Question about 2002 Chevrolet Malibu

1 Answer

How do you disconnect a car start in a 2002 malibu

Car starts it self and doors lock and unlock on it own! Just want it disconnected!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 7 Answers

If its after marker remote start is behind your radio take your radio out and you will see the connections disconnect the reds cables from the after marker alarm or 30amp fuses green colors

Posted on Nov 21, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My BMW Z3 I took the battery out now my doors will not lock or unlock but if I try to unlock door car will not start but if I disconnect the bat and put back and don't try doors it will start I need...


Put your key in the ignition switch it on and back off remove key no PRESS AND HOLD UNLOCK BUTTON without releasing the unlock button press the LOCK button 3 times within 10 seconds doors should lock and unlock rapidly to confirm it worked you must do this sitting in the car with doors and windows locked

Apr 07, 2014 | Cars & Trucks

2 Answers

Lockout protection


no idea here but i do not like self locking cars that lock me in ,sorry but none of my cars have this as i disconnect it if i can ,i do feel this self locking is dangerous and can cause unecessary deaths,notice you have a male name so why are you worried about a self lock car whilst driving ,ever tried to get some kids out a buring car and find its self locked and the accident didnt throw the door locks off then watch them die as the fuel tank went up before i could find anything to smash a window .Not a nice sight

Jan 20, 2013 | 2005 Chevrolet Equinox

1 Answer

My Yukon won't start.


My 02 trailblazer pulled that stuff on me. Finally disconnected both battery posts, touched together for 60 seconds. Pulled both PCM fuses together, reinstalled, reconnected the battery and started fine. Gremlins at play I guess.

Aug 02, 2017 | 2004 GMC Yukon

1 Answer

I had to break in my car and now my theft system is on and i cant start my car


Depending on the system you have installed... There is a reset procedure that must be done... It entails you first using the remote to lock the doors then get into the car by unlocking the door with the key get in the car and lock the doors, turn the key on, then off, manually unlock the door, open it exit the car after manually locking the doors. Close the doors... next unlock the door with the remote and all should be well. If not disconnect the battery for 10 minutes and retry. Hope this works

Jul 18, 2011 | Mercury Sable Cars & Trucks

1 Answer

The doors lock automatically on my daughter's '99 Cougar. This has happened to me when I left the keys in the ignition and closed the driver's door. After AAA came and unlocked the doors, I removed the...


shorted wiring in doors or shorted door lock actuator in door. A grounding of a wire makes them lock normally. SO, any bare wire touching metal will ground it and lock the doors.

Principles of Operations
The Door Switch Lock Function When a door lock switch is moved into the lock position or a door lock cylinder is rotated to the lock position, the door lock switch grounds the lock circuit input to the central security module (CSM). The CSM then provides 12 volts to one side of the door lock actuators contained in the door latch unit and simultaneously grounds the other side of the door lock actuators. This completes the door lock actuator circuit, causing the door lock actuators to rotate a cam assembly, which then locks the doors. The 12 volts that the CSM provides to the door lock actuators are provided to both door lock actuators from a single pin on the CSM electrical connector.
The Door Switch Unlock Function When a door lock switch is moved into the unlock position, the door lock switch grounds the unlock circuit input to the CSM. The CSM then provides 12 volts to the opposite side (relative to locking the door) of the door lock actuator(s) contained in the door latch unit and simultaneously grounds the other side of the door lock actuator(s). This completes the door lock actuator circuit, causing the door lock actuator(s) to rotate a cam assembly in the opposite direction, which the unlocks the door(s). The 12 volts which the CSM provides to the door lock actuator(s) are provided to each door lock actuator from the individual pins on the CSM electrical connector.
--------------------------------------------------------
CSM Self-Test The CSM has a self-test which can be entered into by using a diagnostic tool. This self-test will monitor the following CSM door lock inputs:
  • Unlock switch (DTC B1311)
  • Lock switch (DTC B1300)
  • Exterior lock switch (DTC B1309)
  • Exterior unlock switch (DTC B1341)
Before running the self-test, the following conditions must be met:
  • The ignition switch must be in position II
  • The driver and passenger doors must be unlocked
  • The driver and passenger doors must be opened
  • The hood and liftgate must be closed
  • The set/reset switch, and liftgate release switch are not actuated
It is important to note that all of the diagnostic trouble codes (DTCs), with the exception of B1551 and B1553 can be retrieved with the self-test. DTCs B1551, and B1553 are continuous and will only be retrieved if the liftgate release is operated prior to retrieving the continuous DTCs.
Inspection and Verification
  1. NOTE: Make sure that the battery is fully charged before starting electrical diagnosis.
    NOTE: Prior to carrying out the CSM Self-Test, make sure that both the driver and passenger doors are open.
    Verify the customer concern.
  1. Visually inspect for obvious signs of mechanical and electrical damage.


Visual Inspection Chart Mechanical Electrical
  • Binding latch mechanisms
  • Binding linkage
  • Misaligned door
  • Central junction box (CJB) fuse(s)
  • Wiring harness
  • Electrical connector(s)
  • Door lock switch(es)
  • Door lock actuator(s)


Module Controlled Functions
The central security module (CSM) covers the following functions:
  • Central door locking
  • Double door locking
  • Anti - theft alarm incorporating
    • forced entry
    • radio theft
  • Radio frequency remote control of
    • central door locking
    • panic alarm
    • driver door unlock
    • liftgate unlock
For additional information, refer to Section 419-01A Anti - Theft - Active, Section 501-14A Handles, Locks, Latches and Mechanisms, and Section 501-14B Keyless Entry/Computer Operated Locks.

The CSM is in the passenger side kick panel I think.

Good luck

Jan 25, 2011 | 1999 Mercury Cougar

1 Answer

Security system went off after replacing battery now car wont start nor fuel pump will turn on.how do i fix


You might just need to reset it. Roll the drivers window down and close all the doors. Lock all the doors with the key ) turn the key to lock twice, The electric locks should lock all the doors. wail a few minutes and unlock and open the trunk with the key. relock the truck or just close it. unlock the drivers door with the key, twice. all the doors should unlock, get in and start the car. Now this does'nt always work. If it does'nt we'll make the system think it's running. Close and lock all the doors. open the hood and disconnect the battery, one ccable will be fine. wait a few minutes. Reach in though the open window and turn the key all the way on. Don't open the doors, go around and connect the battery hard so it does'nt jump or skip. Reach thought the window and start the car/ once it's running. turn it off remove the key and unlock the door from the inside and open the door ( as if you were inside.) get in and start the car and everything should be back to normal.

Nov 26, 2010 | 1997 Infiniti.5 J30

1 Answer

I can't disable my anti theft device on my chevy malibu 2004 and my car will not start


This usually works.Lock the doors with the remote.Press lock twice sounding the alarm.Then press the unlock button twice.Your car should start now.If that doesnt work try this,Lock the car again with the remote once.Go over to the passenger side door and use the key to unlock the door then press in the door unlock all doors.Hopefully by now it worked.Now if none of these work your security probably malfunctioned and theres only two things that will work,One is disconnecting the battery for 5 mins then reconnecting.unlock doors.the start.If that doesnt work you'll have to take it to the dealer to get the security reset or replaced.The steps I have wrot you are the diagnostics to reset it.I hope these work for you and good luck.See ya had have a great day..

Mar 31, 2009 | 2004 Chevrolet Malibu

1 Answer

94 Camry Wagon ignition blocked, doors self-lock, flashers on


you may have had a bad connection at the battery that would cause this kind of problem

Dec 14, 2008 | 1994 Toyota Camry

Not finding what you are looking for?
2002 Chevrolet Malibu Logo

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...