Fe
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: