Question about Cars & Trucks

1 Answer

Hi I replaced the switch also no change check mico s also its like a sigal problem I think. the door key opens the window from outside,, the passenger window opens from the driver side switch I ckd t

CHANGING DRIVER SIDE DOOR WINDOW CHECK CURRENT TO SWITCHES IT OK I FOUND NO CONNECTION PROBLEMS .ALL I did was replace the window regulator and window motor.. its a simple job thanks leon

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 15,966 Answers

You did not post the year make and model of the car but those items are controlled by a BCM.

Posted on Nov 21, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota Kluger 2007/8 glass hatch opens up when I turn the ignition key to start the engine. Sometimes also when open the car with the remote button.


Hi There,
I wish I could help you, but maybe I can do the next best thing. Turns out lots of other Toyota owners have experienced your problem. They write about it on this forum:
http://www.toyotanation.com/forum/122-2nd-generation-2008-2013/405421-rear-hatch-opens-when-started.html
So I think if you keep an eye on this forum, someone will come up with a solution. If it was me, (since I have replaced power window guts, I would take the door apart, get some electrical tape and look for a possible short.

I hope this helps you!

Feb 12, 2017 | Toyota Cars & Trucks

1 Answer

I have an 06 pt cruiser when I bought it couldn't open door from inside. Suddenly door opens from inside and window won't come down what's the problem


Tests/Procedures: 1. Check the power and ground at the master switch mount in the dash. Pin 12 is power at key on and pin 4 is the ground.

2. Next try driving the left front window by applying power to pins 13 and 14, switch polarity should drive the window up and down. If not, check for broken wires in the between "A" pillar and the door, then gain access to the window motor and try applying right at the motor.
Tests/Procedures: 1. Check the outside door handle switch. It should ground the Orange/Yellow wire when the handle is raised. Tech Tips: The power window should drop slightly whenever the door is opened. The ensures a tighter seal to the convertible top.

May 04, 2015 | 2006 Chrysler PT Cruiser

1 Answer

Rear passenger door on a 2006 nissan sentra wont open from the inside or the outside


If power windows and the same window does not open the child safety switch is a very good possible reason.

Jun 14, 2012 | 2006 Nissan Sentra

1 Answer

Driver door sensor broken


inside the mechanical lock (The part that actualy holds the door shut when you close it) there is a switch that informs the control unit that the locking mechanism is either locked or unlocked. (door open or closed).

These switches fail sometimes, when this happens the control unit is not aware that you have closed the door
If the faulty switch is not informing the control unit that the door is closed, the central locking will not try to lock the door (because it thinks the door is still open).
The switch is integral with the lock unit, and they are not easy things to replace either.
remove the internal door trim. unplugg the wiring inside. remove the outer key barrel and unhook the cable from the outer handle to the lock unit. unbolt the lock unit. the window regulator will have to be unbolted from the window (remove the 2 plastic circular access panels and wind the window down to a level at which the 2 bolts are visible), lift the window clear once unbolted (using your hands, slide it upwards in its guide rails, stick it in place with tape).
once this is done the window regualtor can be unbolted (10 or so bolts) and removed, complete with the door lock.

Feb 22, 2010 | 2001 Volkswagen Passat

1 Answer

Power window open partially with inside or outside


inside the mechanical lock (The part that actualy holds the door shut when you close it) there is a switch that informs the control unit that the lock is either locked or unlocked.
These switches fail sometimes, when this happens the control unit is not aware that you have opened the door, and therefor will not wind the window down slightly.
The switch is integral with the lock unit, and they are not easy things to replace either.

Feb 20, 2010 | 2003 Volkswagen New Beetle Convertible

4 Answers

97 Passat left front door won't open from outside - will open from inside if lock knob is pulled forcefully. I have new outside handle (not yet installed). All locks open properly with key. I have sought...


Hi.
Heat will not help and can damage the door lock mechanism further.
You can try lubing the door lock, but I do not thing it will help. I think there may be something wrong with the mechanism, or you will get the same problem from outside and inside.
If the door is opening from the inside , then the door lock mechanism My still be working. On VW the outer handle is connected to the lock by a steel wire, or by a metal shaft.
To access the door lock you need to remove the internal door panel. The door panel is held by hidden screws located on handles and by a set of clips located behind the panel near to the panel border.
I have service manual for several VW models, I will see if I can find the manual for 1995-1997 Passat and I will eventually send the diagrams to undo the door and access the lock.

Dec 30, 2009 | 1997 Volkswagen Passat

1 Answer

Hi have a 2004 passat saloon and the n/s rear door will not open from the inside or from the outside, think it may be dead locked


Remove the drivers side door unit with window switches etc and clean the socket underneath and all should work like new.Removal is the black curved trim in door grip, prise&pop out then switch unit is free.

Nov 17, 2009 | 2004 Volkswagen Passat

1 Answer

Electric windows


Hi. the windows no longer work from drivers switch or each switch on the doors? I would turn key on not starting vehicle with door open (drivers) push each switch one at a time while watching dome lamp if dome lamp dims the motor is stuck if no diming occurs start witha window switch.

Apr 27, 2009 | 2005 Ford Escape

2 Answers

I need to change the lock in my drivers side door


first with the L/F window lowered, remove the door trim. Before disconnecting window switch, raise the window all the way up . Now, look inside the door to where the lock cylinder is. You need to unclip the attached linkage to the lock cylinder. Remove "C" clip, ( careful you don't damage outer door panel ) securing cylinder to door and remove lock.

Apr 05, 2009 | 1989 Chevrolet G20

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...